Facade Sealing in Scrabster
Planning work on a facade joint in Scrabster? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Facade joints cracked through the middle
- Damp patches beside frames after rain
- Discoloured or dirty facade joints
Facade sealing in Scrabster
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Facade sealing in Scrabster, done properly
Every facade quote starts with how the joints will be reached. Let us know what access exists or is planned, and any site rules we need to work around, and we will fit the work around it. Most enquiries involve previous reseals run over old sealant and cladding panel joints that have opened up, on shopfront frames, stone and brick facade joints and cladding panel joints. Whoever orders the work in Scrabster, the brief is normally the same: a clear scope, tidy work and joints that don’t fail again.
Outside mastic in Scotland needs a dry, frost-clear joint, and in a place like Scrabster that means watching the forecast. We build some give into the plan and agree it with the site manager.
Whoever the client is, the cover is the same: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Scrabster (KW14)
- Region
- Highland
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Contractors’ notes for Scrabster
Scrabster is within about 1 mile of the coast. Schemes this close to the sea see their facade joints tested by wind and rain from the day they’re sealed, so joint design, primers and product choice deserve extra care. Being in the east of Scotland, Scrabster gets less rain than the west coast. Cold, damp starts still stop external sealing on some days. We agree external dates with the site team and keep internal work ready.
When a school such as Thurso High School is extended or refurbished, the mastic package is often squeezed into the holidays. Extensions at sites like Dunbar Hospital, 1.9 miles south of Scrabster, normally sit beside working departments, and the mastic follows strict access rules.
Scrabster is about 2 miles north-west of Thurso, in Highland. Looking for facade sealing in Scrabster? We can help, as we do across Highland. 256 places across Highland fall within our area, Scrabster among them.
Anyone looking for facade sealing in KW14 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Clett Terrace, St Clair Avenue and Holborn Place or close by, send details and we will quote for facade joints. Close to Scrabster, our area also takes in Thurso (2 miles south-east), Glengolly (3 miles south), Janetstown (3 miles south), Forss (3 miles west) and Murkle (4 miles east). For island and remote sites, we plan travel and materials carefully, so the full address helps from the start.
Around Scrabster
The nearest railway station is Thurso station, roughly 1.7 miles south-east. Nearby you will also find Dunbar Hospital (1.9 miles south) and Scrabster Castle (0.9 miles south-east).
Other services in Scrabster
Questions we’re asked in Scrabster
Can being near the sea in Scrabster affect the sealant we need?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We check the specified product suits the exposure and pay close attention to preparation.
Is hospital work, at somewhere like Dunbar Hospital, something you do?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Are you insured?
Yes. We are fully insured, and the certificate can go with your quote.
Should we check old sealant for asbestos?
For older buildings, yes, check before work starts. The duty to manage asbestos sits with the dutyholder, and we will ask to see it. Suspect material is left alone until it has been tested.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Which sealant do you use on facades?
The product follows the joint’s movement, the surfaces and the specification. BS EN 15651 Parts 1 and 2 cover facade and glazing sealants, and specifications often name them and we follow the specified product.
How do we ask for a quote?
You can use the quote form on this site; alternatively, phone 01277 525 020 or email a schedule or drawings. Include photographs or drawings if you have them.
Diagnose, treat, sign off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Travel to smaller Scottish places like Scrabster is planned so the job is finished in one visit where possible, so photos, sizes and a full list matter. External joints need a dry spell as well.
- We plan access and the order of elevations with the client.
- We only seal when joints are dry and within the product’s temperature range.
- We remove the old bead and check the edges are sound.
- Faces are cleaned, primed where needed and backed.
- Sealant is gunned in and tooled hard onto both faces.
- Once signed off, the work carries our 12-month guarantee.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Clear stock, furniture or equipment away from the joints
- Tell us your opening times and when work is allowed
Ask for a quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Related advice
Looking after the joints
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. We suggest:
- Brief window cleaners about newly sealed joints
- Ask about asbestos in pre-2000 mastic
- Investigate damp beside windows promptly
- Inspect facade joints on a regular cycle
Keep a note of which product went in and when. Future work can then match the product and colour without guesswork.
Don’t wait for a full elevation to fail. Small repairs stop small leaks becoming large ones behind the facade.
How the job changes by surface
Coping and flashing joints
Where the specification calls for sealant at copings or flashings, we can seal them. These joints take full exposure to weather, so preparation and product choice matter.
Window and door perimeters
Frames grow and shrink with temperature, and the perimeter joint has to follow. The rod limits depth, leaving the bead able to flex.
General trades versus a specialist
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Quoting for work in Scrabster
Before we quote, we look at:
- Backing rod, priming and other preparation
- Whether old sealant has to be cut out first
- How accessible the joints are
- Travel to remote or island sites
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What to include in your enquiry
Whether it’s one area or a whole building, these details speed things up:
- The site address and postcode
- What the building is and how it’s used
- Anything awkward about access or site hours
- A wide shot and a close-up of the area
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, speak to us on 01277 525 020 or email a schedule or drawings.
What happens if it’s left?
Patch repairs over old sealant tend to come back. A full cut-out and reseal costs more on the day but lasts much longer, so you aren’t paying for the same joint twice. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, giving water time to get in. Resealing early avoids that.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why us?
- Workmanship guaranteed for 12 months
- Clear, fixed quotes
- Sealing commercial buildings since 2005
- Standard and matched colours in many product ranges
Read our cost guide and our accreditations.