Scotland

Facade Sealing in Falkirk

Facade sealing in all 53 towns and villages of Falkirk, with every joint properly prepared, quoted before any work starts and a 12-month guarantee.

Book facade sealing in Falkirk

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

Facade sealing across Falkirk: what to expect

We seal window and door perimeters, cladding panel joints, external facade joints and perimeter joints where frames meet the structure on commercial buildings in Falkirk. Coping and flashing joints are included where sealant is the specified fix. We work on stone and brick facade joints, perimeter joints where frames meet the structure and coping and flashing joints, and the failures we are asked to look at most are previous reseals run over old sealant and failed sealant on precast panel joints.

Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area.

  1. Access, site rules and timing are settled with the client up front.
  2. We only seal when joints are dry and within the product’s temperature range.
  3. We remove the old bead and check the edges are sound.
  4. Joints are cleaned, primed if required and fitted with backing rod.
  5. Sealant is gunned in and tooled hard onto both faces.
  6. Once signed off, the work carries our 12-month guarantee.

How we quote

There’s no price list, since every building and every scope is different. Call for a quote and we’ll price your job on its own details.

Why clients in Falkirk choose us

  • One number for every site we cover
  • Fully insured
  • Clear, fixed quotes
  • Constructionline member for supplier checks

Request a quote

A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.

Around Falkirk

We work on buildings around Callendar Park, The Goose On Newmarket pub and Comely Park School and the streets around them. You’ll also find Falkirk High School (0.7 miles south-west) and St. Francis Xavier's Roman Catholic Church (less than half a mile north). There’s a railway station in Falkirk itself: Falkirk Grahamston station. Other landmarks nearby include Torwood Castle (4 miles north-west) and Falkirk Community Hospital (less than half a mile south-west). The countryside around Falkirk includes Callendar Lake.

Sites and facades across Falkirk

Across Falkirk, including Grangemouth, Bo'ness and Larbert, construction ranges from housing and schools to offices, units and refurbishments. Window and door perimeters, facade and cladding joints and internal sealant are sealed to the specification and the programme.

Across Falkirk, outside sealant work is planned around the weather, with a little give in the programme for wet or frosty days. In the parts of Falkirk near the sea, the elevations facing the weather are where sealant gives up first.

Falkirk: For contractors at a school such as Comely Park School, sealing has to be finished before term starts. Work at a hotel such as Orchard Hotel (under half a mile east of Falkirk) tends to be programmed around bookings, mastic included.

Cost factors for facade joints

We price every job individually. The things that drive the figure:

  • Location, for remote and island sites
  • Removal of failed or old sealant
  • Quantities, in metres or numbers
  • Joint width, depth and condition

Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.

Details that help us quote

Diagnosis starts before we arrive. Tell us:

  • Your programme or deadline
  • The postcode of the building
  • Photos of the joints, close up and from further back
  • Whether an asbestos survey exists

We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, phone 01277 525 020 or use the quote form.

Maintenance after handover

Cleaning and maintenance staff play a part too. Pass these on to them:

  • Add perimeter sealant to planned maintenance checks
  • Clear debris that holds water against joints
  • Never let anyone seal over old sealant
  • Confirm the survey covers external sealants in older buildings

Keep a note of which product went in and when. Future work can then match the product and colour across the elevation.

Tie resealing in with redecoration, cladding repairs or other access. One set-up for several trades saves money and cuts time on site.

Surface by surface

Render and coated surfaces

Rendered and painted facades need a sound edge for the sealant to bond to. Loose coatings are cleaned back first, and areas needing repair are flagged.

Cladding panel joints

Joints between cladding panels open and close with temperature. We use a product rated for the movement and suited to the panel surface, as the specification sets out.

Leave it or put it right?

Open facade joints also let air and dirt through: occupants notice draughts and cold spots around windows. Resealing deals with the draught as well as the leak.

What your quote should include

  • How the existing material will be dealt with
  • How the joint faces will be prepared and primed
  • Which product they’ll use, and why it suits the joint
  • Who will actually carry out the work

Owners, agents and contractors

Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.

Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.

Common questions from Falkirk clients

Can the building stay open while you work?

Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.

What do you charge?

It depends on the job: quantities, access, the product and any phasing. Call for a fixed quote.

What about RAMS and site documents?

Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.

What’s the quickest route to a quote?

You can use the quote form on this site; alternatively, phone 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.

Does the weather affect the work?

For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.

Is any job too small?

Small jobs are welcome alongside larger packages. Photos and a description are enough to start.

How long will the new sealant last?

Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.

Accreditations

Trusted. Accredited. Insured.