Facade Sealing in Aith
Facade joint and window perimeter sealing on commercial buildings throughout Aith and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Sealant pulling away from frames or panels
- Cold air coming in at window perimeters
- Failed sealant on precast panel joints
Facade sealing in Aith
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Different surfaces, different methods
Precast concrete panels
Precast arrises sometimes crumble or carry old residue. We clean back to sound material and flag edges that need repair.
Perimeter joints at frames and structure
These frame-to-structure joints take a lot of movement and weather. They are cut out, cleaned, backed and resealed with a product suited to glazing perimeters.
Facade sealing for commercial buildings in Aith
External joints face UV, rain, temperature swings and building movement all year, and they wear out over time. Life depends on movement, weathering, product choice and the quality of the original work. When it fails, the whole bead is cut away and the joint rebuilt. Most enquiries involve failed seals around shopfront and entrance frames and water coming in around window frames, on perimeter joints where frames meet the structure, window and door perimeters and shopfront frames. One point of contact handles commercial sealant work in Aith from the first photos to the final walk-round, for single jobs and planned programmes alike.
For a site around Aith, we plan the mastic in as few trips as the programme allows. Clear drawings, a programme and photos let us bring the right sealants, primers and backing rod first time.
Every job we finish is backed by a 12-month workmanship guarantee, in Aith as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Aith (ZE2)
- Region
- Shetland Islands
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
From enquiry to sign-off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work normally takes anything from a single day to several weeks, depending on joint lengths, access and the weather, and our waste is bagged and taken away as we go. Tell us who will meet us and how to get in at your building near Aith. We will confirm the plan with the fixed quote.
- Photos, drawings or a visit tell us about the joints and the access.
- Product choice follows the joint’s movement and substrate.
- The existing bead comes out in full.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
Getting the site ready
- Agree which areas must stay open
- Point out parking and an unloading spot
- For older buildings, check the asbestos register before work
Get a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Read more
Other services in Aith
Common questions from Aith clients
Do you work on the island where Aith is?
Yes. Our area covers all of Scotland, cities, towns and islands alike, and that includes island locations such as Aith. Island work is planned around ferry crossings and the weather, so photographs and a full list before we travel are essential.
Does the sea air around Aith change the choice of sealant?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Will you come and look before quoting?
It depends on the job. Straightforward work can often be priced from photographs and measurements, and bigger or more complex jobs usually get a visit.
Can you find out why a window is leaking?
Yes. We check the sealant joints and report what we find as part of pricing. Where the cause seems to be elsewhere, we’d rather tell you than reseal pointlessly.
Will your applicators have CSCS cards?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.
Is your workmanship covered by a guarantee?
Yes. Workmanship is guaranteed for 12 months on every job.
Can you just add new sealant on top?
No. New sealant won’t hold on old sealant, so the old bead is cut away. That is what makes the new joint last.
Why deal with it now?
A few metres of new sealant compare well with replacing ceilings, linings or damaged stock. Water through a failed joint rarely stays where it starts, often turning up far from the joint. For buildings near Aith, dealing with all the failing joints at once saves return trips. Send photographs and we will quote for everything together.
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What you get with us
- Commercial sealant work since 2005
- Workmanship guaranteed for 12 months
- Health and safety: CHAS accredited
- Clear, fixed quotes
See what affects the cost and our accreditations and insurance.
For managing agents and facilities managers
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
When to bring in a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Keeping the joints sound
To get the most from the new sealant:
- Don’t wait for a second leak before calling
- Clear debris that holds water against joints
- Brief window cleaners about newly sealed joints
- Walk the elevations once or twice a year
Anything drilled through a facade joint breaks the seal. Make sure the joint is resealed afterwards.
Coordinate facade sealing with other external works. Sharing the access keeps the cost down and cuts time on site.
Facades, frames and programmes in Aith
The sea is no more than about 1 mile from Aith. Facades and window perimeters on coastal schemes take more wind-driven rain, and salt air nearer the shore, so joint design, primers and product choice deserve extra care. For an island location such as Aith, work is planned around ferry crossings and the weather. With drawings and the programme in hand, the whole mastic package comes with us.
Window perimeters and facade joints around Aith need correct width, depth and backing rod as much as a neat finish. Sites around Aith get mastic sealed to the drawings and the programme, nothing improvised.
Aith is in the Shetland Islands. We send applicators to Aith for facade joints, handled exactly as we handle every other area. Aith is one of 63 places we cover in the Shetland Islands.
If you need facade sealing in ZE2, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are Marthastoon and Wirligert, and sites on any of them can send details for a fixed quote. Being close to the B9071, Aith is straightforward for us to reach. Just outside Aith, we also work in Kalliness (4 miles south-east), Voe (6 miles north-east), Easter Skeld (7 miles south), Dury (7 miles east) and Vassa (8 miles east). Further afield, our area takes in Lerwick (12 miles south-east), Sound (12 miles south-east), Scalloway (11 miles south) and Brae (8 miles north). For island and remote sites, we plan travel and materials carefully.
Near you in Aith
For a walk, there’s Loch of North-House and Russaness Hill.