Construction and new-build mastic in Murkle, Highland
Work needed on a mastic package in Murkle? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- External joints sealed in damp or cold conditions that are now failing
- Different trades sealing to different standards
- Oversized or tapered gaps around new frames
Construction mastic near Murkle
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Facades, frames and programmes in Murkle
With the shore within about 1 mile, Murkle counts as a coastal location. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, which puts weight on correct joint sizing, priming and a sealant suited to the exposure. The east of Scotland, where Murkle is, gets less rain than the west. Cold, damp starts still stop external sealing on some days. External dates keep a little give.
For contractors building in or near Murkle, we seal to the drawings, the specification and the programme.
Murkle is about 3 miles east of Thurso, in Highland. Businesses, contractors and managing agents in Murkle can call on us for mastic packages. We work across 256 places in Highland.
Business premises anywhere in KW14 are within our area. Sites close to Murkle are covered too, including Castletown (2 miles east), Thurso (3 miles west), Dunnet (4 miles north-east), Scrabster (4 miles west) and Glengolly (4 miles south-west). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Near you in Murkle
For rail, the closest station is Thurso station, roughly 3.2 miles west. Nearby you will also find Thurso Heritage Museum (3.6 miles west) and Dunbar Hospital (3.7 miles west). Green spaces nearby include St John's Loch.
Construction mastic in Murkle
Refurbishment work needs a slightly different approach from new build. Old beads come out completely, as fresh silicone can’t grip old, and on older buildings we ask for the asbestos survey before disturbing anything. New and existing joints then get the same preparation. We work on brick and block movement joints, window and door perimeters and sanitary and kitchen joints, and the usual reasons a site gets in touch are mastic snags holding up handover and window and door perimeters that won’t pass inspection. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Murkle, that means joint design, primers and backing rod as standard.
For a site around Murkle, we plan the mastic in as few trips as the programme allows. Send drawings, photographs and the programme so everything needed arrives on the first day.
Every job we finish is backed by a 12-month workmanship guarantee, in Murkle as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Where
- Murkle (KW14)
- Region
- Highland
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
When something else is needed
A proper diagnosis includes knowing what sealant can’t do. You’ll hear from us if the cause turns out to be one of these:
- Approving fire stopping as compliant
- Frames fitted out of tolerance
- Faulty frames rather than failed sealant
If you’re not sure, just give us a call on 01277 525 020 or send photos by email and we will give you a straight answer.
Joints and surfaces we work on
- Brick and block movement joints
- Window and door perimeters
- Internal decorators’ caulk
- Cladding and panel joints
- Floor and skirting junctions
- Sanitary and kitchen joints
What else we do in Murkle
Keeping the joints sound
Once the work is signed off, a little attention goes a long way:
- Plan external elevations with the weather in mind
- Record the products used in the O&M file
- Brief following trades on areas that have been sealed
- Stick to the specified sealant rather than a generic substitute
Tell the builders’ clean team which areas have new sealant. Blades and abrasive pads are the commonest cause of damage at the final clean.
External joints sealed in poor weather are a common cause of early failure. Holding off until conditions suit avoids callbacks, so we plan external work with that in mind.
What sets the cost
A fixed quote reflects the actual work. It allows for:
- The product specified
- Location, for remote and island sites
- How much there is to seal
- Joint width, depth and condition
The price depends on the quantity of joints, how much old material needs removing and the access. Call for a fixed quote once you have the details.
What to include in your enquiry
The more we know, the firmer the quote. When you get in touch, include:
- Drawings or a marked-up plan, if available
- Photos of the joints, close up and from further back
- Anything awkward about access or site hours
- The product your specification calls for
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or ring 01277 525 020 or email a schedule or drawings if you’d rather talk the job through.
Murkle: questions and answers
Is Murkle off your patch?
No. Places such as Murkle are covered as much as the big towns. We cover the whole of Scotland. We plan jobs in smaller places so return trips are kept to a minimum.
Can you take on a job at a hospital such as Dunbar Hospital?
Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.
Which sealant will you use?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
Can you come in just for snagging?
Yes. Snag-only work is something we take on, cutting out damaged or poor joints and resealing them.
Can you work while the building is occupied?
Yes, with some planning. Tell us your site hours and access windows and we will plan around them.
How do you work with the site programme?
We work to your programme. Tell us the sequence and we will plan applicators around it so sealing follows the trades.
How many days will you need on site?
The duration is planned around your programme and the access we are given. You will have an expected duration with the quote.
Our process
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. For a building near Murkle, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- Drawings, the sealant specification and your programme come to us for pricing.
- A fixed quote sets out the scope, the products and the sequence.
- You tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we confirm it with the quote.
- Work follows the programme, area by area, as rooms and elevations become ready.
- Joints are cleaned, primed where the maker requires it, backed and sealed to the specification.
- Snags are cleared before handover and completed areas carry our 12-month guarantee.
What we need from you
- Let us know about inductions and permits
- For older buildings, check the asbestos register before work
- Send your site hours and access windows
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.
Advice
Do you need construction mastic in Murkle?
Swapping the specified sealant for a cheaper general-purpose product is a common cause of failure. A sealant that isn’t right for the substrate or the movement will fail ahead of time. We use what’s specified, and any substitute goes to you for acceptance.
Common reasons buildings call us in:
- Mastic snags holding up handover
- Sanitary sealant damaged by following trades
- Internal caulk splitting as the building dries out
- Inconsistent sealant finishes from plot to plot
For a contractor working at a hospital such as Dunbar Hospital, 3.7 miles west of Murkle, perimeter and facade sealing is planned around patients and deliveries.
What to look for in a quote
- Health and safety accreditation such as CHAS
- Is the sealant right for the movement and the substrate?
- Will failed sealant be removed rather than covered?
- How they’ll work around occupants
Different surfaces, different methods
Internal decorators’ caulk
Caulking is often done in a hurry by whoever’s on site. A neat, consistent caulk line makes the decorators’ job quicker and keeps the snag list down.
Fire-rated sealant where specified
Fire-rated sealant forms part of some packages, installed to the product’s tested detail where it is specified. The design and sign-off of fire stopping sit with the designer, principal designer or fire engineer; we work to the specification and the manufacturer’s installation guidance.