Mastic Sealing in Nigg
We carry out mastic sealing for building owners, managing agents and housing associations in Nigg and the surrounding area. Send details for a fixed quote.
- Draught complaints from residents or tenants
- Repeated reactive repairs to the same buildings
- Brittle perimeter mastic across a building
Need mastic sealing in Nigg?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our mastic sealing in Nigg
We diagnose before we prescribe: what has failed, what caused it and whether new sealant will actually solve it. Old mastic is removed entirely, the faces prepared, primer used where the maker specifies it and new sealant tooled in and backing rod used wherever a joint is deep. If you are dealing with complaints coming in block by block and communal area joints that look neglected, we can help. A single leaking joint is often how a building in Nigg first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For buildings around Nigg, we group the work to keep travel and visits down. A list of addresses and photographs lets us quote for them together.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Place
- Nigg (IV19)
- Wider area
- Highland
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
From enquiry to sign-off
Site rules come first: signing in, inductions and any permit to work. Once we’re cleared to begin, we take the joints in the sequence agreed with you. For work around Nigg, we aim for one trip, so photographs, sizes and a full list matter. External joints need a dry spell as well.
- We inspect the joints, building by building, and record what has failed and why.
- You get a fixed quote, priced per building where that helps your budgeting.
- The programme is fixed with you, including dates you can pass on to residents or tenants.
- Failed mastic is removed and the faces taken back to sound, dry material.
- Backing rod and primer go in as the joint requires, then the new bead is placed and tooled.
- Each building is checked on completion and the work carries our 12-month guarantee.
Getting the site ready
- Let building users know which areas are affected
- Share your working hours and any access restrictions
- Point out any areas we must not close
Getting a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Related advice
Keeping the joints sound
Cleaning and maintenance staff play a part too. Share these points with them:
- Make it easy for occupiers to report draughts
- Share your contractor requirements early
- Share the asbestos register when you send details
- Log resealing dates block by block
Where a paintable product was specified, it can be painted after curing. Non-paintable silicone shouldn’t be painted over.
The longer failed joints are left, the more likely the substrate edges break up. Then the edges may need repairing first and the job grows.
Questions about Nigg
Does the sea air around Nigg change the choice of sealant?
It can. Coastal exposure works external joints harder than inland weather. We check the specified product suits the exposure and pay close attention to preparation.
Is Nigg too small for you to travel to?
Not at all: smaller places are covered as well as towns. We cover the whole of Scotland. Where we can, we group nearby jobs to make the most of each trip.
What about access for upper-floor joints?
Access is discussed and agreed before the quote is fixed. Tell us the building height and any access already in place, and we will tell you how we’d approach it.
What guarantee do you give on resealing?
There is a 12-month guarantee on our workmanship and we hold public liability insurance.
What’s the quickest route to a quote?
You can use the quote form on this site; alternatively, ring 01277 525 020 or email us. Photos, drawings or a joint schedule help us quote quickly.
How long does a job like this take?
That varies with the scale of the job, but the work typically takes a day or two for a single block, longer for an estate programme. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Can you reseal a whole block or estate?
We can. Each building is inspected, quoted and scheduled in turn, and the programme can start with the worst.
When something else is needed
Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:
- Frames that are rotten, warped or broken
- Asbestos-containing sealant, which we don’t remove
- Substrate edges that need repairing first
If in doubt, call 01277 525 020 or email the details over and we’ll say what we think before you book.
Where we work in Nigg
- Balcony and threshold joints
- External wall and movement joints
- Shopfronts below residential blocks
- Communal entrances and stairwells
- Communal kitchens and washrooms
- Window and door perimeters on blocks
Why deal with it now?
Replacing mastic before water gets in is a planned job. Once water has tracked in, the repair list grows and occupiers notice. Renewing every failing joint on one visit is the sensible approach for a place like Nigg. Send photos and we will quote for everything together.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Why choose Mastic Doctor in Nigg
- Products installed to the manufacturer’s instructions
- Fully insured, including public liability cover
- Colour agreed before work starts
- Constructionline member for supplier checks
Read our cost guide or our accreditations.
When to bring in a specialist
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
How the quote is worked out
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- Induction, permit and paperwork requirements
- Backing rod, priming and other preparation
- The total length or number of joints
- Whether the work must be split into stages
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
Before you send an enquiry
For an accurate fixed quote, we need to understand the site. Useful things to include:
- When you need the work done
- What the building is and how it’s used
- Rough lengths or quantities, or drawings if you have them
- Specification clauses that apply
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, phone 01277 525 020 or use the quote form.
Other services in Nigg
Looking after buildings in and around Nigg
The sea is no more than about 1 mile from Nigg. For owners and agents with buildings near the sea, exposed elevations are where frame mastic fails first, and they deserve more regular inspection. Nigg is on Scotland’s wetter western side. Frame mastic on weather-facing sides tends to fail first. Outside mastic goes on in dry spells, with some flexibility in the programme.
If you are responsible for a building such as Church of Scotland Parish Church, frame and door mastic needs the same attention as any other property. For agents with blocks near Fearn station, 4.1 miles north of Nigg, a block-wide mastic programme deals with frames, balconies and entrances in one go.
Nigg is about 11 miles north-west of Nairn, in Highland. Nigg sits inside our coverage and the rest of Highland, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 256 places across Highland fall within our area, including Nigg. Aberdeen is covered too, some 80 miles away.
Business premises anywhere in IV19 are within our area. Just outside Nigg, we also work in Pitcalnie (1 mile north-east), Arabella (3 miles north), Cromarty (3 miles south), Milton (3 miles north-west) and Kilmuir (3 miles west). Further afield, our area takes in Nairn (11 miles south-east), Tain (7 miles north), Alness (9 miles west), Dornoch (11 miles north), Invergordon (6 miles west) and Fortrose (11 miles south-west). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you speak to us on 01277 525 020 or email the details over.
What’s near Nigg
For rail, the closest station is Fearn station, roughly 4.1 miles north of the centre. A little further out are Hugh Miller Museum & Birthplace Cottage (2.8 miles south) and County Community Hospital (5.4 miles west).