Fire stopping in Stenness
Fire stopping for Stenness, from a contractor working since 2005. Fully insured and CHAS accredited.
- Expanding foam used as fire stopping
- Fire seals cut back for extra cables and never reinstated
- Snag lists that include open service penetrations
Need fire stopping in Stenness?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How the job changes by surface
Plastic pipes
Waste and drainage pipes through floors are a frequent case. Whether sealant alone is acceptable depends entirely on the tested detail, and we won’t substitute it for a specified collar.
Small ducts
Ducts are only sealed with sealant where the detail allows it. Dampers and ductwork systems themselves are outside our work.
Fire stopping in Stenness, done properly
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We don’t hold a third-party fire-stopping installer certificate. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. If you are dealing with unsealed joints where partitions meet the slab and non-fire-rated filler around services, we can put it right. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Stenness is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Refurbishments in small hotels, schools and care homes around places like Stenness can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Stenness (KW16)
- Region
- Orkney Islands
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Other services in Stenness
Questions we’re asked in Stenness
Will you plan work around the academic year at somewhere like Robert Gordon University Orkney Project?
Yes, holiday working periods are the norm on campus jobs. Let us know which documents your site asks for, and we will confirm them alongside the quote.
What do Scotland’s building standards say about service penetrations in Stenness?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it.
How do we ask for a quote?
The quote form is the simplest route, though you can also phone 01277 525 020 or email us. Photos, drawings or a joint schedule help us quote quickly.
When is resealing likely to be due?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
What sealant work can’t fix
Being straight saves everyone time. New sealant won’t cure:
- Deciding what a wall or floor needs, which belongs to the designer
- Plastic pipes whose detail calls for a collar or wrap
- Signing off or certifying a building’s fire stopping
If you’re not sure, just phone 01277 525 020 or email drawings and photos and we will give you a straight answer before you book.
Where we work in Stenness
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Linear gaps at wall heads
- Service gaps in risers
What happens if it’s left?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down and each detail can be checked as we go. For buildings near Stenness, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
Pricing service penetrations depends on how many there are, their condition and the access, and any specification that applies. Ask us for a fixed quote.
Why choose Mastic Doctor in Stenness
- Constructionline member for supplier checks
- Specification-led, product-correct work
- A fixed quote before work starts
- CHAS accredited contractor
See how commercial sealant jobs are priced or how we’re accredited.
Commercial clients in Stenness
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Stenness can sit alongside others in a wider programme.
Site staff or a sealant specialist?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
Compartments and services around Stenness
Island jobs, Stenness among them, are planned around the ferry and the forecast. With the specification and photographs of the openings, the right fire-rated products travel with us. Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with products tested for that end use. We install what’s specified, to the product’s tested detail.
Residences at universities like Robert Gordon University Orkney Project, 3.5 miles south-west of Stenness, have compartment walls that must be resealed whenever services change. In a building such as Stenness Church, any service penetration through a fire-resisting wall should be sealed to the specified detail. For a hotel such as Standing Stones Hotel (under half a mile west of Stenness), penetration seals are worth checking after any refit or services upgrade.
Stenness is about 9 miles west of Kirkwall, in the Orkney Islands. Anywhere in KW16, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Stenness is one of 51 places we cover in the Orkney Islands.
Work on service penetrations is covered throughout KW16. If your building is just outside Stenness, we cover Clouston (1 mile south-west), Grimeston (2 miles north), Germiston (2 miles east), Cairston (2 miles west) and Wasbister (3 miles north-west). For island and remote sites, travel and materials need planning ahead, so include the location in your enquiry.
Local landmarks in Stenness
Well-known places in the area include Stromness Museum (3.8 miles south-west). Not far away are Mid Hill and Brodgar RSPB Reserve.
How a job runs
In a busy building, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed, then handed back before the next one starts. Jobs near Stenness are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Preparing the site
- Confirm the product named in the specification
- Share the asbestos register for older buildings
- Send your site hours and access windows
Quotes
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.