Fire-rated sealing and fire stopping in Plains, North Lanarkshire
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Plains and the surrounding area. Send details for a fixed quote.
- Open linear gaps along the top of fire-resisting walls
- Fire seals cut back for extra cables and never reinstated
- Openings found when ceilings come down for a refit
Fire stopping near Plains
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle fire stopping in Plains
The test standards are BS EN 1366-3 for penetration seals and BS EN 1366-4 for linear joints and the results are classified to BS EN 13501-2. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. So our job is to reproduce that arrangement faithfully. If you have snag lists that include open service penetrations and openings left by services added after handover, we can help. Most enquiries from Plains start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Refurbishments in small hotels, schools and care homes around places like Plains can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Plains (ML6)
- Wider area
- North Lanarkshire
- Guarantee
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
On site: what to expect
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. For work around Plains, we aim for one trip, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Flag any permit to work we’ll need
- Send any specification or drawings in advance
- Share the asbestos register for older buildings
Quotes
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, speak to us on 01277 525 020 or email a schedule or drawings.
Advice
Common questions from Plains clients
Can you work at a site such as Flowerhill Industrial Estate, by Plains?
Yes. We cover Plains and the area around it, including industrial estates, business parks and retail parks such as Flowerhill Industrial Estate. A few photographs and the unit address let us price the work.
Is hospital work, at somewhere like Wester Moffat Hospital, something you do?
Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.
How long do sealant joints last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
How many days will you need on site?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
How do you choose the sealant?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Do you work in Plains?
Yes. Sites across Plains are covered.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout.
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Towns and villages near Plains
What else we do in Plains
Do you need fire stopping in Plains?
Some seals fail because the wrong product went in: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position, so it has to come out.
If one of these sounds familiar, it’s time for a closer look:
- Fire seals cut back for extra cables and never reinstated
- Unsealed openings around new pipes and cables
- Unsealed joints where partitions meet the slab
- Hidden openings found during inspections
Where a unit on an estate such as Flowerhill Industrial Estate (1.7 miles south-west of Plains), has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Comparing quotes
- How the joint faces will be prepared and primed
- What the guarantee covers, and for how long
- Whether old or failed sealant will be cut out, not overlaid
- Can the work be phased to keep areas open?
Different surfaces, different methods
Plastic pipes
Plastic pipes soften and collapse in a fire. Small sizes are sometimes covered by an intumescent sealant detail, though larger ones normally call for a collar or wrap. We confirm material and size first and tell you if sealant isn’t the right product.
Drylining partitions
Drylined fire walls are tested in a particular build-up. The sealant detail has to be tested in that wall type, with the stated board layers before sealing.
What sealant work can’t fix
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Gaps in walls that were never built as compartment walls
- Approving the work on behalf of building control
- Large openings beyond what any sealant detail covers
Not sure which it is? You can call the office on 01277 525 020 or email drawings and photos and we’ll tell you honestly.
What we seal
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Pipe penetrations
- Service gaps in risers
- Small duct penetrations where the tested detail allows
Cost factors for service penetrations
Your fixed quote is built from the real scope. It takes account of:
- The product specified
- Joint width, depth and condition
- Travel to remote or island sites
- How much there is to seal
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
What to include in your enquiry
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- Specification clauses that apply
- Whether an asbestos survey exists
- The type of building and who uses it
- Approximate linear metres or a joint schedule
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or send photos by email.
Compartment walls and floors in Plains
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with products tested for that end use. We install what’s specified, to the product’s tested detail.
Older community buildings such as Clarkston Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification. Hospital estates such as Wester Moffat Hospital (1 mile south of Plains) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Plains is about 2 miles north-east of Airdrie, in North Lanarkshire. Businesses, contractors and managing agents in Plains use us for work on service penetrations. We work across 100 places in North Lanarkshire, large and small. Glasgow is covered too, some 13 miles away.
Anyone looking for fire stopping in ML6 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Among the streets we cover are Main Street, Station Road and East Avenue. Just outside Plains, we also work in Airdriehill (1 mile west), Moffat Mills (1 mile south), Gartness (2 miles south), Airdrie (2 miles south-west) and Burnfoot (2 miles west). Nearby towns on our patch include Motherwell (6 miles south), Cumbernauld (5 miles north-west), Coatbridge (4 miles south-west), Wishaw (7 miles south), Bellshill (6 miles south-west) and Kilsyth (8 miles north-west).
Near you in Plains
The nearest railway station is Drumgelloch station, about 1.2 miles south-west of the centre. A little further out are Wester Moffat Hospital (1 mile south) and Weavers Cottage Museum (2.2 miles south-west). Green spaces nearby include Black Loch.