Fire stopping in Gott
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Gott. Send photos or drawings for a fixed quote.
- Fire-rated sealant that has cracked or shrunk back
- Seals disturbed by maintenance and left open
- Snag lists that include open service penetrations
Fire stopping across Gott
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our fire stopping in Gott
We should be clear about what we do and don’t do. The designer, fire engineer or building control decides which fire stopping is required; sign-off sits with them too. What we bring is careful installation of the specified sealant, to the maker’s guidance on buildings around Gott. We work on small duct penetrations where the tested detail allows, joints between fire-resisting walls and floors and cable penetrations, and the failures we are asked to look at most are openings left by services added after handover and unsealed joints where partitions meet the slab. Whoever orders the work in Gott, the brief is normally the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Around smaller places such as Gott, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Those penetrations are closed with the product the specification names, built up as tested.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Where
- Gott (ZE2)
- Region
- Shetland Islands
- Cover
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Diagnose, treat, sign off
Site rules come first: signing in, inductions and any permit to work. With the paperwork done, the joints are worked through in the order agreed with your site contact. Jobs near Gott are often grouped with others in the same area. Let us know if your dates have any give.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Tell us what induction or permit system the site runs
- Send your site hours and access windows
- Share the asbestos register for older buildings
Ask for a quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Advice
Fire stopping in Gott: the local picture
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. We install fire-rated sealant to that tested detail where it is specified. For an island location such as Gott, work is planned around ferry crossings and the weather. We need the specification and a count of penetrations before we sail.
Hotels like Herrislea House Hotel, 1 mile south of Gott, are refurbished in phases, and each phase can open up compartment walls. Industrial units on estates such as Black Hill Industrial Estate, 2.4 miles to the south-east of Gott, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. Hospital estates such as Montfield Hospital (to the south-east of Gott) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Gott is in the Shetland Islands. Any commercial site in Gott is covered. Gott is one of 63 places we cover in the Shetland Islands.
If you need fire stopping in ZE2, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. If your site is on Stura, Gorsten and Gaet-a-Gott or close by, we can quote for service penetrations. Sites close to Gott are covered too, including Veensgarth (1 mile south-west), Gremista (3 miles south-east), Heogan (3 miles south-east), Lerwick (4 miles south-east) and Kalliness (4 miles north-west). Further afield, our area takes in Scalloway (4 miles south-west), Brae (15 miles north) and Sandwick (13 miles south). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Landmarks near Gott
Nearby you’ll also find Montfield Hospital (3.7 miles south-east) and Tingwall Agricultural Museum (1.3 miles south-west). Open spaces near Gott include Setter Hill and Strand Loch.
How the job changes by surface
Metal pipes
Sealant details often cover copper and steel pipework. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on and we confirm each before sealing.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access to these areas is planned with you in advance along with any permits your site needs.
What we can’t put right
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Walls or floors that aren’t fire-resisting to begin with
- Writing the fire-stopping specification
- Fire risk assessments, a job for a competent assessor
Not sure which it is? You can speak to us on 01277 525 020 or email the details over and we will tell you honestly.
Joints and surfaces we work on
- Linear gaps at wall heads
- Service gaps in risers
- Cable penetrations
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
What else we do in Gott
What affects the price in Gott
Sealant work doesn’t have a standard rate, since sites vary so much. What we take into account:
- Site requirements such as inductions and permits
- Distance, for remote addresses
- Access and working height
- Joint width, depth and condition
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
What we need to price the job
However big the job, the same details help:
- Whether the building will be occupied during the work
- Clear photographs of the problem areas
- Specification clauses that apply
- Drawings or a marked-up plan, if available
For a fixed quote, give us a call on 01277 525 020 or email a schedule or drawings. You can also send details through our quote form.
Your questions answered
Would you work within a site like Montfield Hospital?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Do you work on the island where Gott is?
Yes. We work across every Scottish council area, and that includes island locations such as Gott. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.
What will the job cost?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote and we will price it properly.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Is fire stopping in Scotland covered by different guidance?
Our area runs from Greater London and the South East to every part of Scotland. Scotland’s non-domestic Technical Handbook, clause 2.1.14, expects service penetrations to be fire stopped to at least the wall or floor’s fire resistance, with proprietary products tested for the end use.
Can you send site paperwork?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
Doing it in-house
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
For managing agents and facilities managers
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, with CSCS-carded applicators on site.