Expansion and movement joint sealing in Toab, Shetland Islands
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Toab. Send details for a fixed quote.
- Arrises breaking up along floor joints
- Leaks through car park deck joints onto the level below
- Expansion joints filled with dirt and stones
Expansion joint sealing for Toab sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing in Toab
Width, depth and product all have to work together. Joint width must suit the movement and the movement class of the sealant. For wider joints, many sealant makers recommend a width-to-depth ratio, often around 2:1, and the bead is tooled so it grips the two faces alone. Site teams most often ask us about movement joints with split or torn sealant and water getting into the wall through a failed joint, across cladding panel joints, precast concrete panel joints and podiums and floor movement joints. A specialist sealant contractor works differently from a general builder: on jobs in Toab, preparation and product choice get the time they need.
Around smaller Scottish places like Toab, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Slabs and yards take vehicles, rain and frost.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Where
- Toab (ZE3)
- Wider area
- Shetland Islands
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Common problems we fix in Toab
Sometimes the sealant holds but the substrate breaks away. If the edge of the joint is friable, the bond fails with it, so we tell you if the edges need repairing first.
Common reasons buildings call us in:
- Rain penetration at brick or block movement joints
- Weathered movement joint sealant that no longer flexes
- Sealant pulling off the joint face
- Expansion joints filled with dirt and stones
In and around Toab, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Before you book anyone
- Are they CHAS accredited or on Constructionline?
- The named product and why it was chosen
- Can the work be phased to keep areas open?
- How the joint faces will be prepared and primed
Aftercare for building managers
To get the most from the new sealant:
- Check joints after long freezing spells
- Avoid parking heavy plant or pallets on joint lines
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
- Record the sealant used and the date in the O&M file
Add every elevation, deck and floor joint to your inspection round. Early splits and edges starting to lift show up on a routine check, when they’re still cheap to deal with. If anything looks wrong, phone 01277 525 020 or email a schedule or drawings with photos.
When one joint fails, others of the same age are rarely far behind. Inspecting the whole run is worth the effort so you can prioritise and budget. We can suggest an order, worst joints first.
Leave it or put it right?
A failed joint seal doesn’t mean the slab, panel or wall needs replacing. Where the edges are sound, cutting out and resealing is enough. If the edges have broken up, we’ll tell you they need repairing first. For buildings near Toab, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Why choose Mastic Doctor in Toab
- RAL and finish matching where the product range allows
- 12-month guarantee on workmanship
- Over 20 years of commercial sealing
- Fully insured, including public liability cover
Quoting for work in Toab
Each job is priced on its own details. The things that drive the figure:
- Which sealant the job calls for
- Induction, permit and paperwork requirements
- How much there is to seal
- Travel to remote or island sites
The specified product makes a difference, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Before you send an enquiry
There’s no need for a formal survey. A few details are enough to get going:
- The site address and postcode
- Your programme or deadline
- Clear photos of the problem areas
- How the joints are reached, and at what height
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
FAQs: Toab
Will you travel to Toab on the island?
Yes. Islands are part of our area, Toab included. We group island work where we can and plan around the crossings.
Does a site in Toab have to shut while its joints are sealed?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. The phasing plan comes with the quote.
What hours do you work?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, so we will confirm the curing time on the day.
Do you hold CHAS accreditation?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators, which many sites require.
Our process
Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. Tell us who will meet us and how to get in at your building near Toab. We will confirm the plan with the fixed quote.
- First the joints are inspected, widths measured and the type of failure noted.
- You receive a fixed quote stating the product and the movement it is rated for.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
What we need from you
- Point out parking and an unloading spot
- Confirm the product named in the specification
- Tell us what induction or permit system the site runs
Quotes
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call the office on 01277 525 020 or email us with what you know.
Related advice
Different surfaces, different methods
Podium joints
Podium decks are exposed and often trafficked. A sealant suited to both traffic and exposure is used.
Car park decks and ramps
Water coming through deck joints is the usual first sign. We strip the old seal, prepare the edges and seal again.
Places near Toab
Also in Toab
Slabs, ramps and loading bays in Toab
The sea is no more than about 1 mile from Toab. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so it pays to keep them sealed. Island jobs, Toab among them, are planned around the ferry and the forecast. Send joint sizes and details of the traffic so the right materials come on the crossing.
Around Toab, open joints collect water and debris, and the arrises are the next to go; we will tell you if the edges need repairing first.
Toab is in the Shetland Islands. Anywhere in ZE3, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Toab is one of 63 places we cover in the Shetland Islands for movement joints.
Commercial sites across ZE3 are covered. Sites close to Toab are covered too, including Hestingott (1 mile north-west), Exnaboe (1 mile east), Scatness (1 mile south), Boddam (2 miles north) and South Scousburgh (3 miles north). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you ring 01277 525 020 or email a schedule or drawings.
Around Toab
Well-known places in the area include Shetland Crofthouse Museum (1.9 miles north). Open spaces near Toab include Loch of Huesbreck and Sumburgh Head RSPB reserve.