Stenness washroom sealing
Planning work on a washroom in Stenness? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Discoloured joints around urinals and WC pans
- Panel joints letting water behind
- Kitchen worktop joints that can’t be kept clean
Need washroom sealing in Stenness?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
What sets the cost
There’s no standard rate for sealant work, because every site is different. What we take into account:
- Joint width, depth and condition
- Working within restricted access windows
- Distance, for remote addresses
- Which sealant the job calls for
Pricing washrooms and wet areas depends on how many there are, their condition and the access, and any specification that applies. Call for a quote.
Sending details for a quote
We can often quote from photographs and a few details. It helps to include:
- Whether an asbestos survey exists
- What the building is and how it’s used
- Access details, including height
- The site address and postcode
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or phone 01277 525 020 or email the details over to discuss it first.
About our washroom sealing in Stenness
Whether it’s a single toilet block in Stenness or a programme across several buildings, the route is the same: details first, then a fixed quote, then the work, then the 12-month guarantee. Photos and a rough count of basins, urinals, showers and cubicles help us give a quick quote and a site visit is an option. Site teams most often ask us about kitchen worktop joints that can’t be kept clean and complaints from staff, guests or users about tired washrooms, across accessible toilets and changing rooms, showers, trays and wet room floors and kitchens and tea points. A single leaking joint is often how a building in Stenness first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
In smaller Scottish places like Stenness, commercial washrooms are typically in hotels, pubs, schools, care homes and community halls. Black sealant usually can’t be cleaned, so it is removed and replaced with anti-mould sanitary silicone.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Place
- Stenness (KW16)
- Wider area
- Orkney Islands
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Looking after the joints
Problems stay small when the joints are checked regularly. Specifically:
- Include joints in routine washroom inspections
- Make sure washroom ventilation is running
- Don’t leave trays and floors sitting wet
- Note failing joints building by building
Any failure in our workmanship within the 12-month guarantee is ours to put right. After that, a routine look catches failing joints early.
In food areas, cleanability is something environmental health officers look at. Resealing sinks, worktops and splashbacks before an inspection is a simple step.
From enquiry to sign-off
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself usually takes a few hours for one toilet block, with bigger buildings phased across a number of visits, and we clear our waste as we work. For work around Stenness, we aim for one trip, which is why we ask for photographs and a full list first. External joints need a dry spell as well.
- Every room is surveyed and the failed joints listed.
- The fixed quote sets out the rooms, the products and the phasing.
- The whole of the old bead is removed.
- Joints are degreased and dried.
- New anti-mould sealant goes in and is tooled neat.
- Each area is handed back when ready.
Before we start on site
- Clear stock, furniture or equipment away from the joints
- Tell us what induction or permit system the site runs
- For older buildings, check the asbestos register before work
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or email the details over.
Read more
Different surfaces, different methods
Wet-room floors and floor-to-wall joints
Wet floors are common in accessible showers and changing rooms, so their perimeter joints get close attention.
Basins and vanity tops
Vanity tops and basins are splashed all day, so the wall joint and bowl surrounds tend to fail before anything else. We remove the old bead and lay a fresh one of sanitary silicone.
Washroom sealing in Stenness: the local picture
Stenness lies within about 1 mile of the sea, and coastal places often have hotels, guest houses and holiday accommodation with busy seasons. Bathrooms turned round daily in the busy months need sound, cleanable joints, so resealing in the quieter months keeps rooms ready. Stenness is in the east of Scotland, which is drier than the west. Even so, a washroom that doesn’t dry out between uses will see mould get into its sealant.
For a hotel such as Standing Stones Hotel, under half a mile to the west of Stenness, resealing en suites a few rooms at a time keeps the rest available. For a hall at a building such as Stenness Church, resealing the kitchen and toilets can be fitted between bookings.
Stenness is about 9 miles west of Kirkwall, in the Orkney Islands. Stenness sits inside our coverage and the rest of the Orkney Islands, with the same fixed quotes and 12-month guarantee as everywhere else. Across the Orkney Islands, 51 places are covered, Stenness among them.
Postcode districts covered here: KW16. If your building is just outside Stenness, we cover Clouston (1 mile south-west), Grimeston (2 miles north), Germiston (2 miles east), Cairston (2 miles west) and Wasbister (3 miles north-west). Where a site is remote or on an island, travel and materials need planning ahead, so include the location in your enquiry.
Near you in Stenness
Well-known places in the area include Stromness Museum (3.8 miles south-west). Not far away are Mid Hill and Brodgar RSPB Reserve.
Common questions from Stenness clients
Do we have to close all our washrooms in Stenness for resealing?
Rarely all at once: work is phased so some facilities are always available. Each area is handed back once the sealant has cured enough to use.
Can work at a site such as Robert Gordon University Orkney Project fit around teaching?
Yes. We plan campus work around teaching, exams and residence turnarounds. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Who decides which product is used?
The specification comes first, if there is one. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Do you take on multi-site work?
Yes. Multi-site work and planned programmes are a core part of the service, planned site by site to suit how each building is used.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Is it possible to just clean mouldy silicone?
Not for long. Mould grows into the sealant itself, so it comes back however often it’s cleaned. Replacement is the lasting fix.
What we are called out for in Stenness
Washrooms are warm, damp and full of organic residue, and silicone joints hold onto all three. Anti-mould additives help, but in a poorly ventilated room mould can still take hold eventually.
Look out for the following:
- Sealant lifting along a tray edge
- Mould spotting along silicone joints
- Failed sealant behind washroom basins
- Users noticing mouldy joints
Halls of residence and teaching buildings at universities such as Robert Gordon University Orkney Project, 3.5 miles south-west of Stenness, are easiest to reseal during vacations.
What to look for in a quote
- Will RAMS and insurance details be available?
- How joint depth will be controlled
- How long is the guarantee, and what does it include?
- Their plan for phasing and protecting the area
More services for Stenness
Site staff or a sealant specialist?
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.