Fire stopping in Lauriston
Fire stopping for Lauriston, from a contractor working since 2005. Fully insured and CHAS accredited.
- Penetration schedules that need working through
- Fire sealant pulled out of the opening
- Hidden openings found during inspections
Fire stopping near Lauriston
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle fire stopping in Lauriston
Facilities managers in Lauriston often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. We work on linear gaps at wall heads, joints between fire-resisting walls and floors and pipe penetrations, and the usual reasons a site gets in touch are improvised or mixed-product fire seals and service penetrations left open after M&E works. One point of contact handles commercial sealant work in Lauriston from the first photographs to the final walk-round, whether it’s one building or several.
Tenement blocks and converted stone buildings in Scottish cities often hide old service routes through walls and floors. Before sealing, we confirm the wall or floor and the services passing through, so the product matches the detail.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Place
- Lauriston (EH3, EH1, EH8)
- Region
- Edinburgh
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Aftercare for building managers
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. Our advice:
- Get seals inspected before ceilings and boxing close
- Ask which product is in place before decorating
- Treat an open penetration as a priority repair
- Ask the designer to confirm details early on refits
Don’t patch a fire-rated seal with anything outside its tested detail. Repairs need the same product and detail as the original unless the designer specifies otherwise.
Looking at service areas on a regular cycle pays off. Catching a damaged seal early keeps the fix small.
Our process
In a busy building, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then handed back before we move to the next. In a Scottish city, kerbside space and loading need planning, especially near the centre. Shared closes, stairs and the property factor may need to be part of the plan.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Before we start on site
- Agree which areas must stay open
- Point out parking and an unloading spot
- Let building users know which areas are affected
Ask for a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to give us a call on 01277 525 020 or email a schedule or drawings with what you know.
Related advice
When it isn’t the sealant
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be any of the following:
- Walls or floors that aren’t fire-resisting to begin with
- Writing the fire-stopping specification
- Large openings beyond what any sealant detail covers
If you are not sure, just call 01277 525 020 or send details through our quote form and we will give you a straight answer.
Where we work in Lauriston
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Cable penetrations
What the job involves on each surface
Cables and cable bundles
New data and power cables are the most common breach we see. Openings around new cables are resealed to the detail, and any bundle too large for sealant alone is flagged.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access is often tight, so we agree it with you in advance, including keys, permits and any isolations.
Signs you need fire stopping in Lauriston
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Deflection and building movement can open these gaps, and the wrong product can split as a result. The tested detail for a linear joint states the width and movement it covers.
Things that typically lead to an enquiry:
- Unsealed joints where partitions meet the slab
- Builders’ foam or ordinary silicone in compartment walls
- Service penetrations left open after M&E works
- Improvised or mixed-product fire seals
Wherever services are added at a hospital such as Astley Ainslie Hospital, 1.1 miles south of Lauriston, the compartment line has to be made good with the specified product.
Before you book anyone
- How long is the guarantee, and what does it include?
- How the existing material will be dealt with
- Whether their applicators hold CSCS cards
- The named product and why it was chosen
What affects the price in Lauriston
What shapes the price:
- The size and state of each joint
- Site requirements such as inductions and permits
- How much existing material needs removing
- Which sealant the job calls for
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote.
Details that help us quote
However big the job, the same details help:
- Clear photos of the problem areas
- How the joints are reached, and at what height
- Where the site is, with the postcode
- Your programme or deadline
Need a figure for a tender or a budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, give us a call on 01277 525 020 or email drawings and photos.
Common questions from Lauriston clients
Do you seal service penetrations in hotels around Lauriston?
Yes, where the specification calls for fire-rated sealant. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we’ll tell you if the detail calls for a collar, wrap or batt instead.
How do Scotland’s building standards affect fire-rated sealant in Lauriston?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we will send them with the quote.
Can you work while the building is occupied?
Typically, yes. Phased work can be planned so areas stay in use.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it.
Do you have public liability insurance?
Yes. We are fully insured, including public liability cover.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
Compartments and services around Lauriston
The 2 miles around Lauriston include six care or nursing homes. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal. A 2-mile radius around Lauriston takes in plenty of hotels. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
For a site team at a college like Royal College of General Practitioners Edinburgh, which lies north of Lauriston, fire-rated sealing is best scheduled after the summer works. In a retail centre such as Waverley Mall (0.6 miles north of Lauriston), any fire-resisting wall between units that is crossed by new services needs sealing to the tested detail.
Lauriston is about 1 mile east of Edinburgh, in Edinburgh. Anywhere in EH3, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Our Edinburgh coverage takes in 174 places, from busy centres to rural villages.
Anyone looking for fire stopping in EH3, EH1 and EH8 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Lothian Road, Forrest Road and Lister Square are within our area for service penetrations. Being close to the A700, Lauriston is straightforward for us to reach. We also cover Old Town (1 mile north-east), Marchmont (1 mile south), Buccleuch (1 mile east), Sciennes (1 mile south-east) and Holyrood (1 mile north-east) for service penetrations. A short drive away, we cover Leith (3 miles north-east), Queensferry (8 miles west), South Portobello (3 miles east), Southhouse (3 miles south-east), Gilmerton (4 miles south-east) and Muirhouse (3 miles north-west).
Near you in Lauriston
In Lauriston, that means premises near Tollcross Primary School, St Cuthbert's Church and James Gillespie's High School and the streets around them. You will also find The Meadows (under half a mile south), The Beehive Inn (less than half a mile north) and National Museums Scotland Library (less than half a mile north-east). Lauriston’s nearest station is Edinburgh Waverley station, about 0.5 miles north-east of the centre. Nearby you’ll also find Edinburgh Dental Institute (less than half a mile south) and Waverley Mall (0.6 miles north). For a walk, there’s The New Leaf Co-op and Salisbury Crags.