Fire-rated sealing and fire stopping in Dunollie, Argyll and Bute
Commercial sealant work in Dunollie for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Openings found when ceilings come down for a refit
- Fire-rated sealant that has cracked or shrunk back
- Seals that don’t match their tested detail
Fire stopping in Dunollie
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Your questions answered
How do the Scottish rules apply to fire-rated sealing in Dunollie?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Can you work on a hospital site such as Lorn and Islands Hospital?
Yes, hospitals are one of the sectors we cover. We follow the site’s permits, sign-in and infection-control procedures in every area.
Is your workmanship covered by a guarantee?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
Do you offer coloured sealant?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
Can staff carry on working while you are here?
Yes, with some planning. Tell us your site hours and access windows and we’ll plan around them.
Can weather delay the job?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
How we handle fire stopping in Dunollie
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We hold no third-party fire-stopping installer certificate, and we won’t pretend otherwise. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. If you have fire-stopping items raised at inspection or handover and unsealed penetrations discovered above suspended ceilings, we can help, on small duct penetrations where the tested detail allows, joints between fire-resisting walls and floors and linear gaps at wall heads alike. Searching for sealant specialists in Dunollie? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
Travel to smaller places like Dunollie is planned so every penetration is sealed on one trip. Send the specification and photographs of the openings, with sizes if you have them.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Dunollie (PA34, PA37)
- Region
- Argyll and Bute
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
When something else is needed
We check first that sealant really is the fix. It isn’t the answer for:
- Fire risk assessments, a job for a competent assessor
- Deciding what a wall or floor needs, which belongs to the designer
- Signing off or certifying a building’s fire stopping
Not sure which it is? You can call the office on 01277 525 020 or email drawings and photos and we will tell you honestly.
What we seal
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Pipe penetrations
What sets the cost
Sealant work doesn’t have a standard rate, because every site is different. What we take into account:
- Location, for remote and island sites
- Removal of failed or old sealant
- Access and working height
- Joint width, depth and condition
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Sending details for a quote
However big the job, the same details help:
- Whether an asbestos survey exists
- The site address and postcode
- The type of building and who uses it
- The product your specification calls for
For a fixed quote, phone 01277 525 020 or email the details over. Our quote form is another easy route.
Maintenance after handover
A few simple habits keep the new joints working:
- Report damaged or disturbed seals as soon as they’re spotted
- Keep general-purpose fillers away from compartment walls
- Get seals inspected before ceilings and boxing close
- Leave fire sealant to cure fully before covering it
After the work, brief anyone else working in the area that the openings are now sealed. Any seal cut back for a new service needs reinstating to its tested detail using the same product.
On fit-outs, get the fire-stopping specification agreed before the services go in. The designer can then choose details that suit the services planned, and the work runs in step with the M&E.
Penetration seals near Dunollie
There are a good number of hotels within about 2 miles of Dunollie. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
For a school such as Oban High School, penetration sealing fits best at the end of the summer works. Halls and meeting rooms at places like Christ Church Dunollie sometimes gain new services, and any compartment wall crossed needs the specified seal. Theatres, wards and plant rooms at sites like Lorn and Islands Hospital, 1.4 miles south of Dunollie, all have compartment walls crossed by services.
Dunollie is about 1 mile north of Oban, in Argyll and Bute. Any commercial site in Dunollie is covered, for single jobs and planned programmes alike. Dunollie is one of 124 places we cover in Argyll and Bute. For work in that direction, see our Glasgow page, about 61 miles away.
We take on service penetrations across the PA34 and PA37 postcode area, whatever the building. Streets here include Croft Road, Rowan Road and Castle Road, and sites on any of them can send details for a fixed quote. Access to Dunollie is via the A85, so getting applicators and materials to site is simple. Nearby places we also cover include Oban (1 mile south), Ganavan (1 mile north), Dunbeg (2 miles north-east), Kilmore (4 miles south-east) and Connel (4 miles north-east) for service penetrations. Dunollie is one of the busier places in Argyll and Bute, and we take on service penetrations for its commercial and public buildings. For island and remote sites, we plan travel and materials carefully, so include the location in your enquiry.
Local landmarks in Dunollie
In Dunollie, that means premises near Oban Inn and the streets around them. For rail, the closest station is Oban station, about 0.6 miles south. A little further out are Lorn and Islands Hospital (1.5 miles south) and Oban Museum (less than half a mile south). Open spaces near Dunollie include Lochan Dubh.
Site staff or a sealant specialist?
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
How a job runs
Inspect, seal, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. Tell us who will meet us and how to get in at your building near Dunollie. We’ll confirm the plan with the fixed quote.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Before we start on site
- Tell us what induction or permit system the site runs
- Point out parking and an unloading spot
- Tell staff and tenants when we’ll be in
Quotes
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Related advice
Other services in Dunollie
Why deal with it now?
Open service penetrations matter on ordinary days, not just in a fire: smoke, noise and draughts pass through them every day. The specified fire seal closes the gap for all of these and the building feels the difference. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Early resealing prevents it.
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we will explain how it’s made up.
Why clients in Dunollie choose us
- Products installed to the manufacturer’s instructions
- Joints cleaned back to sound surfaces
- Health and safety: CHAS accredited
- Our applicators hold CSCS cards
Take a look at what affects the cost and our accreditations and insurance.