Expansion joint sealing in Enfield Chase
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Enfield Chase. Send details for a fixed quote.
- Expansion joints filled with dirt and stones
- New sealant over old, now failing
- Damp inside where a wall movement joint has failed
Expansion joint sealing for businesses in Enfield Chase
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Expansion joint sealing for commercial buildings in Enfield Chase
Mastic Doctor has sealed movement joints since 2005, for main contractors, FMs, managing agents and building owners. CHAS accredited, Constructionline member, CSCS-carded applicators and five million pounds of public liability insurance. Each job is backed by a 12-month guarantee on the workmanship. If you’re dealing with layers of sealant in a movement joint and expansion joints split through the centre of the bead, we can help, whatever the surface. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Enfield Chase, that means joint design, primers and backing rod as standard.
London’s floor joints are concentrated in warehouses and trade units, car parks, podiums and decks. Planning a job in Enfield Chase means thinking about access, loading times and the ULEZ as well as the joints.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Location
- Enfield Chase (EN2, N21, EN1)
- Region
- Greater London
- Guarantee
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Where floor joints take the most wear near Enfield Chase
Enfield Chase has at least three named business or industrial parks inside a 3-mile radius. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest. Few London car parks or loading bays can be taken out of use for more than a short spell, so joints are sealed in sections with each area handed back once cured.
At places like Colosseum Retail Park, 1.7 miles to the east of Enfield Chase, joints are sealed a section at a time so operations carry on. Schools like Chase Side Primary School often have long brick elevations with movement joints that age quietly.
Enfield Chase is about 3 miles north-west of Edmonton, in Greater London. We cover Enfield Chase and the rest of Greater London, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Enfield Chase is one of 764 places we cover in Greater London for movement joints. For work in that direction, see our London page, about 11 miles away.
We cover the EN2, N21 and EN1 postcode districts. Streets here include Monks Road, Audley Road and Nunn's Road. Access to Enfield Chase is via the A1005 among other routes, so getting applicators and materials to site is simple. Close to Enfield Chase, our area also takes in Enfield (1 mile east), Gordon Hill (1 mile north-east), Bush Hill (1 mile south-east), Clay Hill (1 mile north-east) and Bush Hill Park (1 mile south-east). Bigger towns within reach include London (11 miles south), City of Westminster (10 miles south), Marylebone (10 miles south), Kensington (12 miles south-west), St Pancras (9 miles south) and Shoreditch (9 miles south).
What’s near Enfield Chase
Locally, jobs take us to sites close to Enfield County School for Girls, The Old Wheatsheaf pub and Enfield Town Park and the streets around them. Enfield Chase has its own railway station: Enfield Chase station. Other landmarks nearby include Edmonton Green Shopping Centre (2.8 miles south-east) and Museum of Enfield (0.8 miles south-east). For a walk, there’s Pole Hill and Oakleigh Park Rail Cutting.
When something else is needed
A proper diagnosis includes knowing what sealant can’t do. You’ll hear from us if the cause turns out to be any of the following:
- Damaged metal nosings or cover plates over a joint
- Waterproofing layers buried beneath the sealant
- Concrete or masonry repairs along the arrises
Not sure which it is? You can call the office on 01277 525 020 or email a schedule or drawings and we will tell you honestly before you book.
Surfaces we seal
- Precast concrete panel joints
- Car park decks and ramps
- Cladding panel joints
- Podiums and floor movement joints
- Blockwork control joints
- Brickwork movement joints
How a job runs
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed before the next one starts. The ULEZ covers the whole of Greater London, and parking near a job is rarely simple. Let us know about any on-site parking or loading arrangements when you send the job details.
- First, the joints are inspected for width, movement and the type of failure.
- Next, we fix a price and confirm the sealant we propose for the movement.
- We strip out the old seal and prepare the faces, flagging any broken edges that need repair before sealing.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- Each joint is inspected and handed over with our 12-month guarantee.
Getting the site ready
- Send any specification or drawings in advance
- Flag any permit to work we’ll need
- For older buildings, check the asbestos register before work
Get a fixed quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.
Related advice
Doing it in-house
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
Why it’s worth doing now in Enfield Chase
Re-sealing with the same product that failed is often a false economy. A higher movement class, or a design change by the engineer, may be needed. In Enfield Chase, each extra visit means more notices, permits and disruption, so cutting the old sealant out fully and doing it right once is the better route.
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
Why clients in Enfield Chase choose us
- Constructionline member for supplier checks
- A fixed quote before work starts
- Health and safety: CHAS accredited
- Coloured sealants to suit the setting, where available
Common problems we fix in Enfield Chase
The edges of the material can fail rather than the sealant. If the edge of the joint is friable, the bond fails with it so edge repair has to come before resealing.
Typical triggers for a call:
- Damp inside where a wall movement joint has failed
- Joints packed with grit and debris
- New sealant over old, now failing
- Sealant peeling off one face of the joint
Sites like The Cavell Hospital (less than half a mile north-west of Enfield Chase) carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Questions to ask before you book
- How the joint faces will be prepared and primed
- Their pre-qualification and accreditations
- Proof of insurance
- Will RAMS and insurance details be available?
Also near Enfield Chase
More services for Enfield Chase
How the job changes by surface
Internal floor movement joints
Floor joints include saw-cut joints and construction joints. A semi-rigid filler is common in trafficked industrial floors and a flexible sealant where the joint moves more.
Joints between different materials
Some mixed-material joints suit a hybrid sealant. We pick the product for the materials and the movement.
FAQs: Enfield Chase
Is a hospital such as The Cavell Hospital somewhere you can work?
Yes, hospitals are one of the sectors we cover. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Can you work at a site such as Enfield Retail Park, by Enfield Chase?
Yes. Our area takes in Enfield Chase and its surroundings, with estates and business parks such as Enfield Retail Park included. A few photos and the unit address let us price the work.
When can the area be used after sealing?
We’ll confirm how long the chosen product needs to cure, and sign any area that should be left alone.
How much does the work cost?
There isn’t a price list, as every site differs. With photos or drawings, we can give you a fixed quote.
Why has the sealant in our expansion joints split?
The way it has failed normally tells us why: a split through the middle points to over-stretching, while peeling from one face points to preparation or primer. Broken edges are a third possibility.
Which sealant will you use?
A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Will you quote for a small job?
Single areas, one-off repairs and whole buildings are all quoted the same way: send details, get a fixed quote, we seal, guaranteed.