Fire-rated sealing and fire stopping in Bunnahabhain, Argyll and Bute
Fire-rated and intumescent sealing of service penetrations and linear gaps in Bunnahabhain. CHAS accredited and fully insured, with a 12-month guarantee.
- Seals disturbed by maintenance and left open
- Penetration schedules that need working through
- Hidden openings found during inspections
Fire stopping across Bunnahabhain
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
When to bring in a specialist
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
How we handle fire stopping in Bunnahabhain
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4 and the results are classified to BS EN 13501-2. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. Reproducing the tested arrangement on site is the part we take care of. We work on cable penetrations, linear gaps at wall heads and joints between fire-resisting walls and floors, and the failures we’re asked to look at most are hidden openings found during inspections and head-of-wall gaps with no fire seal. Searching for sealant specialists in Bunnahabhain? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
Hotels and care homes around smaller places like Bunnahabhain often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.
- Where
- Bunnahabhain (PA46)
- Wider area
- Argyll and Bute
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Questions we are asked in Bunnahabhain
Will you design a fire-stopping scheme for our building in Bunnahabhain?
No. The designer or fire engineer sets the detail and building control accepts it. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
How do the Scottish rules apply to fire-rated sealing in Bunnahabhain?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. Design sits with the designer and the verifier; installation to the tested detail is our part.
How many days will you need on site?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
What hours do you work?
We’re in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Is it fine to apply new sealant on top of old?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Do you offer coloured sealant?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Do you cover Bunnahabhain?
Yes. Sites across Bunnahabhain are covered, and the same phone number covers every area.
What we are called out for in Bunnahabhain
Most open service penetrations are left by later work. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser leaves an opening that nobody returns to. Over a few years of fit-outs, a wall can collect a lot of these.
Most enquiries start with one or more of the following:
- Fire-rated sealant that has cracked or shrunk back
- Head-of-wall gaps with no fire seal
- Fire seals cut back for extra cables and never reinstated
- Unsealed penetrations discovered above suspended ceilings
Wherever the building is near Bunnahabhain, design and sign-off of fire stopping sit with the designer, fire engineer or building control; we install what has been specified.
Before you book anyone
- Their approach to joint depth and backing
- How they handle RAMS and site documents
- Do they follow the manufacturer’s priming guidance?
- The named product and why it was chosen
How a job runs
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you, and each area is checked before we leave it. Jobs near Bunnahabhain are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Explain the parking and delivery arrangements
- Let us know about inductions and permits
- Share the asbestos register for older buildings
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to give us a call on 01277 525 020 or email drawings and photos with what you know.
Advice
Different surfaces, different methods
Cables and cable bundles
New data and power cables are the most common breach we see. We reseal around them to the specified detail.
Metal pipes
Copper and steel pipes are a common service penetration for fire-rated sealant. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on.
Nearby places to Bunnahabhain
Also in Bunnahabhain
Owners, agents and contractors
We work for building owners and managing agents on everything from one building to a spread of sites. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
Cost factors for service penetrations
A fixed quote reflects the actual work. It takes account of:
- Joint width, depth and condition
- How much existing material needs removing
- Any access equipment needed
- Which sealant the job calls for
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Before you send an enquiry
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- How the joints are reached, and at what height
- The asbestos register, for older buildings
- The product your specification calls for
- Whether the building will be occupied during the work
To get a fixed quote, ring 01277 525 020 or use the quote form. Our quote form is another easy route.
Where services cross fire walls in Bunnahabhain
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. We install fire-rated sealant to that tested detail where it is specified.
For buildings in and around Bunnahabhain, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Bunnahabhain is in Argyll and Bute. If you’re looking for fire stopping in Bunnahabhain, we can help. Bunnahabhain is one of 124 places we cover in Argyll and Bute. Sites around Glasgow have their own page, roughly 72 miles from Bunnahabhain.
We cover the PA46 postcode districts. We also cover Port Askaig (2 miles south), Keills (3 miles south), Craighouse (7 miles east), Bowmore (11 miles south-west) and Scalasaig (13 miles north) for service penetrations. For island and remote sites, we plan travel and materials carefully.
Near you in Bunnahabhain
Other landmarks nearby include Finlaggan Castle (3.8 miles south-west). The countryside around Bunnahabhain includes Giùr-bheinn and Ardnahoe Loch.