Gott expansion joint sealing
Need expansion joint sealing in Gott? It’s simple: send details, get a quote, we seal, guaranteed.
- Chipped joint edges on forklift routes
- Debris jammed in movement joints
- Brittle, chalky sealant on external joints
Expansion joint sealing for Gott sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle expansion joint sealing in Gott
Floor movement joints in warehouses, retail and public buildings carry wheeled traffic. Without a sound filler, joint edges chip and spall under load. We will tell you if the edges need repairing before sealing. If you have rain penetration at brick or block movement joints and layers of sealant in a movement joint, we can put it right, whatever the surface. Most enquiries from Gott start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Travel to smaller places like Gott is planned so the work is done in one trip where possible. Photos, approximate widths and what uses the floor help us bring the right materials.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Location
- Gott (ZE2)
- Region
- Shetland Islands
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Why it’s worth doing now in Gott
Re-sealing with the same product that failed is often a false economy. A higher movement class, or a design change by the engineer, may be needed and we’ll tell you honestly. Around smaller places like Gott, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Early resealing prevents it.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why appoint us
- Colour agreed before work starts
- 12 months’ guarantee on every job
- Fully insured, including public liability cover
- Joints cleaned back to sound surfaces
Take a look at how commercial sealant jobs are priced and our accreditations and insurance.
Questions about Gott
Will you travel to Gott on the island?
Yes. We cover the whole of Scotland, and that includes island locations such as Gott. Ferry times and the weather set the plan, so we ask for photographs and a full list first.
Can you work at a site such as Black Hill Industrial Estate, by Gott?
Yes. Estates, retail parks and business parks around Gott, Black Hill Industrial Estate among them, are all within reach. Photos and a short description are enough for a first look.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
What’s the quickest route to a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photographs and a postcode.
What’s the difference between an expansion joint and a movement joint?
The general name is movement joint, and expansion joint is one common type. In everyday use the two names are often swapped.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
Will you come and look before quoting?
It depends on the job. Straightforward work can often be priced from photographs and measurements, while larger or less clear jobs get a site visit first.
Should maintenance staff do it?
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
What the job involves on each surface
Car park decks and ramps
Deck and ramp joints take tyre loads, grit and de-icing salts. We use a sealant made for wheel loads and the expected movement.
Internal floor movement joints
Floor joints include saw-cut joints and construction joints. A semi-rigid filler is common in trafficked industrial floors and a flexible sealant where the joint moves more.
More services for Gott
Maintenance after handover
Cleaning and maintenance staff play a part too. Pass these on to them:
- Check joints after long freezing spells
- Note which joints were done, when, and with what
- Plan racking layouts so feet don’t land on a joint
- Leave barriers in place until fresh joint sealant has cured
Fresh joint sealant needs its full cure time before it takes traffic or water. How long that takes depends on the product, the temperature and the depth of the joint and we’ll tell you when each bay or area can reopen. Keeping the area coned off until then avoids tyre marks and damage.
External wall joints that fail let rain into the masonry and cavity. It can surface inside as damp a long way from the joint. Catching it early keeps the water outside.
Expansion joint sealing around Gott: what changes locally
Gott lies within about 1 mile of the sea. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so a failed joint lets more in and the edges break up sooner. The 3 miles around Gott take in at least three named trading estates, business parks or retail parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
On industrial estates such as Black Hill Industrial Estate, 2.4 miles to the south-east of Gott, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic. Hospital campuses such as Montfield Hospital, 3.7 miles to the south-east of Gott, grow in stages, leaving movement joints wherever new blocks meet old. Across sites such as Lower Black Hill Industrial Estate, which lies south-east of Gott, floor and movement joints can be sealed in phases so units keep working.
Gott is in the Shetland Islands. We cover Gott and the rest of the Shetland Islands, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 63 places in the Shetland Islands.
Business premises anywhere in ZE2 are within our area for movement joints. If your site is on Stura, Gorsten and Gaet-a-Gott or close by, send details and we’ll quote for movement joints. Nearby places we also cover include Veensgarth (1 mile south-west), Gremista (3 miles south-east), Heogan (3 miles south-east), Lerwick (4 miles south-east) and Kalliness (4 miles north-west) for movement joints. Bigger towns within reach include Scalloway (4 miles south-west), Brae (15 miles north) and Sandwick (13 miles south). For island and remote sites, travel and materials need planning ahead, so include the location in your enquiry.
What’s near Gott
Other landmarks nearby include Montfield Hospital (3.7 miles south-east) and Tingwall Agricultural Museum (1.3 miles south-west). Open spaces near Gott include Setter Hill and Strand Loch.
Building owners, agents and FMs in Gott
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Gott can sit alongside others in a wider programme across the Shetland Islands.
How a job runs
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself normally takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing, and we clear our waste as we work. Tell us who will meet us and how to get in at your building near Gott. That goes into the plan alongside the quote.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
What we need from you
- Point out parking and an unloading spot
- Share your working hours and any access restrictions
- For older buildings, check the asbestos register before work
Get a fixed quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. If you have questions first, ring 01277 525 020 or send details through our quote form.