South East England and London
Fire Stopping in Bracknell Forest
We cover 48 towns and villages across Bracknell Forest for fire stopping, with failed joints always cut out and a 12-month guarantee on our workmanship.
Fire Stopping in Bracknell Forest
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in every part of Bracknell Forest
Fire-rated and intumescent sealing of service penetrations and linear gaps. Choose your town from the list to see local details, and call or email us for a quote.
Largest places
What else we do in Bracknell Forest
- Mastic sealing for building owners and managing agents
- Commercial sealant contractors
- Expansion and movement joint sealing
- Facade and window perimeter sealing
- Construction and new-build mastic
- Industrial and floor joint sealing
- Coloured and colour-matched sealant
- Commercial washroom and wet-area sealing
Postcode districts
Fire stopping in Bracknell Forest: how it works
Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, and they are easy to forget. We close the openings listed on your schedule, using the specified sealant and detail. Most enquiries involve openings found when ceilings come down for a refit and head-of-wall gaps with no fire seal, on linear gaps at wall heads, cable penetrations and joints between fire-resisting walls and floors.
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
What you’ll pay
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why choose Mastic Doctor
- CSCS-carded applicators
- Sealing commercial buildings since 2005
- Fully insured, including public liability cover
- Constructionline member for supplier checks
Quotes
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. For a chat about it beforehand, call the office on 01277 525 020 or email us.
Local landmarks in Bracknell
In Bracknell, that means premises near Market Inn, Holy Trinity Church and The Brakenhale School and the streets around them. You’ll also find Ranelagh School (under half a mile east) and Wildridings Primary School (0.5 miles south-west). There’s a railway station in Bracknell itself: Bracknell station. Other landmarks nearby include The Lexicon (0.5 miles north) and Pinewood Hospital (2.6 miles south-west). For a walk, there’s Heath Lake and Wildmoor Heath.
Fire stopping across Bracknell Forest: the area picture
In Bracknell Forest, as anywhere, the fire-stopping detail is set by the designer and accepted by building control. We install what has been specified, using the right product for the substrate and the services.
The South East has large numbers of business parks and industrial estates, especially around the motorway corridors, and Bracknell Forest is part of the area we cover.
Bracknell: Wherever services are added at a hospital such as Heatherwood Hospital, 2.8 miles east of Bracknell, the compartment line has to be made good with the specified product. For an estates team at a campus like Imperial College Silwood Park Campus, which lies east of Bracknell, summer M&E works are typically followed by a round of penetration sealing.
Signs you need fire stopping
When a seal departs from its tested detail, the evidence no longer covers it. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are what we find most often.
Most enquiries start with something like this:
- Fire stopping installed outside its tested range
- Unsealed penetrations discovered above suspended ceilings
- Open linear gaps along the top of fire-resisting walls
- Old intumescent sealant that has split away
Why act early?
Open service penetrations matter on ordinary days, not just in a fire: smoke, noise and draughts pass through them every day. Sealing them to the specified detail deals with the fire risk first.
What your quote should include
- How they’ll work around occupants
- Is the sealant right for the movement and the substrate?
- Proof of insurance
- How the joint faces will be prepared and primed
Building owners, agents and FMs in Bracknell Forest
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Cost factors for service penetrations
Your fixed quote is built from the real scope. It takes account of:
- The site’s rules and procedures
- Phasing around occupants
- Joint width, depth and condition
- Distance, for remote addresses
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.
What we need to price the job
Good information means a firmer quote. When you get in touch, include:
- Drawings or a marked-up plan, if available
- Any specification or named product
- Photos of the joints, close up and from further back
- Whether an asbestos survey exists
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Different surfaces, different methods
Metal pipes
Sealant details often cover copper and steel pipework. Pipe diameter, annular gap, sealant depth and any pipe insulation all have to match the detail and we confirm each before sealing.
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access to these areas is planned with you in advance along with any permits your site needs.
Your questions answered
Are you fully insured?
Yes. We are fully insured, including public liability cover.
Will you come and look before quoting?
Many jobs can be quoted from photographs, drawings or a joint schedule. Where they aren’t, we arrange a site visit.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout.
Will you quote for a small job?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
Do you certify or sign off fire stopping?
No. Approval sits with the designer, principal designer or building control. We’ll confirm the product and detail installed, and you can tell us what other records you need at quote stage.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.