Fire-rated sealing and fire stopping in Tickleback Row, Bracknell Forest
Fire stopping in Tickleback Row, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Penetration schedules that need working through
- Hidden openings found during inspections
- Seals that don’t match their tested detail
Fire stopping for Tickleback Row sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle fire stopping in Tickleback Row
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. Before we seal anything, we check the opening against the detail it is meant to follow, and we say so if it doesn’t fit. If you have open linear gaps along the top of fire-resisting walls and penetration schedules that need working through, we can help. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Tickleback Row it comes down to the same thing: the right product in a properly prepared joint.
Rural conversions around Tickleback Row can put new fire-resisting partitions inside older structures. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we’re clear about what is covered before work starts.
- Place
- Tickleback Row (RG42)
- Region
- Bracknell Forest
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Our process
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes anything from one day to a planned run of visits, depending on the number of seals and the access, and our waste is bagged and taken away as we go. Smaller jobs around Tickleback Row can be grouped with others nearby. A fixed quote is given before anything starts.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
What we need from you
- Share your working hours and any access restrictions
- Make sure the joints can be reached
- Have the specification and drawings to hand
Get a fixed quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to call the office on 01277 525 020 or use the quote form.
Read more
How the job changes by surface
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers and the installation has to fit inside those limits.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access is often tight, so we agree it with you in advance, including keys, permits and any isolations.
Questions we’re asked in Tickleback Row
Would you work within a site like Heatherwood Hospital?
Yes, healthcare and care buildings are part of our work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Could you schedule work at a campus like Newbold College of Higher Education for the vacation?
Yes. Tell us the term dates, vacation periods and access windows, and we’ll plan the work around them. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
What site paperwork can you supply?
Each site asks for different documents, so tell us what you need and we will confirm it when we quote.
How long does a job like this take?
We plan the time on site around your programme and access. You’ll have an expected duration with the quote.
Will you write the fire-stopping specification?
No, we don’t design fire stopping. Once you have a specification, we can price and install the sealant elements of it, and tell you if a detail needs another product.
Can one quote cover more than one building?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout.
Do you take on small jobs?
Single areas, one-off repairs and whole buildings are all quoted the same way: send details, get a fixed quote, we seal, guaranteed.
Do you need fire stopping in Tickleback Row?
Openings in fire-resisting walls normally appear when services are added or changed. New cabling, rerouted pipework or a data route drilled through a riser can leave the hole behind. Across several fit-outs, the openings add up.
Typical triggers for a call:
- Fire sealant pulled out of the opening
- Snag lists that include open service penetrations
- Unsealed openings around new pipes and cables
- Fire stopping installed outside its tested range
For a building at a site such as Bracknell Enterprise Centre (2.2 miles south of Tickleback Row), a check of penetration seals after each fit-out is good practice.
What to look for in a quote
- How they handle RAMS and site documents
- Which product they’ll use, and why it suits the joint
- Their public liability cover
- How they’ll work around occupants
Work for main contractors and building owners
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Service penetrations in Tickleback Row buildings
Central London is about 29 miles from Tickleback Row. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls; the gaps need the specified seal. For England, the fire stopping of penetrations is dealt with in Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail.
In a school such as Garth Hill College, fire-rated sealant goes in around service penetrations where it is specified. For a site team at a college like Newbold College of Higher Education, 2 miles south-west of Tickleback Row, fire-rated sealing is best scheduled after the summer works.
Tickleback Row is about 3 miles north of Bracknell, in Bracknell Forest. Our applicators travel to Tickleback Row for work on service penetrations. We work across 48 places in Bracknell Forest, from busy centres to rural villages. For work in that direction, see our Reading page, about 10 miles away.
Postcode districts covered here: RG42 for service penetrations. Nearby places we also cover include Moss End (1 mile east), Jealott's Hill (1 mile north), Warfield (1 mile east), Hawthorn Hill (1 mile north-east) and Newell Green (1 mile south) for service penetrations. Further afield, our area takes in Bracknell (3 miles south), Sandhurst (7 miles south), North Ascot (3 miles south-east), Great Hollands (3 miles south), Forest Park (3 miles south) and The Warren (3 miles south-east).
Local landmarks in Tickleback Row
For rail, the closest station is Bracknell station, about 2.3 miles south. Nearby you’ll also find The Lexicon (2.1 miles south) and Heatherwood Hospital (3.9 miles south-east). The countryside around Tickleback Row includes Holt Copse & Joel Park and Weycock Hill.
Cost factors for service penetrations
The price varies from site to site. Expect it to depend on:
- Joint width, depth and condition
- Quantities, in metres or numbers
- Distance, for remote addresses
- Whether old sealant has to be cut out first
The specified product makes a difference, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Before you send an enquiry
To price the job accurately, we need to understand the site. Send us:
- The type of building and who uses it
- Any dates the work must fit around
- Asbestos survey details if the building is older
- A wide shot and a close-up of the area
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
General trades versus a specialist
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.