Facade Sealing contractors in Murkle
Facade sealing in Murkle, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Perimeter joints where frames meet the structure
- Gaps between rainscreen or cladding panels
- Facade joints cracked through the middle
Facade sealing near Murkle
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Facade sealing in Murkle
A good facade joint depends on design as much as product. The width has to suit the expected movement and the sealant’s movement capability, and closed-cell rod sets the depth, keeping the bond to two faces with the ratio the sealant maker recommends, often around 2:1. Most enquiries involve draughts around frames and panels and sealant pulling away from frames or panels, across perimeter joints where frames meet the structure, coping and flashing joints and shopfront frames. Whether you call it commercial sealant work, mastic application or joint sealing, in Murkle it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Sites near smaller places like Murkle can mean longer travel, so the mastic is planned with as few trips as the job allows. Send drawings, photos and the programme so everything needed arrives on the first day.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Place
- Murkle (KW14)
- Region
- Highland
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Commercial clients in Murkle
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Murkle can sit alongside others in a wider programme.
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Our process
Diagnose, treat, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. For work around Murkle, we aim for one trip, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- First we review photographs, drawings or what we saw on a visit, and agree how each joint will be reached.
- Failed sealant is cut out along its full length.
- Joint faces are cleaned to firm, sound material, with primer where the sealant maker specifies it.
- Closed-cell rod fixes the depth, and the sealant grips two sides only.
- The new sealant goes in and is tooled firmly onto both faces.
- The completed runs are checked with you, then the 12-month guarantee applies.
Preparing the site
- Send your site hours and access windows
- Make sure the joints can be reached
- Arrange parking or a loading space
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Related advice
Looking after the joints
A few simple habits keep the new joints working:
- Ask about asbestos in pre-2000 mastic
- Clear debris that holds water against joints
- Insist on a full cut-out when joints are renewed
- Record the product and colour used on each elevation
Record the sealant type and date on the building file. Future work can then match the product and colour across the elevation.
Coordinate facade sealing with other external works. One set-up for several trades saves money and cuts time on site.
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Building and refurbishing in Murkle
Murkle lies within about 1 mile of the sea. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, and the sealant, primer and backing need choosing with that in mind. Scotland has its own building regulations, and in Murkle warrants come from the local authority verifier. The mastic package follows the approved specification.
On any site in or around Murkle, the mastic follows the specification and the programme. For a contractor working at a hospital such as Dunbar Hospital, 3.7 miles to the west of Murkle, perimeter and facade sealing is planned around patients and deliveries.
Murkle is about 3 miles east of Thurso, in Highland. If you’re looking for facade sealing in Murkle, we can help. 256 places across Highland fall within our area, Murkle among them.
We cover the KW14 postcode districts for facade joints. Just outside Murkle, we also work in Castletown (2 miles east), Thurso (3 miles west), Dunnet (4 miles north-east), Scrabster (4 miles west) and Glengolly (4 miles south-west). For island and remote sites, travel and materials need planning ahead, so the full address helps from the start.
Near you in Murkle
The closest station to Murkle is Thurso station, roughly 3.2 miles west of the centre. Well-known places in the area include Thurso Heritage Museum (3.6 miles west) and Dunbar Hospital (3.7 miles west). Green spaces nearby include St John's Loch.
Questions we are asked in Murkle
Would you work within a site like Dunbar Hospital?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Is Murkle too small for you to travel to?
Not at all. Murkle is within our area. Every Scottish council area is within our area. We plan jobs in smaller places so return trips are kept to a minimum.
What about RAMS and site documents?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
Do you take on multi-site work?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
Should we check old sealant for asbestos?
For older buildings, yes, check before work starts. The dutyholder holds the asbestos register. Suspect material is left alone until it has been tested.
Do you hold CHAS accreditation?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Is it okay to overlay old mastic?
No. Overlaying is a shortcut that peels away quickly. We remove the failed sealant, clean the faces, set the depth and reseal.
Other services in Murkle
Surface by surface
Perimeter joints at frames and structure
Perimeter joints at frames often show their age first. We cut them out, prepare both faces and reseal to the specification with a product suited to glazing perimeters.
Render and coated surfaces
Sealant can only hold as well as the render or paint beneath it. We remove flaking material so the bead bonds to a firm surface, and we’ll mention any edges that need repair.
What we can’t put right
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Render or concrete edges that have broken away
- Installing or repairing glazing systems
- Joints whose design needs changing by the specifier
If in doubt, ring 01277 525 020 or email a schedule or drawings and we’ll say what we think before you book.
What we seal
- Stone and brick facade joints
- Window and door perimeters
- Shopfront frames
- Cladding panel joints
- Coping and flashing joints
- Perimeter joints where frames meet the structure