Expansion and movement joint sealing in Kelvingrove, Glasgow
Expansion and movement joint sealing in walls, decks and floors in Kelvingrove and across Glasgow. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Hardened, cracked sealant on exposed facades
- Layers of sealant in a movement joint
- Damp inside where a wall movement joint has failed
Expansion joint sealing for Kelvingrove sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Our process
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work normally takes a short visit for a handful of joints, or several days or more for a car park deck or long runs of facade joints, and our waste is bagged and taken away as we go. Work on a big city site in Scotland usually involves inductions and permits. Tell us the rules and we will work to them.
- Photos, joint lengths and drawings come to us, or we visit.
- Joint widths and expected movement are checked against what the sealant can take and tell you if the design looks wrong for the movement.
- Old sealant and debris are cut out of every joint.
- Any broken arrises or friable edges are flagged before work goes further.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Before we start on site
- Tell staff and tenants when we will be in
- Explain the parking and delivery arrangements
- For older buildings, check the asbestos register before work
Quotes
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. For smaller jobs, photographs and a description will do.
Advice
Expansion joint sealing in Kelvingrove, done properly
We have been sealing expansion and movement joints for over 20 years for contractors, facilities managers and owners. Our applicators are CSCS-carded, we are CHAS accredited and a Constructionline member, and we carry five million pounds of public liability insurance. Workmanship is backed by our 12-month guarantee. If you have previous reseals laid over old sealant and movement joints with split or torn sealant, we can put it right. Searching for sealant specialists in Kelvingrove? We’ve been sealing commercial buildings since 2005.
Scotland’s cities have multi-storey car parks, shopping centres, university and hospital estates, all with movement joints in decks, floors and walls. Failed joints let water in, and repeated frost then works on the edges.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Kelvingrove (G3, G12, G4)
- Region
- Glasgow
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Do you need expansion joint sealing in Kelvingrove?
Sealant peeling cleanly off one side is an adhesion failure. Poor preparation, a skipped primer, or sealant bonded to the back of the joint are typical reasons.
Look out for the following:
- Water dripping through deck or ramp joints
- Water getting into the wall through a failed joint
- Previous reseals laid over old sealant
- Expansion joints split through the centre of the bead
For estates staff at a university like University of Glasgow Gilmorehill Campus (less than half a mile north-west of Kelvingrove), building and paving joints are part of the planned maintenance list.
What your quote should include
- How long is the guarantee, and what does it include?
- Their plan for phasing and protecting the area
- Health and safety accreditation such as CHAS
- Will RAMS and insurance details be available?
Leave it or put it right?
Leaving a failed movement joint rarely stays a small problem. Water and debris get in, the joint jams and the edges spall, so a reseal turns into an edge repair as well. Acting at the first split keeps the cost down. Scottish city buildings take plenty of rain, so a split or hardened joint lets water into the wall. Resealing promptly protects the stone and the interior.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
What you get with us
- One contact handling all your sites
- Products installed to the manufacturer’s instructions
- Standard and matched colours in many product ranges
- RAL and finish matching where the product range allows
See what affects the cost or our accreditations and insurance.
For managing agents and facilities managers
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Kelvingrove. Several sites can go on one quote, so there’s one set of paperwork to deal with.
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules.
Different surfaces, different methods
Car park decks and ramps
Deck and ramp joints take tyre loads, grit and de-icing salts. A trafficable sealant suited to the movement goes in.
Brickwork and blockwork joints
Long brick and block elevations have movement joints at intervals. We use a sealant rated for the movement, typically low-modulus, with backing rod setting the depth.
Nearby places to Kelvingrove
What else we do in Kelvingrove
Warehouse floors and decks around Kelvingrove
The 3 miles around Kelvingrove take in at least three named trading estates, business parks or retail parks. Their warehouses, yards and car parks are exactly where joints take the most punishment. Kelvingrove is on Scotland’s wetter western side. External slab joints left open take plenty of rain. We wait for dry, workable days to seal them.
Across sites such as Kingston Bridge Trading Estate, 1 mile to the south of Kelvingrove, floor and movement joints can be sealed in phases so units keep working. For a centre such as The Savoy Centre, 1 mile east of Kelvingrove, the service yard and car park joints usually need attention first.
Kelvingrove is about 1 mile north-west of Glasgow, in Glasgow. Anywhere in G3, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. 171 places across Glasgow fall within our area, including Kelvingrove.
Anyone looking for expansion joint sealing in G3, G12 and G4 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Kent Road, Eton Lane and Park Road or nearby, we can quote for movement joints. Just outside Kelvingrove, we also work in Finnieston (1 mile south-west), Sandyford (1 mile south-east), Kelvinhaugh (1 mile west), Woodlands (1 mile north-east) and Anderston (1 mile east). Bigger towns within reach include Langside (3 miles south), Yoker (4 miles north-west), Mount Florida (3 miles south), Hillpark (4 miles south), Shawlands (3 miles south) and Muirend (4 miles south).
Around Kelvingrove
Locally, jobs take us to sites close to Kelvingrove Park, College of Piping and Church Street Primary School, among other places. Also close by are St Vincent Street Church (0.8 miles east), Glasgow University Library (0.5 miles north) and The Hengler's Circus pub (0.7 miles east). Kelvingrove has its own railway station: Exhibition Centre station. Other landmarks nearby include Glasgow Museum of Transport (0.5 miles west) and Chinatown (0.9 miles east). The countryside around Kelvingrove includes Hogganfield Loch.
Questions we’re asked in Kelvingrove
Do we have to stop operations in Kelvingrove while the joints are sealed?
Normally not: we work in sections and hand each one back once it has cured. The phasing plan comes with the quote.
Will you take on work at estates like Finnieston Business Park, close to Kelvingrove?
Yes. We cover Kelvingrove and the area around it, including industrial estates, business parks and retail parks such as Finnieston Business Park. To start, just phone 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Do you need to see the site first?
That depends on the size and complexity of the job. Straightforward work can often be priced from photos and measurements, and bigger or more complex jobs typically get a visit.
Do you seal on top of existing sealant?
No. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Does the weather affect joint sealing?
The joint has to be dry, and the air and surface temperature inside the product’s limits. Frost, rain and condensation on steel or concrete can hold up external work so external dates keep some flexibility.
Are you fully insured?
Yes. We’re fully insured, and the certificate can go with your quote.
What sets the cost
We price every job individually. The things that drive the figure:
- Removal of failed or old sealant
- Any access equipment needed
- Phasing around occupants
- Quantities, in metres or numbers
Every site prices differently: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
What we need to price the job
However big the job, these details speed things up:
- Asbestos survey details if the building is older
- Whether the building will be occupied during the work
- When you need the work done
- Rough lengths or quantities, or drawings if you have them
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or ring 01277 525 020 or send details through our quote form to discuss it first.