North Lanarkshire · Scotland
Commercial sealant contractors in ML5
Our applicators cover all of the ML5 postcode district, which takes in Coatbridge, Old Monkland and Carnbroe. Failed sealant is always cut out completely, with a 12-month guarantee.
Mastic and sealant across ML5
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Towns and villages in ML5
What we do in ML5
- Fire-rated sealing and fire stopping
- Commercial sealant contractors
- Expansion and movement joint sealing
- Construction and new-build mastic
- Coloured and colour-matched sealant
- Commercial washroom and wet-area sealing
- Mastic sealing for building owners and managing agents
- Facade and window perimeter sealing
- Industrial and floor joint sealing
- See all services
Tell us what needs doing and your postcode for a fixed quote: phone 01277 525 020 or send photos by email.
Nearby postcode districts
More in North Lanarkshire
Every town in North Lanarkshire
All areas
Commercial sealant contractors in ML5: how it works
Having a single contact for all your sites makes sealant far simpler to manage. We take on one-off reseals, runs of jobs across a portfolio and planned maintenance programmes, run the same way on every site: send details, get a fixed quote, we seal, and a 12-month guarantee once it’s signed off. To get a programme moving in ML5, phone 01277 525 020 or email us with the site addresses. We work on kitchen worktops and splashbacks, external facade joints and floor and threshold joints, and the failures we’re asked to look at most are wall and floor joints that have lost their seal and sanitary sealant that has gone black and patchy.
Occupied buildings need a little choreography. We sign and contain the area we are in, with routes through the building left open and move on in phases so staff and visitors can carry on around us.
- First, details come to us: photographs, drawings or a schedule of the areas, or we arrange a site visit.
- Next comes a diagnosis and a fixed quote.
- Before anything is cut out, we agree access, timings and sequence.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- We fit backing to the right depth, prime where specified and lay the new bead.
- We walk the completed areas with you and sign them off under the 12-month guarantee.
Pricing in ML5
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote and we’ll explain how it’s made up.
Why choose Mastic Doctor
- Workmanship guaranteed for 12 months
- Constructionline member for supplier checks
- Standard and matched colours in many product ranges
- Fully insured
Request a quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, give us a call on 01277 525 020 or use the quote form.
Around Coatbridge
We work on buildings around St Mary's Rc Church, The Vulcan pub and St. Ambrose High School, among other places. Coatbridge has its own railway station: Whifflet station. A little further out are Coathill Hospital (less than half a mile south) and Summerlee Museum of Scottish Industrial Life (0.9 miles north). Green spaces nearby include Strathclyde Loch.
Commercial premises across ML5
Commercial buildings across ML5 range from older premises altered many times to recent units on business parks. Surfaces decide the sealant, from masonry to powder-coated frames and shop-fit panels.
Our area covers every Scottish council area, ML5 included. Longer journeys are planned so each job is done in one go if at all possible.
Coatbridge: If you run a unit on an estate such as Dundyvan Industrial Estate (less than half a mile west of Coatbridge), the trade counter, offices and staff facilities have joints to look after as well as the warehouse. Premises within reach of Whifflet station (under half a mile east of Coatbridge) often have busy frontages where joints are seen by everyone passing.
Why it fails
Resealing over the top is a false economy we come across often. Fresh sealant won’t stick to the old bead underneath, so the top layer lifts, holds water and hides what’s going on. By the time it shows, there can be two or three layers to cut out.
It’s worth sending us details if you spot any of the following:
- A top-up bead over failed sealant, now lifting
- Messy, uneven beads from earlier work that let the building down
- Expansion joints with the sealant torn out
- Window and door perimeter joints that have cracked open
How the job changes by surface
Facade and cladding joints
On a facade, a failed joint is often only visible close up. Close-up photographs or a site visit tell us what’s needed.
Fire-rated seals where specified
Where the specification calls for fire-rated or intumescent sealant around service penetrations or linear gaps, we install it to the product’s tested detail. The design and sign-off of fire stopping belong to the designer and building control; we install what’s specified.
Work for main contractors and building owners
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Why act early?
Some low prices are low because nothing gets cut out. Sealing over looks tidy at handover, then lifts once the joint starts moving. Our prices always include removal of the failed bead and full joint preparation.
What your quote should include
- Who will actually carry out the work
- Whether old or failed sealant will be cut out, not overlaid
- Do they follow the manufacturer’s priming guidance?
- Proof of insurance
When to bring in a specialist
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Your questions answered
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it.
How do we get a quote?
Send photographs, drawings or a list of locations through our quote form. Where we need to see it, we will arrange a site visit, then send a fixed quote.
Do you cover ML5?
Yes. ML5 falls within our area, and the simplest way to start is to call the office on 01277 525 020 or email drawings and photos.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators.
Is your work guaranteed?
It’s backed by our 12-month guarantee. Should anything we did fail within that period, let us know.
Can one contractor look after sealant on all our buildings?
Yes, within the areas we cover: South East England, Greater London and Scotland. Each site gets the same process and a single contact.
Which sealant will you use?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.