The Wisp facade sealing
Sealant work in The Wisp for main contractors, managing agents and facilities managers: facade joint and window perimeter sealing on commercial buildings, quoted at a fixed price.
- Old perimeter mastic that has dried out
- Weathered joints at frame-to-structure perimeters
- Facade joints cracked through the middle
Need facade sealing in The Wisp?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Mastic packages on The Wisp sites
The sea is no more than about 2 miles from The Wisp. Coastal exposure means perimeter and cladding joints work harder than on an inland job, so joint design, primers and product choice deserve extra care. Scotland has its own building regulations, and in The Wisp warrants come from the local authority verifier. We seal to the specification that sits behind the warrant.
For contractors refurbishing units at places like Craigmillar Shopping Centre, which lies north-west of The Wisp, the mastic covers cladding panels, roller-door and window perimeters. Building work at universities like University of Edinburgh Bioquarter, 0.6 miles to the south-west of The Wisp, is often timed for the summer, mastic included.
The Wisp is about 3 miles south-west of Musselburgh, in Edinburgh. Looking for facade sealing in The Wisp? We can help, as we do across Edinburgh. We work across 174 places in Edinburgh, from busy centres to rural villages.
Work on facade joints is covered throughout EH16, EH22 and EH15, for business premises of every kind. For a building on Aspen Road, Friary Road and Campion Road or nearby, we can quote for facade joints. Close to The Wisp, our area also takes in Greendykes (1 mile north-west), Niddrie (1 mile north-east), Niddrie Mains (1 mile north), Little France (1 mile south-west) and Bingham (1 mile north). Further afield, our area takes in Edinburgh (4 miles west), Leith (4 miles north-west), Bonnington (4 miles north-west), Greenside (3 miles north-west), Broughton (3 miles north-west) and Bellevue (4 miles north-west).
Near you in The Wisp
Around The Wisp, our work takes us to commercial buildings near Craigmillar Castle Park and Portobello Library and the streets around them. For rail, the closest station is Newcraighall station, about 1.3 miles north-east. Other landmarks nearby include Craigmillar Castle (0.8 miles west) and Cameron Toll Shopping Centre (1.7 miles west). Green spaces nearby include Duddingston Loch and Nether Hill.
Facade sealing in The Wisp, done properly
Access is part of every facade job, and we plan it with you before quoting. Let us know what access exists or is planned, and any site rules we need to work around. Site teams most often ask us about failed sealant on precast panel joints and leaks at window and door perimeters, across shopfront frames, stone and brick facade joints and coping and flashing joints. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in The Wisp is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Sites in Scottish city centres tend to be hemmed in, with deliveries and storage to plan. We work to the programme and the site rules, with CSCS-carded applicators.
Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Where
- The Wisp (EH16, EH22, EH15)
- Region
- Edinburgh
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
What we’re called out for in The Wisp
Cohesive failure, a split through the middle of the bead, points to an over-stretched joint. Too thin a bead, too narrow a joint or a product with the wrong movement class are common reasons.
What tends to prompt an enquiry:
- Sealant pulling away from frames or panels
- Cladding panel joints that have opened up
- Air leaks through failed facade joints
- Unsightly perimeter sealant on a visible elevation
When a school such as Castlebrae Community High School is extended or refurbished, the mastic package is often squeezed into the holidays.
What your quote should include
- Their public liability cover
- Whether old or failed sealant will be cut out, not overlaid
- Their plan for phasing and protecting the area
- Who will actually carry out the work
Our process
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Give us the access times and building rules for your premises in The Wisp, and we’ll plan the work to suit, phased where areas need to stay in use.
- Photos, drawings or a visit tell us about the joints and the access.
- We confirm the joint type, movement and the specified product.
- Failed beads are removed in full and the joint faces cleaned.
- Primer goes on where the product data asks for it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- The finished joints are checked with you.
Getting the site ready
- Point out any areas we must not close
- Arrange parking or a loading space
- Make sure the joints can be reached
Get a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Related advice
When to bring in a specialist
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
What sealant work can’t fix
Sealant solves a lot, but not everything, and we’re upfront when that’s the case. These need a different solution:
- Render or concrete edges that have broken away
- Specialist high-level access methods
- Installing or repairing glazing systems
If you are not sure, just call the office on 01277 525 020 or email us and we will give you a straight answer before you book.
Joints and surfaces we work on
- Coping and flashing joints
- Cladding panel joints
- Shopfront frames
- Perimeter joints where frames meet the structure
- Window and door perimeters
- Stone and brick facade joints
Nearby places to The Wisp
Other services in The Wisp
Looking after the joints
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Brief window cleaners about newly sealed joints
- Keep sills, gutters and drainage paths clear
- Investigate damp beside windows promptly
- Combine resealing with other works that need access
Keep gutters, sills and drainage paths clear. Good drainage keeps water moving off the facade instead of soaking the joints.
Don’t wait for a full elevation to fail. Small repairs stop small leaks becoming large ones behind the facade.
Building owners, agents and FMs in The Wisp
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around The Wisp. Several sites can go on one quote, which keeps the paperwork simple.
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Questions about The Wisp
Does the sea air around The Wisp change the choice of sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Who do we deal with for shared-part sealing on a tenement in The Wisp?
Typically through the property factor, once the owners have agreed. We can quote to the factor or to the owners, for a single close or a whole block.
Do you replace windows or glass?
No. A glazing contractor handles that. What we seal are the joints around frames and panels on commercial buildings.
How long does a job like this take?
We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.
Do you provide access for facade work?
We agree access with the client at the start. Tell us about access: existing scaffold, what you are arranging and any site restrictions.
Do you take on multi-site work?
Yes. Multi-site work and planned programmes are a core part of the service, planned site by site to suit how each building is used.
How long before the joints can be used?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.