Expansion and movement joint sealing in Boddam, Shetland Islands
Expansion and movement joint sealing in walls, decks and floors throughout Boddam and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Weathered movement joint sealant that no longer flexes
- Layers of sealant in a movement joint
- Damp inside where a wall movement joint has failed
Expansion joint sealing for Boddam sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Our process
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed before the next one starts. Travel to smaller Scottish places like Boddam is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- We assess the joints on site or from photos, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Preparing the site
- Let building users know which areas are affected
- Let us know about inductions and permits
- Send your site hours and access windows
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to phone 01277 525 020 or email us with what you know.
Read more
Expansion joint sealing in Boddam, done properly
We cover the full range of movement joints: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. Every one calls for a sealant picked for its movement, exposure and traffic and we name it in the quote. The enquiries we see most involve chipped joint edges on forklift routes and sealant peeling off one face of the joint, across podiums and floor movement joints, brickwork movement joints and car park decks and ramps. A single leaking joint is often how a building in Boddam first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Travel to smaller places like Boddam is planned so the work is done in one trip where possible. Send photographs, joint widths and details of the traffic first.
Our workmanship is guaranteed for 12 months. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Boddam (ZE2)
- Wider area
- Shetland Islands
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It won’t put right:
- Crumbling edges that would give a new bead nothing sound to grip
- Movement on a scale no sealant is meant to absorb
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
Not sure which it is? You can call the office on 01277 525 020 or email the details over and we’ll tell you honestly before you book.
Where we work in Boddam
- Brickwork movement joints
- Cladding panel joints
- Car park decks and ramps
- Precast concrete panel joints
- Podiums and floor movement joints
- Blockwork control joints
Warehouse floors and decks around Boddam
Boddam is within about 1 mile of the coast. Open joints in coastal car parks and yards let in salt-laden water as well as grit, and edges left open tend to break up faster. Being on an island, Boddam means planning around ferry times as well as the weather. Joint widths, lengths and the traffic over them help us bring the right fillers and sealants.
For floors and slabs around Boddam, the product is chosen for the traffic and the movement at each joint. A joint near Boddam that has lost its sealant lets in water and grit, and the edges suffer next; we’ll tell you if the edges need repairing first.
Boddam is in the Shetland Islands. Boddam sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 63 places in the Shetland Islands, from busy centres to rural villages.
Commercial sites across ZE2 are covered for movement joints. Among the streets we cover are Millpund, Turniebrae and Hillock, and sites on any of them can send details for a fixed quote. We also cover South Scousburgh (1 mile north-west), Hestingott (2 miles south), Exnaboe (2 miles south), Toab (2 miles south) and Scatness (3 miles south). Boddam ranks among the main centres of the Shetland Islands, with offices, shops, schools and other public and commercial buildings, and we cover them all. Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Near you in Boddam
Well-known places in the area include Shetland Crofthouse Museum (0.6 miles south-east). For a walk, there’s Sumburgh Head RSPB reserve and Loch of Millpund.
Nearby places to Boddam
More services for Boddam
Questions we are asked in Boddam
Will our site in Boddam have to close for joint sealing?
Rarely. Work is phased around your operations. Tell us which hours and entrances we can use and we’ll plan from there.
Is Boddam inside the area you cover, given it’s on an island?
Yes. Islands are part of our area, Boddam included. We group island work where we can and plan around the crossings.
How long will the new sealant last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, so we will confirm the curing time on the day.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
When can you be on site?
We are in the office from 8am until 5pm, Monday to Friday. Tell us your site hours and access windows and the work will be fitted around them.
How the job changes by surface
Cladding panel joints
Metal and composite panels shift considerably as temperatures change. A sealant with the right movement class is chosen, and we will confirm the colours available for the specified product.
Joints between different materials
Hybrid or MS polymer sealants bond to many substrates. We pick the product for the materials and the movement, and confirm it in the quote.
Why it’s worth doing now in Boddam
Resealing is typically the answer, not replacing the element. Where the edges are sound, cutting out and resealing is enough. We will flag where edges need repair before sealing. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Boddam, a repair visit takes planning, so it’s better to act early.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
What you get with us
- CHAS accredited
- A range of standard colours, depending on the product
- One number for every site we cover
- Fully insured
Owners, agents and contractors
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
We work for building owners and managing agents on everything from one building to a spread of sites around Boddam. Several sites can go on one quote, so there’s one set of paperwork to deal with.
General trades versus a specialist
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.