Expansion and movement joint sealing in Wick, Highland
Sealant work in Wick for main contractors, managing agents and facilities managers: expansion and movement joint sealing in walls, decks and floors, with a fixed quote first.
- Debris jammed in movement joints
- Sealant pulling off the joint face
- Weathered movement joint sealant that no longer flexes
Need expansion joint sealing in Wick?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What we can’t put right
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- A joint that has to be widened or re-detailed before it can work
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- Crumbling edges that would give a new bead nothing sound to grip
If you are not sure, just phone 01277 525 020 or use the quote form and we’ll give you a straight answer.
What we seal
- Blockwork control joints
- Podiums and floor movement joints
- Brickwork movement joints
- Cladding panel joints
- Precast concrete panel joints
- Car park decks and ramps
Expansion joint sealing in Wick
Floor movement joints in warehouses, retail and public buildings carry wheeled traffic. Unsupported edges break up under wheels so the product has to suit both the traffic and the movement. We will tell you if the edges need repairing before sealing, and phased work keeps areas in use. If you have expansion joints split through the centre of the bead and new sealant over old, now failing, we can help, on podiums and floor movement joints, brickwork movement joints and blockwork control joints alike. Most enquiries from Wick start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Around smaller Scottish places like Wick, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Concrete slabs and yards there take vehicles and weather.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Wick (KW1)
- Region
- Highland
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Site staff or a sealant specialist?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Why act early in Wick
Resealing is usually the answer, not replacing the element. If the material either side is sound, a properly prepared reseal restores the joint. If the edges have broken up, we will tell you they need repairing first. Renewing every failing joint on one visit is the sensible approach for a place like Wick. Photos of each area help us quote the whole job.
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Why appoint us
- Products installed to the manufacturer’s instructions
- Commercial sealant work since 2005
- One number for every site we cover
- Colour options checked against the specified product
Read how commercial sealant jobs are priced or our accreditations and insurance.
Expansion joint sealing in Wick: the local picture
Wick lies within about 1 mile of the sea. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, which is why split joints are worth sealing before the edges deteriorate. Wick is in the east of Scotland, which is drier than the west. Freezing weather and salt still attack open external joints. Sealing them in drier months limits winter damage.
Schools like Wick High School often have long brick elevations with movement joints that age quietly. Retail parks like Wick Retail Park (to the south-west of Wick) have long runs of car park and yard joints taking daily traffic.
Wick is in Highland. Wick sits inside our coverage and the rest of Highland, with the same fixed quotes and 12-month guarantee as everywhere else. Wick is one of 256 places we cover in Highland for movement joints.
Postcode districts covered here: KW1. If your site is on Market Street, Argyle Square and High Street or close by, we can quote for movement joints. Wick sits on or close to the A99 and A882, which helps when planning parking and deliveries for the job. Nearby places we also cover include Whiterow (1 mile south), Staxigoe (1 mile north-east), Ackergillshore (2 miles north), Haster (3 miles west) and Reiss (3 miles north-west). Wick ranks among the main centres of Highland, with offices, shops, schools and other public and commercial buildings. For island and remote sites, travel and materials need planning ahead, so the full address helps from the start.
Near you in Wick
Around Wick, our work takes us to commercial buildings near The Alexander Bain pub and Bignold Park and the streets around them. There’s a railway station in Wick itself: Wick station. Well-known places in the area include Wick Heritage Museum (less than half a mile south-west) and Castle of Old Wick (1.2 miles south). Open spaces near Wick include Loch Hempriggs.
Our process
Inspect, seal, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. For work around Wick, we aim for one trip, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- Photos, joint lengths and drawings come to us, or we visit.
- Joint widths and expected movement are checked against what the sealant can take.
- Old sealant and debris are cut out of every joint.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Before we start on site
- Tell us which areas need to stay in use
- Make sure the joints can be reached
- Have the specification and drawings to hand
Getting a fixed quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Related advice
Questions we’re asked in Wick
Will you take on work at estates like Wick Retail Park, close to Wick?
Yes, sites like Wick Retail Park are within our area, along with the rest of Wick. Send details of the unit and the work through our quote form for a quick quote.
Our building in Wick is near the coast: does that change the sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Do you reseal car park expansion joints?
Yes. We use a sealant designed for wheel loads and the expected movement.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators, which many sites require.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
Will you quote for a small job?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
Do you work in Wick?
Yes. Wick is in our area and the rest of Highland, within our coverage of Greater London, South East England and Scotland. For a quote, ring 01277 525 020 or send photos by email.
Common problems we fix in Wick
Repeated failure often traces back to the wrong product. Products not classed for the movement fail early. Movement capability is set out in BS EN ISO 11600.
Any of the following is a good reason to get the joints checked over:
- Water getting into the wall through a failed joint
- Hardened, cracked sealant on exposed facades
- Sealant peeling off one face of the joint
- Water dripping through deck or ramp joints
Across sites such as Lochshell Business Park, which lies north-west of Wick, floor and movement joints can be sealed in phases so units keep working.
What to look for in a quote
- How the existing material will be dealt with
- How they handle RAMS and site documents
- The terms of the workmanship guarantee
- What level of public liability insurance do they hold?
Aftercare for building managers
A few simple habits keep the new joints working:
- Record the sealant used and the date in the O&M file
- Reopen bays and walkways only after the stated cure time
- Inspect exposed joints once the cold weather has passed
- Report split or peeling joint sealant early
Our workmanship on movement joints carries a 12-month guarantee. Keep the handover details, product and date with your O&M records, so the next reseal starts with the facts.
An open joint fills with grit, and a joint full of grit can’t close. The arrises crack and break away under the load and the reseal becomes an edge repair as well. Keeping the seal sound avoids all of that.