Fire stopping in Canisbay
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Canisbay. Send details for a fixed quote.
- Openings found when ceilings come down for a refit
- Non-fire-rated filler around services
- Service penetrations left open after M&E works
Fire stopping in Canisbay
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
What the job involves on each surface
Drylining partitions
Holes in board are often cut larger than needed. If the gap exceeds the tested range, sealant alone won’t do, and the detail may call for board patching or another product.
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. The detail limits bundle size and the gaps between and around cables.
How we handle fire stopping in Canisbay
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. Each seal follows the manufacturer’s tested detail, not a rule of thumb. If you have unsealed openings around new pipes and cables and head-of-wall gaps with no fire seal, we can help, on pipe penetrations, joints between fire-resisting walls and floors and cable penetrations alike. Searching for sealant specialists in Canisbay? We have been sealing commercial buildings since 2005.
In smaller Scottish places like Canisbay, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
A 12-month guarantee applies to all our work. Should something we installed fail, speak to us on 01277 525 020 or send details through our quote form and we’ll come back to it.
- Place
- Canisbay (KW1)
- Region
- Highland
- Guarantee
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Diagnose, treat, sign off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Tell us who will meet us and how to get in at your building near Canisbay. That goes into the plan alongside the quote.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Confirm the product named in the specification
- Point out parking and an unloading spot
- Move anything stored against the joints
Get a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or call the office on 01277 525 020 or use the quote form to discuss it first.
Read more
Commercial clients in Canisbay
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Canisbay can sit alongside others in a wider programme.
If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.
Why deal with it now?
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. While the openings can be reached, sealing them is normally straightforward. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, giving water time to get in. Resealing early avoids that.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
What you get with us
- A fixed quote before work starts
- Health and safety: CHAS accredited
- One contact handling all your sites
- Over 20 years of commercial sealing
Read how commercial sealant jobs are priced or how we’re accredited.
Fire-rated sealing for Canisbay buildings
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail. There are a number of hotels within about 2 miles of Canisbay. In hotels, bedroom and corridor walls are normally fire-resisting, so services added in a refit need sealing with the specified product.
For buildings in and around Canisbay, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Canisbay is about 15 miles east of Thurso, in Highland. Our applicators travel to Canisbay for work on service penetrations, handled exactly as we handle every other area. 256 places across Highland fall within our area, including Canisbay.
Postcode districts covered here: KW1. Nearby places we also cover include Rattar (5 miles west), Scarfskerry (6 miles west), Keiss (7 miles south), Dunnet (8 miles west) and Brough (9 miles west) for service penetrations. Further afield, our area takes in Thurso (15 miles west), Wick (13 miles south) and Castletown (10 miles west). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Local landmarks in Canisbay
Well-known places in the area include Castle of Mey (3.8 miles west) and The Last House Museum & Gift Shop (1.9 miles east). For a walk, there’s Loch of Mey and Cairn Hill.
What sealant work can’t fix
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- Gaps in walls that were never built as compartment walls
- Large openings beyond what any sealant detail covers
- Deciding what a wall or floor needs, which belongs to the designer
If you’re not sure, just call 01277 525 020 or email us and we will give you a straight answer before you book.
Joints and surfaces we work on
- Service gaps in risers
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
- Joints between fire-resisting walls and floors
Common problems we fix in Canisbay
Openings in fire-resisting walls typically appear when services are added or changed. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser can leave the hole behind. Across several fit-outs, the openings add up.
These are often picked up first by site or facilities staff:
- Open linear gaps along the top of fire-resisting walls
- Old intumescent sealant that has split away
- Unsealed openings around new pipes and cables
- Expanding foam used as fire stopping
Halls and meeting rooms at places like Canisbay Parish Church sometimes gain new services, and any compartment wall crossed needs the specified seal.
What your quote should include
- Proof of insurance
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- What the guarantee covers, and for how long
- Who will actually carry out the work
Questions about Canisbay
Is Canisbay too far out for you?
Not at all: smaller places are covered as well as towns. We work across every Scottish council area. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Can you seal around new services in a hotel near Canisbay?
Yes. We install fire-rated and intumescent sealant where it is specified. Each seal follows the tested detail, and rooms are done in turn.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
What site paperwork can you supply?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
Does the weather affect the work?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
What will the job cost?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote and we will price it properly.