Fire-rated sealing and fire stopping in Inkpen Common, West Berkshire
Fire-rated and intumescent sealing of service penetrations and linear gaps in Inkpen Common. CHAS accredited and fully insured, with a 12-month guarantee.
- Unsealed penetrations discovered above suspended ceilings
- Open linear gaps along the top of fire-resisting walls
- Service penetrations left open after M&E works
Fire stopping near Inkpen Common
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping for commercial buildings in Inkpen Common
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We don’t hold a third-party fire-stopping installer certificate, and we won’t pretend otherwise. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. If you’re dealing with non-fire-rated filler around services and fire-stopping items raised at inspection or handover, we can help, on small duct penetrations where the tested detail allows, cable penetrations and linear gaps at wall heads alike. Whoever orders the work in Inkpen Common, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
For a smaller site near Inkpen Common, we plan to do all the penetrations in one go, so send the specification and photographs first. Design and sign-off belong to the designer or building control; we install what’s specified.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Inkpen Common (RG17, RG20)
- Region
- West Berkshire
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What the job involves on each surface
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point so we know it sits within the tested range.
Metal pipes
Heat travels along metal pipework, and the tested detail may ask for insulation beyond the wall. If the detail needs something beyond sealant, we tell you.
Penetration seals near Inkpen Common
Inkpen Common lies roughly 59 miles out from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls, and the gaps need sealing with the specified product. For England, the fire stopping of penetrations is dealt with in Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
Schools such as Inkpen Primary School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Inkpen Common is about 6 miles west of Newbury, in West Berkshire. We cover commercial sites throughout Inkpen Common, for single jobs and planned programmes alike. Across West Berkshire, 140 places are covered, Inkpen Common among them. For work in that direction, see our Reading page, about 21 miles away.
Work on service penetrations is covered throughout RG17 and RG20, for business premises of every kind. If your site is on Heads Lane, Rooksnest Lane and The Firs or close by, we can quote for service penetrations. We also cover Hell Corner (1 mile east), Inkpen (1 mile north-west), Upper Green (1 mile south-west), Lower Green (1 mile west) and Kintbury (2 miles north). A short drive away, we cover Newbury (6 miles east), Thatcham (9 miles east), Speenhamland (6 miles east), Hungerford (4 miles north-west), Lambourn (10 miles north) and Shaw (7 miles east).
What’s near Inkpen Common
We work on buildings around Crown and Garter pub and the streets around them. The closest station to Inkpen Common is Kintbury station, roughly 2 miles north. Nearby you will also find Hamstead Marshall 3 (3.1 miles north-east). Green spaces nearby include Kintbury Newt Ponds and Inkpen Hill.
Nearby places to Inkpen Common
Other services in Inkpen Common
Diagnose, treat, sign off
Inspect, seal, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. If others near Inkpen Common need work, visits can be combined. A fixed quote is given before anything starts.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Point out parking and an unloading spot
- Make sure the joints can be reached
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Read more
After the work
Problems stay small when the joints are checked regularly. Specifically:
- Include service cupboards in routine inspections
- Flag new cables with no seal around them
- Keep product data and details in the fire safety file
- Make fire stopping part of every scope that crosses a fire-resisting wall
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
Common problems we fix in Inkpen Common
Some seals fail because the wrong product went in: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position.
Typical triggers for a call:
- Penetration schedules that need working through
- Fire sealant pulled out of the opening
- Openings left by services added after handover
- Head-of-wall gaps with no fire seal
Older community buildings such as Church of St Laurence that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Before you book anyone
- Whether primer will be used where the manufacturer specifies it
- Is the sealant right for the movement and the substrate?
- What the guarantee covers, and for how long
- How joint depth will be controlled
Quoting for work in Inkpen Common
A fixed quote reflects the actual work. It allows for:
- Which sealant the job calls for
- Joint width, depth and condition
- How much existing material needs removing
- Distance, for remote addresses
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Details that help us quote
We can often quote from photos and a few details. Please tell us:
- The asbestos register, for older buildings
- Specification clauses that apply
- A wide shot and a close-up of the area
- Approximate linear metres or a joint schedule
For a fixed quote, ring 01277 525 020 or email drawings and photos with the site address and an outline of the work. You can also send details through our quote form.
Common questions from Inkpen Common clients
Is Inkpen Common too small for you to travel to?
Not at all. Inkpen Common is within our area. Our area covers London and the South East counties. Good photos up front let us bring everything on the first visit.
Do you decide the fire-stopping details for buildings in Inkpen Common?
No, that sits with the designer, fire engineer or building control. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
How soon can the area be used again?
We’ll confirm how long the chosen product needs to cure.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we’ll schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
Do you take on small jobs?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
When to bring in a specialist
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.