Fire-rated sealing and fire stopping in Noke Common, Isle of Wight
Fire-rated and intumescent sealing of service penetrations and linear gaps in Noke Common and across the Isle of Wight. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Penetration schedules that need working through
- Non-fire-rated filler around services
- Fire sealant pulled out of the opening
Fire stopping near Noke Common
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping for commercial buildings in Noke Common
It helps to set out our role at the start. The designer, fire engineer or building control decides which fire stopping is required. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance. We work on pipe penetrations, service gaps in risers and cable penetrations, and the failures we are asked to look at most are damaged fire seals in risers and voids and openings left by services added after handover. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Noke Common it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around smaller places like Noke Common, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
The 12-month guarantee covers our workmanship: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Noke Common (PO30)
- Wider area
- Isle of Wight
- Guarantee
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Service penetrations in Noke Common buildings
For England, the fire stopping of penetrations is dealt with in Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. The 2 miles around Noke Common include two care or nursing homes. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail.
Hospital estates such as Mr Rohan Sawant (St Mary’s Hospital), 0.8 miles south-east of Noke Common, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail. Older community buildings such as Church of St. John the Baptist that have been rewired or given new heating can have service gaps through walls worth checking against the specification. In a school such as Hunnyhill Primary School, fire-rated sealant goes in around service penetrations where it is specified.
Noke Common is about 2 miles north of Newport, in the Isle of Wight. Noke Common sits inside our coverage and the rest of the Isle of Wight, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 125 places across the Isle of Wight fall within our area, Noke Common among them. Portsmouth is covered too, some 12 miles away.
If you need fire stopping in PO30, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Nearby places we also cover include Parkhurst (1 mile south-east), Forest Side (1 mile south-west), Hunny Hill (1 mile south), Northwood (2 miles north) and Rew Street (2 miles north-west) for service penetrations. A short drive away, we cover Ryde (6 miles east), Cowes (3 miles north), Sandown (8 miles south-east), Shanklin (8 miles south-east), Ventnor (10 miles south-east) and East Cowes (3 miles north-east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you give us a call on 01277 525 020 or send photos by email.
Near you in Noke Common
Recent enquiries here include premises near The Stag pub, Medina College and Seaclose Park. Other landmarks nearby include Carisbrooke Castle (2.3 miles south) and St Mary's Hospital (0.8 miles south-east). Green spaces nearby include Briddlesford Nature Reserve and Mill Hill.
Your questions answered
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Noke Common?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Do you cover business parks and estates near Noke Common, such as Wakes Retail Park?
Yes. We cover Noke Common and the area around it, including industrial estates, business parks and retail parks such as Wakes Retail Park. A few photographs and the unit address let us price the work.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we’ll arrange a visit.
What happens if old sealant might contain asbestos?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
Can one quote cover more than one building?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
Different surfaces, different methods
Plastic pipes
In a fire, plastic pipework melts away and leaves an opening. Some intumescent sealants are tested on smaller plastic pipes, though larger ones normally call for a collar or wrap. We check the pipe material and diameter against the detail before we start.
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. Bundle size, cable type and the space between cables all matter and we work within those limits.
Nearby places to Noke Common
Other services in Noke Common
From enquiry to sign-off
Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before we move to the next. If others near Noke Common need work, visits can be combined, which keeps travel down. You’ll have a fixed quote before work starts.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Let building users know which areas are affected
- Share your working hours and any access restrictions
- Agree which areas must stay open
Getting a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.
Advice
Aftercare for building managers
Keep the joints in good shape with a few simple steps:
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Keep product data and details in the fire safety file
- Ask the designer to confirm details early on refits
- Keep general-purpose fillers away from compartment walls
During planned inspections, look at seals in risers, cupboards and voids. Watch for cracked sealant, new services with no seal and openings that have grown.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
When to bring in a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
What sealant work can’t fix
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Construction that lacks the fire resistance the seal relies on
- Plastic pipes whose detail calls for a collar or wrap
Not sure which it is? You can phone 01277 525 020 or send details through our quote form and we will tell you honestly.
Surfaces we seal
- Linear gaps at wall heads
- Cable penetrations
- Pipe penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
Owners, agents and contractors
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
CHAS accredited and a Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.