Expansion joint sealing in Skinner's Hill
Need expansion joint sealing in Skinner's Hill? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Chipped joint edges on forklift routes
- Layers of sealant in a movement joint
- Joints where the bead has lost adhesion
Expansion joint sealing near Skinner's Hill
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Surface by surface
Concrete and precast panel joints
Joints between precast panels open and close with temperature and loading. The sealant needs the right movement capability and a controlled depth.
Brickwork and blockwork joints
Masonry faces are often porous, dusty or crumbly. We clean them back to sound material and prime where the manufacturer specifies.
About our expansion joint sealing in Skinner's Hill
We cover the full range of movement joints: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. The product depends on the movement, the weather and anything that runs over it. The enquiries we see most involve hardened, cracked sealant on exposed facades and torn sealant in brick or block movement joints, on car park decks and ramps, blockwork control joints and podiums and floor movement joints. Looking for mastic applicators who cover Skinner's Hill? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
Smaller community and commercial buildings around Skinner's Hill have their own movement joints in walls and floors. They’re easily forgotten until water gets in or an edge breaks.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Skinner's Hill (PO36)
- Region
- Isle of Wight
- Cover
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
What happens if it’s left?
Patching the worst lengths of a joint can make sense short term. But if the rest of the run is the same age and product, it’s typically not far behind. We can price a patch and a full reseal side by side. Halls, stores and units around places like Skinner's Hill may not be checked every day, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote and we will explain how it’s made up.
What you get with us
- CHAS accredited contractor
- Work to your specification and the manufacturer’s guidance
- 12 months’ guarantee on every job
- Constructionline member
Diagnose, treat, sign off
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, and the work normally takes anything from part of a day to a couple of weeks, depending on joint lengths, widths and access. Jobs in and around smaller places like Skinner's Hill are normally planned as a single visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- We assess the joints on site or from photographs, noting widths and how each has failed.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
What we need from you
- Have the specification and drawings to hand
- Warn occupants and staff about the work
- Arrange parking or a loading space
Getting a fixed quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, call 01277 525 020 or email us.
Related advice
Honest limits
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Cracking or settlement that calls for an engineer’s assessment
- Damaged metal nosings or cover plates over a joint
- Joints too narrow for the movement, which need redesigning by the engineer
If you’re not sure, just phone 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer before you book.
What we seal
- Cladding panel joints
- Car park decks and ramps
- Brickwork movement joints
- Precast concrete panel joints
- Blockwork control joints
- Podiums and floor movement joints
After the work
Cleaning and maintenance staff play a part too. Pass these on to them:
- Keep product details with the building records for the next reseal
- Reopen bays and walkways only after the stated cure time
- Keep scrapers and ploughs from dragging across joint sealant
- Avoid parking heavy plant or pallets on joint lines
Every joint we seal is backed by a 12-month guarantee on workmanship. Record which product went into which joints in the building file.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Damaged edges make the floor rough and wear wheels faster, and the damage spreads along the joint. Keeping the filler or sealant sound protects the floor.
Your questions answered
Is a smaller place like Skinner's Hill outside your area?
Not at all: smaller places are covered as well as towns. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Will you take on work at estates like Langbridge Business Centre, close to Skinner's Hill?
Yes. Our area takes in Skinner's Hill and its surroundings, with estates and business parks such as Langbridge Business Centre included. To start, just phone 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Why has the sealant in our expansion joints split?
Most often the movement is too much for the product or the joint width. That’s why we check width, depth and movement class before quoting, rather than replacing like for like.
Does the weather affect the work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Are you CHAS accredited?
Yes. We’re CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
What about RAMS and site documents?
Each site asks for different documents, so tell us what you need and we will confirm it when we quote.
Where floor joints take the most wear near Skinner's Hill
Skinner's Hill lies within about 2 miles of the sea. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so it pays to keep them sealed. At least three named trading, business or retail sites lie within about 3 miles of Skinner's Hill. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
Business parks such as Langbridge Business Centre (to the north-west of Skinner's Hill) have car parks, paved areas and long brick and panel elevations, all with movement joints. At places like Branstone Business Park, 1 mile to the south-west of Skinner's Hill, joints are sealed a section at a time so operations carry on. Schools like Newchurch Primary School often have long brick elevations with movement joints that age quietly.
Skinner's Hill is about 5 miles south of Ryde, in the Isle of Wight. Anywhere in PO36, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. We work across 125 places in the Isle of Wight, from busy centres to rural villages. There’s a separate page for Portsmouth, about 11 miles away.
If you need expansion joint sealing in PO36, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are Skinner's Hill and Hill Top. Close to Skinner's Hill, our area also takes in Queen's Bower (1 mile south-east), Alverstone Garden Village (1 mile north-east), Alverstone (1 mile east), Lake (2 miles south-east) and Sandown (2 miles east). A short drive away, we cover Newport (5 miles north-west), Ryde (5 miles north), Cowes (8 miles north-west), Ventnor (5 miles south), East Cowes (7 miles north-west) and Oakfield (4 miles north-east). Where a site is remote or on an island, we plan travel and materials carefully.
Around Skinner's Hill
Locally, jobs take us to sites close to Sandown Bay Academy and The Pointer Inn, among other places. The nearest railway station is Sandown station, about 1.7 miles east. Well-known places in the area include Arthur Webster Memorial Hospital for Children (2 miles south-east) and Sandown Castle (2.3 miles east). For a walk, there’s Alverstone Mead and Brading Down.
Places near Skinner's Hill
More services for Skinner's Hill
Owners, agents and contractors
Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Building owners and managing agents use us on everything from one building to a spread of sites around Skinner's Hill. One quote can cover more than one site, which keeps the paperwork simple.