Fire-rated sealing and fire stopping in Ardrishaig, Argyll and Bute
Need fire stopping in Ardrishaig? It’s simple: send details, get a quote, we seal, guaranteed.
- Snag lists that include open service penetrations
- Service penetrations left open after M&E works
- Fire-rated sealant that has cracked or shrunk back
Fire stopping for businesses in Ardrishaig
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Where services cross fire walls in Ardrishaig
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with products tested for that end use. We install what’s specified, to the product’s tested detail. The area within 2 miles of Ardrishaig holds a number of hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail.
Large healthcare estates like The Argyll and Bute Hospital (to the north-east of Ardrishaig) change their services often, so penetration seals are worth checking after M&E work. In a hotel such as Argyll Arms Hotel, under half a mile east of Ardrishaig, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product. Holiday works at schools like Lochgilphead High School often leave service openings to seal before pupils return.
Ardrishaig is about 27 miles west of Greenock, in Argyll and Bute. Looking for fire stopping in Ardrishaig? We can help. We work across 124 places in Argyll and Bute. Sites around Glasgow have their own page, about 47 miles away.
Anyone looking for fire stopping in PA30 and PA31 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on East Bank Road, Hillview Terrace and Chalmers Street are within our area for service penetrations. We also cover Ceann Loch Gilb (2 miles north-east), Lochgilphead (2 miles north), Cairnbaan (3 miles north-west), Bridgend (5 miles north) and Kilmichael Glassary (5 miles north) for service penetrations. Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
What’s near Ardrishaig
A little further out are Mid Argyll Community Hospital (2 miles north-east). Open spaces near Ardrishaig include Cam Loch.
How we handle fire stopping in Ardrishaig
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, phone 01277 525 020 or email the details over with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. If you are dealing with snag lists that include open service penetrations and openings left by services added after handover, we can help. One point of contact handles commercial sealant work in Ardrishaig from the first photos to the final walk-round, whether it’s one building or several.
For a building near Ardrishaig, we plan fire-rated sealing so it’s finished in one visit where possible. Send the specification and photos of the openings, with sizes if you have them.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.
- Place
- Ardrishaig (PA30, PA31)
- Wider area
- Argyll and Bute
- Guarantee
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Places near Ardrishaig
Also in Ardrishaig
Maintenance after handover
Problems stay small when the joints are checked regularly. In particular:
- Record which product was used where
- Include service cupboards in routine inspections
- Ask which product is in place before decorating
- Flag new cables with no seal around them
New services after handover are a common way fire stopping gets breached. Building it into each contractor’s sign-off keeps the walls intact.
Write fire stopping into the scope of any work crossing a compartment wall or floor. That way the opening is sealed while the trade and access are still there, not months later.
From enquiry to sign-off
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. Tell us who will meet us and how to get in at your building near Ardrishaig. We will confirm the plan with the fixed quote.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Make sure the joints can be reached
- Have the specification and drawings to hand
- Let us know about inductions and permits
Getting a fixed quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, phone 01277 525 020 or send photos by email.
Related advice
What the job involves on each surface
Metal pipes
Heat travels along metal pipework, and the tested detail may ask for insulation beyond the wall. We follow whatever the detail requires and flag anything we can’t match.
Drylining partitions
Plasterboard partitions are tested as a specific construction. The sealant detail has to be tested in that wall type, with the stated board layers.
Common questions from Ardrishaig clients
Is a hospital such as The Argyll and Bute Hospital somewhere you can work?
Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Is Kilmory Industrial Estate, near Ardrishaig, within your area?
Yes, sites like Kilmory Industrial Estate are within our area, along with the rest of Ardrishaig. A few photographs and the unit address let us price the work.
Is sealant suitable for all service openings?
No. Each fire-rated sealant is tested for particular services, gap sizes and substrates. If an opening falls outside, it needs another solution, as set out by the designer.
Can one quote cover more than one building?
Yes. Several buildings can share a single quote, with one point of contact across South East England, Greater London and Scotland.
Do you offer coloured sealant?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We’ll confirm the colours available for the specified product.
Do the same rules apply to fire stopping in Scotland?
Building standards in Scotland are separate from England’s, and England uses Approved Document B. Wherever the site is, our work follows the specification and the tested detail.
Do you certify or sign off fire stopping?
No. We don’t certify or sign off fire stopping, and we hold no third-party fire-stopping installer certificate. We work to the specification and the manufacturer’s installation guidance.
Why act early in Ardrishaig
Open penetrations multiply: every new cable or pipe adds another. Keeping on top of it after each round of works keeps the job small, rather than turning into a full building survey and reseal. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Ardrishaig before they leak.
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
What you get with us
- CHAS accredited
- Public liability insurance in place
- Sealing commercial buildings since 2005
- Clear, fixed quotes
See what affects the cost and our accreditations.
What we can’t put right
Being straight saves everyone time. Fresh joints won’t solve:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Openings that need collars, wraps, batts or boards rather than sealant
- Approving the work on behalf of building control
If you are not sure, just phone 01277 525 020 or email drawings and photos and we will give you a straight answer before you book.
Joints and surfaces we work on
- Service gaps in risers
- Pipe penetrations
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Cable penetrations
Should maintenance staff do it?
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.