Fire Stopping in Scrabster
Sealant work in Scrabster for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Penetration schedules that need working through
- Head-of-wall gaps with no fire seal
- Damaged fire seals in risers and voids
Fire stopping across Scrabster
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Scrabster, done properly
Facilities managers in Scrabster often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it. Where there isn’t one, the designer or fire engineer needs to set one first. If you’re dealing with fire stopping installed outside its tested range and service penetrations left open after M&E works, we can help. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Scrabster, that means joint design, primers and backing rod as standard.
Travel to smaller places like Scrabster is planned so every penetration is sealed on one trip. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Every job is signed off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Place
- Scrabster (KW14)
- Region
- Highland
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Why deal with it now?
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail, and doing it once, properly, is cheaper. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, giving water time to get in. Early resealing prevents it.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
What you get with us
- Fixed quotes based on photos, drawings or a visit
- Over 20 years of commercial sealing
- Old sealant cut out, never sealed over
- One phone line for London, the South East and Scotland
Commercial clients in Scrabster
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
What we can’t put right
We check first that sealant really is the fix. It won’t put right:
- Fire doors, dampers or other fire safety equipment
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Large openings beyond what any sealant detail covers
If in doubt, speak to us on 01277 525 020 or use the quote form and we will say what we think.
Joints and surfaces we work on
- Linear gaps at wall heads
- Cable penetrations
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Service gaps in risers
- Small duct penetrations where the tested detail allows
What else we do in Scrabster
Fire stopping around Scrabster: what changes locally
A good number of hotels sit less than 2 miles from Scrabster. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Theatres, wards and plant rooms at sites like Dunbar Hospital, 1.9 miles to the south of Scrabster, all have compartment walls crossed by services. In a school such as Thurso High School, fire-rated sealant goes in around service penetrations where it is specified.
Scrabster is about 2 miles north-west of Thurso, in Highland. We cover Scrabster and the rest of Highland, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. We work across 256 places in Highland, large and small.
If you need fire stopping in KW14, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Buildings on Clett Terrace, St Clair Avenue and Holborn Place are within our area for service penetrations. Sites close to Scrabster are covered too, including Thurso (2 miles south-east), Glengolly (3 miles south), Janetstown (3 miles south), Forss (3 miles west) and Murkle (4 miles east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you call 01277 525 020 or email the details over.
Local landmarks in Scrabster
Scrabster’s nearest station is Thurso station, about 1.7 miles south-east. Well-known places in the area include Dunbar Hospital (1.9 miles south) and Scrabster Castle (0.9 miles south-east).
FAQs: Scrabster
How do the Scottish rules apply to fire-rated sealing in Scrabster?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Is Scrabster off your patch?
Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Will you just go over the old sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Can you fit around our working hours?
Mention the site’s hours and access windows in your enquiry, and we’ll schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
How long do sealant joints last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Is the work guaranteed?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
What do you charge?
We don’t publish prices, as every site differs. With photos or drawings, we can give you a fixed quote.
From enquiry to sign-off
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and work section by section so the rest of the building stays in use. Travel to smaller Scottish places like Scrabster is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Send your site hours and access windows
- Tell us which areas need to stay in use
- Let building users know which areas are affected
Get a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call 01277 525 020 or send details through our quote form with what you know.
Related advice
Quoting for work in Scrabster
Sealant work doesn’t have a standard rate, because every site is different. What we take into account:
- Which sealant the job calls for
- The site’s rules and procedures
- Distance, for remote addresses
- Joint width, depth and condition
The price depends on the quantity of joints, how much old material needs removing and the access. Call for a quote when you are ready.
What we need to price the job
A few photos plus some basic facts will normally do. Please tell us:
- Your programme or deadline
- Whether an asbestos survey exists
- Anything awkward about access or site hours
- The product your specification calls for
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. For smaller jobs, photos and a description will do.
Doing it in-house
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.