Fire-rated sealing and fire stopping in Nigg, Highland
Fire-rated and intumescent sealing of service penetrations and linear gaps in Nigg and across Highland. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Openings left by services added after handover
- Old intumescent sealant that has split away
- Hidden openings found during inspections
Fire stopping near Nigg
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping for commercial buildings in Nigg
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Other openings need collars, wraps, batts, pillows or boards. We use sealant where it is the specified product, and we tell you when a detail calls for something else. We work on small duct penetrations where the tested detail allows, cable penetrations and service gaps in risers, and the failures we are asked to look at most are fire sealant pulled out of the opening and fire stopping installed outside its tested range. A single leaking joint is often how a building in Nigg first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Refurbishments in small hotels, schools and care homes around places like Nigg can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Location
- Nigg (IV19)
- Region
- Highland
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
FAQs: Nigg
Is Nigg too small for you to travel to?
Not at all: smaller places are covered as well as towns. Every Scottish council area is within our area. Where we can, we group nearby jobs to make the most of each trip.
How do the Scottish rules apply to fire-rated sealing in Nigg?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
Can you work while the building is occupied?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
What do you charge?
That depends on the job: quantities, access, the product and any phasing. Call for a fixed quote and we will price it properly.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
Quoting for work in Nigg
The price varies from site to site. Expect it to depend on:
- Backing rod, priming and other preparation
- Location, for remote and island sites
- The product specified
- Induction, permit and paperwork requirements
Pricing service penetrations depends on quantities, condition and access, plus any specification you’re working to. Call for a quote.
What we need to price the job
It doesn’t need to be a full survey. These details are enough to start:
- Your programme or deadline
- How the joints are reached, and at what height
- Where the site is, with the postcode
- The asbestos register, for older buildings
To get a fixed quote, give us a call on 01277 525 020 or email the details over. You can also send details through our quote form.
How the job changes by surface
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers, and we work within it.
Risers and ceiling voids
Openings above suspended ceilings are easy to miss. We follow your schedule area by area, and note anything we find that isn’t on it.
Maintenance after handover
Your facilities or cleaning team can help the joints last. Share these points with them:
- Include service cupboards in routine inspections
- Put resealing into every M&E and fit-out package
- Leave fire sealant to cure fully before covering it
- Treat an open penetration as a priority repair
Store the specified product details somewhere the next contractor can find them. Anyone resealing later needs to know which product and detail were used.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. That way the opening is sealed while the trade and access are still there, not months later.
Owners, agents and contractors
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
For main contractors, we work as the sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
How a job runs
Tell us your site hours and access windows and we will plan around them. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. Travel to smaller Scottish places like Nigg is planned so the job is finished in one visit where possible, so photos, sizes and a full list matter. Outside work also needs a suitable weather window.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Point out any areas we must not close
- Point out parking and an unloading spot
- Tell us what induction or permit system the site runs
Request a quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, call the office on 01277 525 020 or email a schedule or drawings.
Read more
Fire stopping around Nigg: how the place shapes the job
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
Older community buildings such as Church of Scotland Parish Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Nigg is about 11 miles north-west of Nairn, in Highland. We cover commercial sites throughout Nigg, whether it’s a single job or part of a planned programme. Our Highland coverage takes in 256 places, large and small. We also cover Aberdeen, some 80 miles away.
Anyone looking for fire stopping in IV19 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Close to Nigg, our area also takes in Pitcalnie (1 mile north-east), Arabella (3 miles north), Cromarty (3 miles south), Milton (3 miles north-west) and Kilmuir (3 miles west). Nearby towns on our patch include Nairn (11 miles south-east), Tain (7 miles north), Alness (9 miles west), Dornoch (11 miles north), Invergordon (6 miles west) and Fortrose (11 miles south-west). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Near you in Nigg
The nearest railway station is Fearn station, roughly 4.1 miles north of the centre. Other landmarks nearby include Hugh Miller Museum & Birthplace Cottage (2.8 miles south) and County Community Hospital (5.4 miles west).
What else we do in Nigg
What we are called out for in Nigg
A common fault is a product that was never fire-rated in the first place: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position, so it has to come out.
Common reasons buildings call us in:
- Unsealed openings around new pipes and cables
- Fire seals cut back for extra cables and never reinstated
- Improvised or mixed-product fire seals
- Head-of-wall gaps with no fire seal
Hospital estates such as County Community Hospital (5.4 miles west of Nigg) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
What your quote should include
- Will RAMS and insurance details be available?
- How long is the guarantee, and what does it include?
- Whether primer will be used where the manufacturer specifies it
- Which product they’ll use, and why it suits the joint