Fire-rated sealing and fire stopping in Kames, Argyll and Bute
Fire-rated and intumescent sealing of service penetrations and linear gaps in Kames. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Fire-stopping items raised at inspection or handover
- Damaged fire seals in risers and voids
- Hidden openings found during inspections
Fire stopping in Kames
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
From enquiry to sign-off
Site rules come first: signing in, inductions and any permit to work. Once we are cleared to begin, we take the joints in the sequence agreed with you, and each area is checked before we leave it. Jobs near Kames are often grouped with others in the same area. Let us know if your dates have any give.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Arrange parking or a loading space
- Warn occupants and staff about the work
- Share the asbestos register for older buildings
Get a fixed quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.
Related advice
How we handle fire stopping in Kames
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in, and we say so if it doesn’t fit. If you are dealing with fire sealant pulled out of the opening and openings left by services added after handover, we can put it right, whatever the surface. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Kames is the same: the right product in a properly prepared joint.
Travel to smaller places like Kames is planned so every penetration is sealed on one trip. Photos of the gaps, the services and the wall or floor type help us bring the right products.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Kames (PA21)
- Wider area
- Argyll and Bute
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Building owners, agents and FMs in Kames
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. One quote can cover more than one site, which keeps the paperwork simple.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Kames can form part of a wider programme across Argyll and Bute.
Aftercare for building managers
A few simple habits keep the new joints working:
- Arrange inspection before areas are covered up
- Settle who seals which penetrations at the start of a project
- Flag new cables with no seal around them
- Don’t let anyone top up a fire seal with the wrong product
Store the specified product details somewhere the next contractor can find them. It makes later repairs much easier to match.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
Nearby places to Kames
Other services in Kames
Why it’s worth doing now in Kames
The longer openings stay, the more there tend to be: every new cable or pipe adds another. A schedule that is dealt with regularly stays manageable, rather than turning into a full building survey and reseal. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Resealing early avoids that.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
What you get with us
- CHAS accredited
- Products installed to the manufacturer’s instructions
- A Constructionline member, so easy to vet
- 12-month guarantee on workmanship
Take a look at our cost guide and our accreditations.
Kames: questions and answers
Is Kames too small for you to travel to?
Not at all. Kames is within our area. We work across every Scottish council area. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
Which Scottish guidance covers penetration seals in Kames?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. Design sits with the designer and the verifier; installation to the tested detail is our part.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
Can the sealant be colour-matched?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We’ll confirm the colours available for the specified product.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.
What site paperwork can you supply?
Requirements differ from site to site, so tell us what you need and we’ll confirm it when we quote.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Where services cross fire walls in Kames
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
For buildings in and around Kames, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail. Hotels like Tighnabruaich Hotel, 1 mile north-east of Kames, are refurbished in phases, and each phase can open up compartment walls.
Kames is about 19 miles west of Greenock, in Argyll and Bute. Businesses, contractors and managing agents in Kames use us for work on service penetrations, as part of our coverage of Argyll and Bute. Our Argyll and Bute coverage takes in 124 places, from busy centres to rural villages. We also cover Glasgow, some 38 miles away.
We cover the PA21 postcode districts for service penetrations. Nearby places we also cover include Tighnabruaich (1 mile north), An Tairbeart (7 miles west), Port Bannatyne (7 miles east), Ardbeg (8 miles east) and Rothesay (8 miles south-east). A short drive away, we cover Dunoon (13 miles east), Ceann Loch Gilb (12 miles north-west), Lochgilphead (13 miles north-west), Ardrishaig (11 miles north-west), Sandbank (13 miles north-east) and Innellan (11 miles east). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Around Kames
Green spaces nearby include Cnoc Dubh and Asgog Loch.
Site staff or a sealant specialist?
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
When it isn’t the sealant
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Approving the work on behalf of building control
- Plastic pipes whose detail calls for a collar or wrap
- Walls or floors that aren’t fire-resisting to begin with
If in doubt, call 01277 525 020 or send details through our quote form and we will say what we think.
Where we work in Kames
- Linear gaps at wall heads
- Pipe penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Cable penetrations
- Small duct penetrations where the tested detail allows