Expansion Joint Sealing in Inkpen Common
Looking for expansion joint sealing in Inkpen Common? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Damp inside where a wall movement joint has failed
- Sealant pulling off the joint face
- Debris jammed in movement joints
Expansion joint sealing in Inkpen Common
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
When something else is needed
Before quoting, we check that sealant is the right answer. It won’t put right:
- Concrete or masonry repairs along the arrises
- A joint that has to be widened or re-detailed before it can work
- Leaks coming from the membrane rather than the joint seal
If you’re not sure, just call 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer.
What we seal
- Cladding panel joints
- Blockwork control joints
- Precast concrete panel joints
- Brickwork movement joints
- Podiums and floor movement joints
- Car park decks and ramps
About our expansion joint sealing in Inkpen Common
Long runs of brick or block have movement joints built in. Failed sealant here lets rain into the wall and can leave the joint full of debris. The old seal comes out, backing goes in and a sealant with the right movement class is applied with primer where the maker calls for it. Most enquiries involve spalled or broken joint edges in floors and decks and debris jammed in movement joints, across blockwork control joints, podiums and floor movement joints and car park decks and ramps. A specialist sealant contractor works differently from a general builder: in Inkpen Common, that means joint design, primers and backing rod as standard.
In and around smaller places like Inkpen Common, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Inkpen Common (RG17, RG20)
- Wider area
- West Berkshire
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Where floor joints take the most wear near Inkpen Common
Inkpen Common is about 59 miles from central London. Warehousing clusters around the motorways that ring and radiate from London. Inkpen Common is in the South East, one of the UK’s drier regions. External joints still wait for dry conditions, and winter de-icing salt on car parks and ramps works into any open joint.
In and around Inkpen Common, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Inkpen Common is about 6 miles west of Newbury, in West Berkshire. We send applicators to Inkpen Common for movement joints, handled exactly as we handle every other area. Inkpen Common is one of 140 places we cover in West Berkshire for movement joints. Our Reading page has more on work in that area (21 miles or so).
Work on movement joints is covered throughout RG17 and RG20, for business premises of every kind. Streets here include Heads Lane, Rooksnest Lane and The Firs, and sites on any of them can send details for a fixed quote. Sites close to Inkpen Common are covered too, including Hell Corner (1 mile east), Inkpen (1 mile north-west), Upper Green (1 mile south-west), Lower Green (1 mile west) and Kintbury (2 miles north). Nearby towns on our patch include Newbury (6 miles east), Thatcham (9 miles east), Speenhamland (6 miles east), Hungerford (4 miles north-west), Lambourn (10 miles north) and Shaw (7 miles east).
What’s near Inkpen Common
In Inkpen Common, that means premises near Crown and Garter pub. The nearest railway station is Kintbury station, about 2 miles north of the centre. Well-known places in the area include Hamstead Marshall 3 (3.1 miles north-east). Not far away are Kintbury Newt Ponds and Inkpen Hill.
Common problems we fix in Inkpen Common
Three-sided adhesion is a common cause of early failure. Bonded on three faces, it can’t stretch evenly when the joint opens.
If one of these sounds familiar, it’s time for a closer look:
- Sealant peeling off one face of the joint
- New sealant over old, now failing
- Rain penetration at brick or block movement joints
- Water dripping through deck or ramp joints
For a school such as Inkpen Primary School, playground and building joints can be done in the holidays.
What to look for in a quote
- The terms of the workmanship guarantee
- Whether old or failed sealant will be cut out, not overlaid
- Their plan for phasing and protecting the area
- How joint depth will be controlled
Also near Inkpen Common
Other services in Inkpen Common
Owners, agents and contractors
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
What the job involves on each surface
Car park decks and ramps
Failed deck joints often show as leaks on the level below. We strip the old seal, prepare the edges and seal again flagging broken edges along the way.
Internal floor movement joints
Floor joints include saw-cut joints and construction joints. A semi-rigid filler is common in trafficked industrial floors.
Site staff or a sealant specialist?
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Your questions answered
Is a smaller place like Inkpen Common outside your area?
No. Places such as Inkpen Common are covered as much as the big towns. London and every South East county are within our area. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Which documents can you supply for work in Inkpen Common?
We will confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Can you seal joints in cold or wet weather?
Sealing onto a damp surface leads to adhesion failure so we’d rather rearrange than seal in the rain. We agree a revised date with you.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Can you seal car park deck joints?
Yes. Deck and ramp joints are resealed with a trafficable sealant chosen for the movement, and phased work can be planned so parts of the car park stay in use.
Why do our movement joints keep failing?
The way it has failed normally tells us why: a split through the middle points to over-stretching, while peeling from one face points to preparation or primer. Broken edges are a third possibility.
What’s the quickest route to a quote?
There are four steps: send details, get a quote, we seal, guaranteed. The first step only needs photographs and a postcode.
How a job runs
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then handed back before the next one starts. Rural sites near Inkpen Common may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.
- We assess the joints on site or from photographs, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Getting the site ready
- Confirm the product named in the specification
- Agree which areas must stay open
- Tell staff and tenants when we will be in
Get a fixed quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.