Upper Green fire stopping
Looking for fire stopping in Upper Green? It’s simple: send details, get a quote, we seal, guaranteed.
- Damaged fire seals in risers and voids
- Old intumescent sealant that has split away
- Openings left by services added after handover
Fire stopping across Upper Green
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle fire stopping in Upper Green
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. Each seal follows the manufacturer’s tested detail. The enquiries we see most involve openings found when ceilings come down for a refit and fire sealant pulled out of the opening, across small duct penetrations where the tested detail allows, cable penetrations and service gaps in risers. Most enquiries from Upper Green start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
For a smaller site near Upper Green, we plan to do all the penetrations in one go, so send the specification and photographs first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Place
- Upper Green (RG17)
- Wider area
- West Berkshire
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Our process
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. If others near Upper Green need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Agree which areas must stay open
- Tell us your opening times and when work is allowed
- Tell us what induction or permit system the site runs
Getting a fixed quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Read more
Compartment walls and floors in Upper Green
Central London is about 60 miles from Upper Green. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls. In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Offices at parks like Stype Business Centre (2.9 miles west of Upper Green) are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail. For a building such as Church of St Michael, new heating or data runs are the usual reason penetrations need sealing.
Upper Green is about 7 miles west of Newbury, in West Berkshire. Across the RG17 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. We work across 140 places in West Berkshire, from busy centres to rural villages. There’s a separate page for Reading, about 22 miles away.
Postcode districts covered here: RG17. We also cover Inkpen (1 mile north), Inkpen Common (1 mile north-east), Hell Corner (1 mile north-east), Lower Green (1 mile north-west) and Kintbury (2 miles north-east) for service penetrations. A short drive away, we cover Newbury (7 miles east), Thatcham (9 miles east), Speenhamland (7 miles north-east), Hungerford (4 miles north-west), Lambourn (10 miles north) and Shaw (7 miles north-east).
Landmarks near Upper Green
Around Upper Green, our work takes us to commercial buildings near Crown and Garter pub. Upper Green’s nearest station is Kintbury station, about 2.6 miles north-east. Other landmarks nearby include Hamstead Marshall 3 (3.8 miles north-east). For a walk, there’s Kintbury Newt Ponds and Inkpen Hill.
Do you need fire stopping in Upper Green?
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Deflection and building movement can open these gaps, and a product not tested for that movement may crack. Linear joint details set a width range and movement capability, and the seal has to sit within them.
What tends to prompt an enquiry:
- Fire stopping installed outside its tested range
- Openings found when ceilings come down for a refit
- Fire seals cut back for extra cables and never reinstated
- Head-of-wall gaps with no fire seal
In a school such as Inkpen Primary School, fire-rated sealant goes in around service penetrations where it is specified.
What to look for in a quote
- Will CSCS-carded applicators be on site?
- How they’ll work around occupants
- Is the sealant right for the movement and the substrate?
- Will RAMS and insurance details be available?
Upper Green: questions and answers
Is a smaller place like Upper Green outside your area?
No. Small places get the same service as large ones. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.
What happens to BS 476 references for fire stopping in Upper Green?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
When is resealing likely to be due?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Can the sealant be colour-matched?
That depends on the product specified. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Can one quote cover more than one building?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
Can weather delay the job?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
General trades versus a specialist
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
What affects the price in Upper Green
The price varies from site to site. Expect it to depend on:
- The size and state of each joint
- The total length or number of joints
- Distance, for remote addresses
- Phasing around occupants
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
What we need to price the job
The more we know, the firmer the quote. When you get in touch, include:
- Where the site is, with the postcode
- A wide shot and a close-up of the area
- Anything awkward about access or site hours
- Rough lengths or quantities, or drawings if you have them
Send us photos, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
After the work
Once the work is signed off, these steps help:
- Check with the data sheet before painting over fire sealant
- Keep product data and details in the fire safety file
- Have penetrations checked while they can still be seen
- Settle who seals which penetrations at the start of a project
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Some fire-rated sealants accept paint and some don’t, and the data sheet says which.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
Building owners, agents and FMs in Upper Green
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first, and our applicators hold CSCS cards.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.