Expansion and movement joint sealing in Stenness, Orkney Islands
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Stenness. Send details for a fixed quote.
- Car park joints leaking onto vehicles below
- New sealant over old, now failing
- Joints packed with grit and debris
Expansion joint sealing near Stenness
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
When something else is needed
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- A joint that has to be widened or re-detailed before it can work
- Concrete or masonry repairs along the arrises
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
Not sure which it is? You can phone 01277 525 020 or email drawings and photos and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Brickwork movement joints
- Blockwork control joints
- Podiums and floor movement joints
- Precast concrete panel joints
- Car park decks and ramps
- Cladding panel joints
Expansion joint sealing for commercial buildings in Stenness
For movement joints in Stenness, photographs and approximate lengths are the best start. Send them through our quote form, and we’ll arrange a site visit if needed, then send a fixed quote that names the sealant. To discuss the joints first, phone 01277 525 020 or email a schedule or drawings. The enquiries we see most involve previous reseals laid over old sealant and rain penetration at brick or block movement joints, on car park decks and ramps, precast concrete panel joints and blockwork control joints. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Stenness is the same: the right product in a properly prepared joint.
Travel to smaller places like Stenness is planned so the work is done in one trip where possible. Send photos, joint widths and details of the traffic first.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.
- Where
- Stenness (KW16)
- Region
- Orkney Islands
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
What the job involves on each surface
Brickwork and blockwork joints
Masonry faces are often porous, dusty or crumbly. We clean them back to sound material and prime where the manufacturer specifies before the bead goes in.
Concrete and precast panel joints
Precast panels often have surface residues that sealant won’t bond to. We prepare the faces thoroughly and prime where the maker calls for it, so the new seal holds.
Floors, slabs and movement joints in Stenness
Stenness is within about 1 mile of the coast. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, so it pays to keep them sealed. Being in the east of Scotland, Stenness gets less rain than the west coast. Freezing weather and salt still attack open external joints. Sealing them before winter limits the damage.
University campuses such as Robert Gordon University Orkney Project (to the south-west of Stenness) have car parks, paved walkways and building elevations with movement joints. In and around Stenness, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Stenness is about 9 miles west of Kirkwall, in the Orkney Islands. Anywhere in KW16, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 51 places in the Orkney Islands, large and small.
Business premises anywhere in KW16 are within our area for movement joints. Just outside Stenness, we also work in Clouston (1 mile south-west), Grimeston (2 miles north), Germiston (2 miles east), Cairston (2 miles west) and Wasbister (3 miles north-west). For island and remote sites, travel and materials need planning ahead.
What’s near Stenness
Nearby you’ll also find Stromness Museum (3.8 miles south-west). For a walk, there’s Mid Hill and Brodgar RSPB Reserve.
Site staff or a sealant specialist?
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Questions about Stenness
Does a site in Stenness have to shut while its joints are sealed?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. Tell us which hours and entrances we can use and we will plan from there.
Does the sea air around Stenness change the choice of sealant?
It can. Coastal exposure works external joints harder than inland weather. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Can you work on car park ramps and decks?
Yes, we do. These joints take wheels, salt and water, so product choice matters.
How long will the new sealant last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Is any job too small?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Do you take on multi-site work?
Yes. Multi-site work and planned programmes are a core part of the service, planned site by site to suit how each building is used.
Do you offer coloured sealant?
It depends on the product. Some ranges are wide, others limited, so we’ll confirm the colours available for the specified product with the quote.
After the work
Keep the joints in good shape with a few simple steps:
- Raise snow-clearing blades over deck joints where possible
- Note which joints were done, when, and with what
- Act on the first tear or lifting edge rather than waiting
- Inspect exposed joints once the cold weather has passed
Our workmanship on movement joints carries a 12-month guarantee. Keep the handover details, product and date with your O&M records so future maintenance isn’t guesswork.
On a multi-storey car park, a failed joint normally shows up as a leak onto the deck underneath. That water often carries de-icing salts with it. Resealing early limits the damage.
How a job runs
Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and move on in phases so staff and visitors can carry on around us. Jobs near Stenness are often grouped with others in the same area, to make the most of each trip. Tell us how flexible your dates are.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- Joint widths and expected movement are checked against what the sealant can take and tell you if the design looks wrong for the movement.
- Every joint is cleared of the failed seal and any grit packed into it.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Before we start on site
- For older buildings, check the asbestos register before work
- Send your site hours and access windows
- Warn occupants and staff about the work
Ask for a quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Advice
Work for main contractors and building owners
We work for building owners and managing agents on everything from one building to a spread of sites. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.