Fire Stopping in Inkpen
Need fire stopping in Inkpen? It’s simple: send details, get a quote, we seal, guaranteed.
- Unsealed penetrations discovered above suspended ceilings
- Openings left by services added after handover
- Snag lists that include open service penetrations
Fire stopping for Inkpen sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Inkpen
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, speak to us on 01277 525 020 or send photos by email with the schedule or marked-up drawings and the specified product data. Tell us what records you need and we will confirm with the quote. If you’re dealing with builders’ foam or ordinary silicone in compartment walls and penetration schedules that need working through, we can help. Whoever orders the work in Inkpen, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Around smaller places like Inkpen, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Inkpen (RG17)
- Wider area
- West Berkshire
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Doing it in-house
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Questions we’re asked in Inkpen
What happens to BS 476 references for fire stopping in Inkpen?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Do you cover business parks and estates near Inkpen, such as Stype Business Centre?
Yes. We cover Inkpen and the area around it, including industrial estates, business parks and retail parks such as Stype Business Centre. To start, just phone 01277 525 020 or use the quote form with the unit, the joints involved and your access times.
Who decides which product is used?
A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How much does the work cost?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Can weather delay the job?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Our process
Tell us your site hours and access windows and we will plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Rural sites near Inkpen may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Share your working hours and any access restrictions
- Point out any areas we must not close
- Tell us what induction or permit system the site runs
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.
Related advice
Commercial clients in Inkpen
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
Fire stopping around Inkpen: how the place shapes the job
At about 60 miles from central London, Inkpen is within reach of the capital. Office refits around the commuter belt bring new cabling through fire-resisting walls, and the gaps need sealing with the specified product. For England, the fire stopping of penetrations is dealt with in Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
For a building such as Church of St Michael, new heating or data runs are the usual reason penetrations need sealing. In a school such as Inkpen Primary School, fire-rated sealant goes in around service penetrations where it is specified. Offices at parks like Stype Business Centre, 3 miles to the west of Inkpen, are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail.
Inkpen is about 6 miles west of Newbury, in West Berkshire. Looking for fire stopping in Inkpen? We can help. 140 places across West Berkshire fall within our area, including Inkpen. We also cover Reading, around 22 miles from Inkpen.
If you need fire stopping in RG17, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Buildings on Folly Road, Post Office Road and Robins Hill are within our area. Just outside Inkpen, we also work in Inkpen Common (1 mile south-east), Upper Green (1 mile south), Hell Corner (1 mile east), Lower Green (1 mile west) and Kintbury (2 miles north-east). Nearby towns on our patch include Newbury (6 miles east), Thatcham (9 miles east), Speenhamland (6 miles east), Hungerford (3 miles north-west), Lambourn (9 miles north) and Shaw (7 miles east).
Landmarks near Inkpen
Recent enquiries here include premises near Crown and Garter pub. The closest station to Inkpen is Kintbury station, about 1.9 miles north-east. Nearby you’ll also find Hamstead Marshall 3 (3.3 miles north-east). For a walk, there’s Kintbury Newt Ponds and Inkpen Hill.
Looking after the joints
Once the work is signed off, a little attention goes a long way:
- Put resealing into every M&E and fit-out package
- Look above ceilings when tiles are lifted for other jobs
- Treat an open penetration as a priority repair
- Settle who seals which penetrations at the start of a project
Once the seals are in, tell other trades they exist and must not be disturbed. If a seal has to be opened for a new service, it should be reinstated to the same detail.
Specify fire stopping early on refits, not as an afterthought. Details can then be picked to suit the actual pipes, cables and ducts, and installation follows the programme.
Different surfaces, different methods
Small ducts
We seal around ducts only within what the tested detail covers. The ductwork, its supports and any dampers are for the ductwork contractor.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access is often tight, so we agree it with you in advance.
What else we do in Inkpen
Why deal with it now?
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail, and doing it once, properly, is cheaper. One visit to deal with every failing joint makes more sense than several trips to a place like Inkpen. Photos of every joint help us quote for the whole job.
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we’ll explain how it’s made up.
Why us?
- Fully insured
- One phone line for London, the South East and Scotland
- Over 20 years of commercial sealing
- CHAS accredited contractor