Fire stopping in Glenmavis
Fire-rated and intumescent sealing of service penetrations and linear gaps in Glenmavis. CHAS accredited and fully insured, with a 12-month guarantee.
- Damaged fire seals in risers and voids
- Open linear gaps along the top of fire-resisting walls
- Unsealed openings around new pipes and cables
Fire stopping in Glenmavis
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle fire stopping in Glenmavis
We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control. What we bring is careful installation of the specified sealant, to the maker’s guidance on buildings around Glenmavis. Site teams most often ask us about seals that don’t match their tested detail and service penetrations left open after M&E works, on joints between fire-resisting walls and floors, linear gaps at wall heads and cable penetrations. Whoever orders the work in Glenmavis, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
In smaller Scottish places like Glenmavis, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Work we carry out comes with a 12-month guarantee. If an installation problem shows up, give us a call on 01277 525 020 or email a schedule or drawings and we’ll arrange a return visit.
- Where
- Glenmavis (ML6)
- Region
- North Lanarkshire
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
What we can’t put right
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be one of these:
- Openings that need collars, wraps, batts or boards rather than sealant
- Walls or floors that aren’t fire-resisting to begin with
- Reviewing a building’s overall fire safety
If in doubt, call the office on 01277 525 020 or send details through our quote form and we will say what we think.
Where we work in Glenmavis
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Service gaps in risers
What sets the cost
What shapes the price:
- How accessible the joints are
- The total length or number of joints
- Whether old sealant has to be cut out first
- The size and state of each joint
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
What to include in your enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- The type of building and who uses it
- Drawings or a marked-up plan, if available
- The site address and postcode
- A wide shot and a close-up of the area
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call 01277 525 020 or send details through our quote form with what you know.
Questions about Glenmavis
Is Glenmavis off your patch?
No. Small places get the same service as large ones. Every Scottish council area is within our area. Good photographs up front let us bring everything on the first visit.
Will you plan work around the academic year at somewhere like New Lanarkshire College - Coatbridge Campus?
Yes, holiday working periods are the norm on campus jobs. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
How long will the new sealant last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Do you seal openings left by new services?
Yes, provided a specification covers them. Openings left by new services are among the most common jobs we see and we close them with the specified product.
How many days will you need on site?
The duration is planned around your programme and the access we are given. You’ll have an expected duration with the quote.
Do you design or specify fire stopping?
No. The specification comes from your designer, fire engineer or building control. Our role is installing what they specify, to the product’s tested detail.
Does weather matter for sealant work?
Outside, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
How a job runs
We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. For work around Glenmavis, we aim for one trip, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- First we go through the drawings, schedule or specification for the seals.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Tell staff and tenants when we will be in
- Flag any permit to work we will need
- Make sure the joints can be reached
Quotes
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, phone 01277 525 020 or send details through our quote form.
Related advice
What we are called out for in Glenmavis
A common fault is a product that was never fire-rated in the first place: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position, so it has to come out.
If one of these sounds familiar, it’s time for a closer look:
- Builders’ foam or ordinary silicone in compartment walls
- Head-of-wall gaps with no fire seal
- Fire-stopping items raised at inspection or handover
- Damaged fire seals in risers and voids
At a college such as New Lanarkshire College - Coatbridge Campus, 1.5 miles to the south-west of Glenmavis, checking penetration seals after summer M&E works is good practice.
Before you book anyone
- Proof of insurance
- The terms of the workmanship guarantee
- How the existing material will be dealt with
- Who will actually carry out the work
Owners, agents and contractors
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first, with CSCS-carded applicators on site.
Where services cross fire walls in Glenmavis
A 2-mile radius around Glenmavis takes in a number of hotels. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
Hotels such as Tudor Hotel, 1.4 miles to the south of Glenmavis, rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. For a building such as Parish Church, new heating or data runs are the usual reason penetrations need sealing.
Glenmavis is about 2 miles north-west of Airdrie, in North Lanarkshire. We cover Glenmavis and the rest of North Lanarkshire, with the same fixed quotes and 12-month guarantee as everywhere else. Glenmavis is one of 100 places in North Lanarkshire on our list. Glasgow is covered too, some 11 miles away.
We take on service penetrations across the ML6 postcode area, whatever the building. If your site is on Glenwell Street, Glenview Street and Glenmavis Road or close by, we can quote for service penetrations. Close to Glenmavis, our area also takes in New Monkland (1 mile north-east), Burnfoot (1 mile south-east), Airdrie (2 miles south-east), Airdriehill (2 miles east) and Plains (2 miles east). Nearby towns on our patch include Motherwell (6 miles south), Cumbernauld (5 miles north), Wishaw (8 miles south), Bellshill (5 miles south), Kilsyth (7 miles north) and Viewpark (4 miles south-west).
Landmarks near Glenmavis
The nearest railway station is Coatdyke station, roughly 1.4 miles south of the centre. Nearby you’ll also find Monklands Hospital (1.3 miles south) and Weavers Cottage Museum (1.3 miles south-east).
Places near Glenmavis
More services for Glenmavis
Site staff or a sealant specialist?
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.