Fire Stopping in Hamister
Need fire stopping in Hamister? It’s simple: send details, get a quote, we seal, guaranteed.
- Improvised or mixed-product fire seals
- Open linear gaps along the top of fire-resisting walls
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping in Hamister
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
On site: what to expect
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself typically takes a single visit for a short list of penetrations, or a phased programme for a whole building, and our waste is bagged and taken away as we go. For a building near Hamister, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Clear stock, furniture or equipment away from the joints
- Tell us what induction or permit system the site runs
Request a quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, ring 01277 525 020 or use the quote form.
Read more
Fire stopping in Hamister, done properly
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. So our job is to reproduce that arrangement faithfully. Site teams most often ask us about snag lists that include open service penetrations and non-fire-rated filler around services, on linear gaps at wall heads, small duct penetrations where the tested detail allows and service gaps in risers. One point of contact handles commercial sealant work in Hamister from the first photos to the final walk-round, for single jobs and planned programmes alike.
For a building near Hamister, we plan fire-rated sealing so it’s finished in one visit where possible. Send the specification and photos of the openings, with sizes if you have them.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Where
- Hamister (ZE2)
- Wider area
- Shetland Islands
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What affects the price in Hamister
What shapes the price:
- Location, for remote and island sites
- Which sealant the job calls for
- How much there is to seal
- How accessible the joints are
A quote for service penetrations depends on how many there are, their condition and the access. Ask us for a fixed quote.
Sending details for a quote
For an accurate fixed quote, we need to understand the site. Useful things to include:
- Any dates the work must fit around
- A wide shot and a close-up of the area
- The postcode of the building
- Any specification or named product
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Hamister: questions and answers
Will you design a fire-stopping scheme for our building in Hamister?
No, that sits with the designer, fire engineer or building control. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
Which Scottish guidance covers penetration seals in Hamister?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
Will you come and look before quoting?
That depends on the size and complexity of the job. Simple work can often be priced from photographs, while larger or less clear jobs get a site visit first.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. Our office runs Monday to Friday, 8am until 5pm.
Do you work in Hamister?
Yes. We cover Hamister and the rest of the Shetland Islands. To discuss a job, give us a call on 01277 525 020 or email drawings and photos.
Can you handle several sites?
Yes. Multi-site work and planned programmes are a core part of the service, planned site by site to suit how each building is used.
Signs you need fire stopping in Hamister
Openings in fire-resisting walls typically appear when services are added or changed. New cabling, rerouted pipework or a data route drilled through a riser leaves an opening that nobody returns to. Across several fit-outs, the openings add up.
Things that usually lead to an enquiry:
- Seals disturbed by maintenance and left open
- Open linear gaps along the top of fire-resisting walls
- Fire-rated sealant that has cracked or shrunk back
- Fire-stopping items raised at inspection or handover
Around Hamister, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
What to look for in a quote
- Will RAMS and insurance details be available?
- Their approach to joint depth and backing
- Their pre-qualification and accreditations
- How the joint faces will be prepared and primed
Commercial clients in Hamister
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Also in Hamister
Looking after the joints
A few simple habits keep the new joints working:
- Treat an open penetration as a priority repair
- Don’t let anyone top up a fire seal with the wrong product
- Check risers and ceiling voids after each round of works
- Make fire stopping part of every scope that crosses a fire-resisting wall
New services after handover are a common way fire stopping gets breached. A short check at the end of each job saves a long hunt later.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
Compartments and services around Hamister
Island jobs, Hamister among them, are planned around the ferry and the forecast. We need the specification and a count of penetrations before we sail. Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, and products should be tested for their end use. We install what’s specified, to the product’s tested detail.
For any site around Hamister, we work to the specification and the manufacturer’s installation guidance, leaving design and sign-off with the designer.
Hamister is in the Shetland Islands. Hamister sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 63 places in the Shetland Islands.
Anyone looking for fire stopping in ZE2 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Norrendal and North Park are within our area for service penetrations. Sites close to Hamister are covered too, including Symbister (1 mile south), Tripwell (1 mile north-east), Sandwick (1 mile south), Clate (1 mile south) and Brough (1 mile north-east). Bigger towns within reach include Lerwick (15 miles south), Sound (15 miles south) and Brae (12 miles west). For island and remote sites, travel and materials need planning ahead, so include the location in your enquiry.
What’s near Hamister
Not far away are Setter Hill and Little Water.
Honest limits
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Issuing fire ratings or certificates for seals
- Construction that lacks the fire resistance the seal relies on
- Writing the fire-stopping specification
Not sure which it is? You can call 01277 525 020 or email a schedule or drawings and we will tell you honestly before you book.
Surfaces we seal
- Service gaps in risers
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Cable penetrations