Fire-rated sealing and fire stopping in Greenfoot, North Lanarkshire
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Greenfoot and the surrounding area. Send photos or drawings for a fixed quote.
- Fire stopping installed outside its tested range
- Fire-stopping items raised at inspection or handover
- Fire sealant pulled out of the opening
Fire stopping for businesses in Greenfoot
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Owners, agents and contractors
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
How we handle fire stopping in Greenfoot
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. Each seal follows the manufacturer’s tested detail, not a rule of thumb. We work on joints between fire-resisting walls and floors, small duct penetrations where the tested detail allows and cable penetrations, and the usual reasons a site gets in touch are builders’ foam or ordinary silicone in compartment walls and unsealed penetrations discovered above suspended ceilings. Facilities teams, main contractors and managing agents in Greenfoot tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Travel to smaller places like Greenfoot is planned so every penetration is sealed on one trip. Photos of the gaps, the services and the wall or floor type help us bring the right products.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application, and if something we did falls short, we return to it.
- Place
- Greenfoot (ML5)
- Wider area
- North Lanarkshire
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Different surfaces, different methods
Metal pipes
Sealant details often cover copper and steel pipework. Pipe diameter, annular gap, sealant depth and any pipe insulation all have to match the detail, so we check each one.
Plastic pipes
In a fire, plastic pipework melts away and leaves an opening. Some intumescent sealants are tested on smaller plastic pipes. We confirm material and size first and tell you if sealant isn’t the right product.
Compartment walls and floors in Greenfoot
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
For an estates team at a campus like University of the West of Scotland (3.7 miles north-west of Greenfoot), summer M&E works are normally followed by a round of penetration sealing. For a unit at a site such as Gartsherrie Industrial Estate, 2 miles to the south of Greenfoot, new power or data runs between office and warehouse can breach a compartment wall.
Greenfoot is about 3 miles north-west of Airdrie, in North Lanarkshire. Anywhere in ML5, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. We work across 100 places in North Lanarkshire, large and small. There’s a separate page for Glasgow, roughly 10 miles from Greenfoot.
Business premises anywhere in ML5 are within our area for service penetrations. Close to Greenfoot, our area also takes in Annathill (1 mile north-west), Mollinsburn (2 miles north-west), Moodiesburn (2 miles north-west), Condorrat (2 miles north) and Westfield (3 miles north). Further afield, our area takes in Motherwell (7 miles south), Cumbernauld (4 miles north), Coatbridge (3 miles south), Airdrie (3 miles south-east), Wishaw (10 miles south-east) and Bellshill (6 miles south).
Landmarks near Greenfoot
Greenfoot’s nearest station is Gartcosh station, about 2.2 miles south-west of the centre. Nearby you will also find Antonine Centre (3.6 miles north-east) and Summerlee Museum of Scottish Industrial Life (2.4 miles south). Open spaces near Greenfoot include Bar Hill.
Also near Greenfoot
Other services in Greenfoot
FAQs: Greenfoot
How do Scotland’s building standards affect fire-rated sealant in Greenfoot?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Could you schedule work at a campus like University of the West of Scotland for the vacation?
Yes. Tell us the term dates, vacation periods and access windows, and we’ll plan the work around them. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Will you quote for a small job?
We quote for single jobs as well as large packages and programmes. Photos and a description are enough to start.
Do you take on multi-site work?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Do you offer coloured sealant?
It depends on the product specified. Some ranges offer many colours, others very few, so we’ll confirm the colours available for the specified product with the quote.
Is it fine to apply new sealant on top of old?
No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
Common problems we fix in Greenfoot
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are the usual culprits.
Common reasons buildings call us in:
- Fire-stopping items raised at inspection or handover
- Openings found when ceilings come down for a refit
- Non-fire-rated filler around services
- Fire sealant pulled out of the opening
Colleges such as New Lanarkshire College - Coatbridge Campus (to the south of Greenfoot) add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product.
What your quote should include
- Their public liability cover
- How they’ll work around occupants
- Will RAMS and insurance details be available?
- Whether their applicators hold CSCS cards
Site staff or a sealant specialist?
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Diagnose, treat, sign off
We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and your contact hears from us before we move to the next area. Where we can, we combine work around Greenfoot with other jobs nearby, to make the most of each trip. Tell us how flexible your dates are.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Point out any areas we must not close
- Let us know about inductions and permits
- Send your site hours and access windows
Get a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, give us a call on 01277 525 020 or use the quote form.
Read more
When it isn’t the sealant
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Large openings beyond what any sealant detail covers
- Gaps in walls that were never built as compartment walls
- Deciding what a wall or floor needs, which belongs to the designer
If you’re not sure, just speak to us on 01277 525 020 or send details through our quote form and we will give you a straight answer before you book.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Cable penetrations
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers