Fire Stopping in Brookside
Looking for fire stopping in Brookside? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Fire-rated sealant that has cracked or shrunk back
- Openings left by services added after handover
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping for businesses in Brookside
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire-rated sealing for Brookside buildings
At about 26 miles from central London, Brookside is within reach of the capital. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls, and the gaps need sealing with the specified product. In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
Offices at parks like Ascot Business Park (to the south of Brookside) are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail. For a hotel such as The Royal Foresters Hotel (1.4 miles south-west of Brookside), penetration seals are worth checking after any refit or services upgrade.
Brookside is about 3 miles east of Wick Hill, in Bracknell Forest. Any commercial site in Brookside is covered. Across Bracknell Forest, 48 places are covered, including Brookside. Reading is covered too, some 13 miles away.
We cover the SL5 and SL4 postcode districts for service penetrations. Buildings on New Road, The Avenue and Coach Road are within our area for service penetrations. Sites close to Brookside are covered too, including North Ascot (1 mile south-west), Plaistow Green (1 mile north), Woodside (1 mile north-east), Ascot (1 mile south-east) and Winkfield (1 mile north-west). Nearby towns on our patch include Bracknell (3 miles west), Sandhurst (7 miles south-west), Wick Hill (3 miles west), Priestwood (4 miles west), Lawrence Hill (3 miles west) and Binfield (4 miles west).
What’s near Brookside
In Brookside, that means premises near Royal Hunt pub and Ascot Heath Church of England Junior School and the streets around them. For rail, the closest station is Ascot station, roughly 1.3 miles south. Other landmarks nearby include Heatherwood Hospital (1 mile south) and The Lexicon (3 miles west). Open spaces near Brookside include Virginia Water Lake.
Fire stopping in Brookside, done properly
It helps to set out our role at the start. Deciding the specification sits with the designer, the fire engineer and building control; sign-off sits with them too. What we bring is careful installation of the specified sealant, to the maker’s guidance in Brookside and nearby. The enquiries we see most involve old intumescent sealant that has split away and service penetrations left open after M&E works, on joints between fire-resisting walls and floors, small duct penetrations where the tested detail allows and pipe penetrations. A single leaking joint is often how a building in Brookside first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For a smaller site near Brookside, we plan to do all the penetrations in one go, with the specification and photographs sent in advance. Design and sign-off belong to the designer or building control; we install what’s specified.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Place
- Brookside (SL5, SL4)
- Wider area
- Bracknell Forest
- Guarantee
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Nearby places to Brookside
More services for Brookside
How a job runs
When we get to site, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before anything is cut or cleaned, and the work usually takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Smaller jobs around Brookside can be grouped with others nearby. A fixed quote is given before anything starts.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Tell staff and tenants when we’ll be in
- For older buildings, check the asbestos register before work
- Flag any permit to work we will need
Request a quote
For a fixed quote, speak to us on 01277 525 020 or send details through our quote form. You can also send details through our quote form.
Related advice
Quoting for work in Brookside
What shapes the price:
- Joint width, depth and condition
- Quantities, in metres or numbers
- Distance, for remote addresses
- Which sealant the job calls for
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
Before you send an enquiry
For an accurate fixed quote, we need to understand the site. Useful things to include:
- Rough lengths or quantities, or drawings if you have them
- Your programme or deadline
- What the building is and how it’s used
- Asbestos survey details if the building is older
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Surface by surface
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. An oversized hole may be outside the sealant’s range and we will tell you what the detail says instead.
Metal pipes
Metal pipes conduct heat, so their details often call for extra measures along the pipe, and some details add wrapping or a set length of insulation. We follow whatever the detail requires and flag anything we can’t match.
Looking after the joints
Keep the joints in good shape with a few simple steps:
- Ask the designer to confirm details early on refits
- Flag new cables with no seal around them
- Don’t let anyone top up a fire seal with the wrong product
- Get seals inspected before ceilings and boxing close
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Some fire-rated sealants accept paint and some don’t, so check the product data first.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. Then the seal goes in while the area is open.
What we’re called out for in Brookside
A common fault is a product that was never fire-rated in the first place: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position, so it has to come out.
Common reasons buildings call us in:
- Open linear gaps along the top of fire-resisting walls
- Hidden openings found during inspections
- Fire seals cut back for extra cables and never reinstated
- Service penetrations left open after M&E works
In a building such as Chapel of St Mary and St John, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Before you book anyone
- What level of public liability insurance do they hold?
- Do they follow the manufacturer’s priming guidance?
- What site paperwork they can supply
- What the guarantee covers, and for how long
When to bring in a specialist
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Your questions answered
Could you schedule work at a campus like Imperial College Silwood Park Campus for the vacation?
Yes. We plan campus work around teaching, exams and residence turnarounds. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Is a smaller place like Brookside outside your area?
Not at all. Brookside is within our area. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
What’s the quickest route to a quote?
There are four steps: send details, get a quote, we seal, guaranteed. The first step only needs photographs and a postcode.
Do you need to see the site first?
It depends on the job. Simple work can often be priced from photos, and bigger or more complex jobs normally get a visit.
Can the sealant be colour-matched?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We will confirm the colours available for the specified product.