Fire Stopping in Puckaster
Looking for fire stopping in Puckaster? It’s simple: send details, get a quote, we seal, guaranteed.
- Unsealed joints where partitions meet the slab
- Fire-rated sealant that has cracked or shrunk back
- Hidden openings found during inspections
Fire stopping near Puckaster
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How the job changes by surface
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. Bundle size, cable type and the space between cables all matter and we work within those limits.
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers.
Fire stopping in Puckaster
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. We match each opening to that detail before any sealant goes in, and raise it with you if it falls outside. If you’re dealing with unsealed penetrations discovered above suspended ceilings and openings left by services added after handover, we can help, on linear gaps at wall heads, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows alike. Whoever orders the work in Puckaster, the brief is normally the same: a clear scope, tidy work and joints that don’t fail again.
Around smaller places like Puckaster, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Location
- Puckaster (PO38)
- Region
- Isle of Wight
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Honest limits
Before quoting, we check that sealant is the right answer. It won’t put right:
- Issuing fire ratings or certificates for seals
- Construction that lacks the fire resistance the seal relies on
- Deciding what a wall or floor needs, which belongs to the designer
If you are not sure, just speak to us on 01277 525 020 or email drawings and photos and we will give you a straight answer.
Surfaces we seal
- Linear gaps at wall heads
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Cable penetrations
Diagnose, treat, sign off
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself typically taking anything from one day to a planned run of visits, depending on the number of seals and the access. If others near Puckaster need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Share your working hours and any access restrictions
- For older buildings, check the asbestos register before work
- Warn occupants and staff about the work
Quotes
Need a figure for a tender or a budget? We will quote against your scope and drawings you can plan around. If you have questions first, call the office on 01277 525 020 or email us.
Related advice
Fire stopping in Puckaster: the local picture
Fire stopping of openings and penetrations in England falls under Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail.
Halls and meeting rooms at places like Church of St. John the Baptist sometimes gain new services, and any compartment wall crossed needs the specified seal. For a school such as Niton Primary School, penetration sealing fits best at the end of the summer works.
Puckaster is about 6 miles south-west of Shanklin, in the Isle of Wight. Across the PO38 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Across the Isle of Wight, 125 places are covered, including Puckaster. Sites around Portsmouth have their own page, roughly 18 miles from Puckaster.
If you need fire stopping in PO38, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Puckaster Lane and Undercliff Drive are within our area. Just outside Puckaster, we also work in Niton (1 mile north), Blackgang (1 mile north-west), Bierley (1 mile north), Whitwell (2 miles north-east) and Nettlecombe (2 miles north-east). Further afield, our area takes in Newport (8 miles north), Ryde (11 miles north-east), Cowes (12 miles north), Sandown (7 miles north-east), Shanklin (6 miles north-east) and Ventnor (3 miles east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Landmarks near Puckaster
Locally, jobs take us to sites close to The Buddle Inn, among other places. Nearby you will also find Arthur Webster Memorial Hospital for Children (5.9 miles north-east) and Blackgang Sawmill Museum (1.5 miles north-west). The countryside around Puckaster includes Stenbury Down.
After the work
Sealant joints are maintenance items, and how long they last depends on how they’re treated. We suggest:
- Brief every trade that openings they make must be sealed
- Check risers and ceiling voids after each round of works
- Check with the data sheet before painting over fire sealant
- Treat an open penetration as a priority repair
Keep the product data and installation details with the building’s fire safety information. It makes later repairs much easier to match.
Looking at service areas on a regular cycle pays off. Catching a damaged seal early keeps the fix small.
Questions we are asked in Puckaster
What does the BS 476 change mean for fire-rated sealant in Puckaster?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Is hospital work, at somewhere like Arthur Webster Memorial Hospital for Children, something you do?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
When can you be on site?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
Do you offer coloured sealant?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
How do you choose the sealant?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
What else we do in Puckaster
Common problems we fix in Puckaster
Most open service penetrations are left by later work. New cabling, rerouted pipework or a data route drilled through a riser leaves an opening that nobody returns to. Across several fit-outs, the openings add up.
Site and facilities staff are often the first to spot these:
- Openings left by services added after handover
- Open linear gaps along the top of fire-resisting walls
- Builders’ foam or ordinary silicone in compartment walls
- Fire-rated sealant that has cracked or shrunk back
Hospital estates such as Arthur Webster Memorial Hospital for Children, 5.9 miles to the north-east of Puckaster, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Before you book anyone
- What the guarantee covers, and for how long
- Which product they’ll use, and why it suits the joint
- What level of public liability insurance do they hold?
- Will CSCS-carded applicators be on site?
When to bring in a specialist
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.