Glengolly facade sealing
Facade joint and window perimeter sealing on commercial buildings throughout Glengolly and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Unsightly perimeter sealant on a visible elevation
- Old perimeter mastic that has dried out
- Gaps between rainscreen or cladding panels
Facade sealing near Glengolly
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Facade sealing for commercial buildings in Glengolly
We don’t install glazing systems or replace glass. What we seal are the joints around them: the frame-to-structure perimeter, panel-to-panel joints and window and door surrounds. If you have discoloured or dirty facade joints and cladding panel joints that have opened up, we can put it right, whatever the surface. Looking for mastic applicators who cover Glengolly? We have been sealing commercial buildings since 2005, with CSCS-carded applicators.
Construction around smaller Scottish places like Glengolly is often one-off schemes: a school, a health centre, a hotel extension or a few houses. Exposed elevations in Scotland put facade and perimeter joints to work from day one, so the sealant choice matters.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Glengolly (KW14)
- Wider area
- Highland
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What we can’t put right
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Arranging specialist high-level access, which is planned with the client
- Replacing glass or failed glazing units
- Render or concrete edges that have broken away
Not sure which it is? You can phone 01277 525 020 or email drawings and photos and we’ll tell you honestly before you book.
Surfaces we seal
- Stone and brick facade joints
- Cladding panel joints
- Window and door perimeters
- Shopfront frames
- Coping and flashing joints
- Perimeter joints where frames meet the structure
Contractors’ notes for Glengolly
Glengolly sits close to the coast, within about 3 miles. Schemes this close to the sea see their facade joints tested by wind and rain from the day they’re sealed, and the sealant, primer and backing need choosing with that in mind. Being in the east of Scotland, Glengolly gets less rain than the west coast. Frosty spells still affect external mastic dates. External mastic is planned with the site manager for workable conditions.
For contractors at a school such as Thurso High School, sealing has to be finished before term starts.
Glengolly is about 2 miles south-west of Thurso, in Highland. Looking for facade sealing in Glengolly? We can help, as we do across Highland. 256 places across Highland fall within our area, Glengolly among them.
We cover the KW14 postcode districts for facade joints. Sites close to Glengolly are covered too, including Janetstown (1 mile west), Thurso (2 miles north-east), Scrabster (3 miles north), Westfield (3 miles south-west) and Forss (4 miles north-west). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you ring 01277 525 020 or email drawings and photos.
What’s near Glengolly
The closest station to Glengolly is Thurso station, about 1.5 miles north-east. Other landmarks nearby include Scrabster Castle (2.1 miles north) and Dunbar Hospital (0.9 miles north). Green spaces nearby include Loch Calder.
Do you need facade sealing in Glengolly?
Overlaying old sealant is a common shortcut that fails quickly. Fresh silicone won’t stick to cured silicone, and the patch soon lifts.
Common reasons buildings call us in:
- Patch repairs that keep failing
- Cladding panel joints that have opened up
- Leaks at window and door perimeters
- Old perimeter mastic that has dried out
On a healthcare site such as Dunbar Hospital, 0.9 miles north of Glengolly, new blocks and refurbishments go on while the hospital keeps running, so mastic work is sequenced carefully.
What to look for in a quote
- Is the sealant right for the movement and the substrate?
- How joint depth will be controlled
- What the guarantee covers, and for how long
- Proof of insurance
Also in Glengolly
Maintenance after handover
To get the most from the new sealant:
- Keep sills, gutters and drainage paths clear
- Inspect facade joints on a regular cycle
- Check the asbestos register before old mastic is disturbed
- Plan facade sealing alongside redecoration
Hold back any cleaning crew until the joints have had their stated cure time. Pressure washers and harsh cleaners can damage a fresh bead.
Get the joint design right when resealing: the right width, backing rod and a sealant with enough movement capability. A well-designed joint lasts longer than a like-for-like copy of a failed one.
Building owners, agents and FMs in Glengolly
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Why act early in Glengolly
A few metres of new sealant compare well with replacing ceilings, linings or damaged stock. Water through a failed joint rarely stays where it starts, so the real damage is often some distance away. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Glengolly, a repair visit takes planning, so it’s better to act early.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Why clients in Glengolly choose us
- Sealing commercial buildings since 2005
- Old sealant cut out, never sealed over
- Workmanship guaranteed for 12 months
- One number for every site we cover
From enquiry to sign-off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Tell us who will meet us and how to get in at your building near Glengolly. We will confirm the plan with the fixed quote.
- We plan access and the order of elevations with the client.
- Weather and temperature are checked against the product’s limits.
- We remove the old bead and check the edges are sound.
- Joints are cleaned, primed if required and fitted with backing rod.
- Sealant is gunned in and tooled hard onto both faces.
- Once signed off, the work carries our 12-month guarantee.
Before we start on site
- Agree which areas must stay open
- Confirm the product named in the specification
- Let us know about inductions and permits
Get a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Related advice
Common questions from Glengolly clients
Can you work on a hospital site such as Dunbar Hospital?
Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.
Is a smaller place like Glengolly outside your area?
Not at all: smaller places are covered as well as towns. Every Scottish council area is within our area. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
How many days will you need on site?
That varies with the scale of the job, but the work normally takes a day or two for a few elevations, and longer where access has to be moved around the building. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Can you look at water coming in around a frame?
Yes. Photos are often enough to start, followed by a visit if needed. Many frame leaks are sealant failures, though not all, and we’ll tell you which.
Can staff carry on working while you are here?
Yes, with some planning. Tell us your site hours and access windows and we’ll plan around them.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Do you run new sealant over the existing bead?
No. Overlaying is a shortcut that peels away quickly. We remove the failed sealant, clean the faces, set the depth and reseal.