Expansion Joint Sealing in Bucksburn
Need expansion joint sealing in Bucksburn? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Expansion joints filled with dirt and stones
- Spalled or broken joint edges in floors and decks
- Joints where the bead has lost adhesion
Expansion joint sealing in Bucksburn
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing in Bucksburn, done properly
For movement joints in Bucksburn, photos and approximate lengths are the best start. Send them through our quote form, and we’ll arrange a site visit if needed, then send a fixed quote that names the sealant. To discuss the joints first, give us a call on 01277 525 020 or email drawings and photos. We work on cladding panel joints, blockwork control joints and brickwork movement joints, and what we are called in for most is previous reseals laid over old sealant and joints where the bead has lost adhesion. For commercial sealant work in Bucksburn, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
In Scottish cities, where newer extensions meet older stone buildings, movement joints take the difference. They need the right movement class and correct width and depth to last.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Where
- Bucksburn (AB21, AB16, AB22)
- Region
- Aberdeen
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
What affects the price in Bucksburn
To price the job, we consider:
- Induction, permit and paperwork requirements
- Whether the work must be split into stages
- Specialist products, such as fire-rated or hygienic sealants
- The size and state of each joint
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote.
Before you send an enquiry
A good diagnosis starts with the right details. Let us know:
- The site address and postcode
- Whether the building will be occupied during the work
- Your programme or deadline
- Asbestos survey details if the building is older
For a fixed quote, speak to us on 01277 525 020 or send photos by email with the site address and an outline of the work. Our quote form is another easy route.
Where floor joints take the most wear near Bucksburn
Bucksburn is on Scotland’s drier eastern side. Freezing weather and salt still attack open external joints. Autumn is a sensible time to seal them. At least three named trading, business or retail sites lie within about 3 miles of Bucksburn. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
Schools such as Bucksburn Academy have movement joints in their walls and floors that are easy to overlook. Campuses like University of Aberdeen - Foresterhill Campus, 2.1 miles south-east of Bucksburn, mix old and new buildings, with movement joints wherever they meet.
Bucksburn is about 3 miles north-west of Aberdeen, in Aberdeen. Commercial clients in Bucksburn use us for work on movement joints. Bucksburn is one of 40 places in Aberdeen on our list.
We cover the AB21, AB16 and AB22 postcode districts for movement joints. For a building on Howes Road, Gilbert Road and Malcolm Road or nearby, we can quote for movement joints. Sites close to Bucksburn are covered too, including Northfield (1 mile south-east), Stoneywood (1 mile north-west), Cummings Park (1 mile south-east), Mastrick (2 miles south) and Danestone (2 miles east). Nearby towns on our patch include Aberdeen (3 miles south-east), Rosemount (3 miles south-east), Berryden (3 miles south-east), Ferryhill (4 miles south-east), New Aberdeen (4 miles south-east) and Queen's Cross (3 miles south-east).
Local landmarks in Bucksburn
Locally, jobs take us to sites close to Northfield Academy, Stewart Park and Bucksburn Manor pub. For rail, the closest station is Dyce station, roughly 2.1 miles north. Well-known places in the area include King's Museum (2.8 miles east) and Bon Accord Centre (3.4 miles south-east). Open spaces near Bucksburn include Rubislaw Quarry and Brimmond Hill.
What sealant work can’t fix
Before quoting, we check that sealant is the right answer. It won’t put right:
- Leaks coming from the membrane rather than the joint seal
- Damaged metal nosings or cover plates over a joint
- Concrete or masonry repairs along the arrises
Not sure which it is? You can speak to us on 01277 525 020 or email drawings and photos and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Brickwork movement joints
- Cladding panel joints
- Precast concrete panel joints
- Blockwork control joints
- Podiums and floor movement joints
- Car park decks and ramps
Leave it or put it right?
On a car park, resealing joints in phases keeps the deck open. Phased work by bay or zone lets the rest stay in use, compared with a full closure. We agree phasing with you before work starts. In a tenement or shared city building, water from a failed joint can reach other owners’ property. Fixing it promptly keeps repairs small.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Why choose Mastic Doctor in Bucksburn
- Standard and matched colours in many product ranges
- Health and safety: CHAS accredited
- CSCS-carded applicators
- RAL and finish matching where the product range allows
Take a look at how commercial sealant jobs are priced and how we’re accredited.
What we’re called out for in Bucksburn
The edges of the material can fail rather than the sealant. If the edge of the joint is friable, the bond fails with it, so we tell you if the edges need repairing first.
Look out for the following:
- Sealant peeling off one face of the joint
- Arrises breaking up along floor joints
- Brittle, chalky sealant on external joints
- Expansion joints split through the centre of the bead
On industrial estates such as Bankhead Industrial Estate (under half a mile north-west of Bucksburn), saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic.
Questions to ask before you book
- Their plan for phasing and protecting the area
- Whether old or failed sealant will be cut out, not overlaid
- How joint depth will be controlled
- Their pre-qualification and accreditations
Building owners, agents and FMs in Bucksburn
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
CHAS accredited and a Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
Also near Bucksburn
Other services in Bucksburn
From enquiry to sign-off
Diagnose, treat, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Work on a big city site in Scotland usually involves inductions and permits. Pass on the site’s contractor rules when you get in touch.
- Photos, joint lengths and drawings come to us, or we visit.
- Joint widths and expected movement are checked against what the sealant can take and tell you if the design looks wrong for the movement.
- Every joint is cleared of the failed seal and any grit packed into it.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Before we start on site
- Let building users know which areas are affected
- Let us know about inductions and permits
- Share the asbestos register for older buildings
Quotes
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, give us a call on 01277 525 020 or send photos by email.
Advice
Common questions from Bucksburn clients
Can you take on a job at a hospital such as Woodend Hospital?
Yes, healthcare and care buildings are part of our work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Must our site in Bucksburn stop work while the joints are done?
In the majority of cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. The phasing plan comes with the quote.
What sealant do you use in movement joints?
The right product depends on the joint. Facades often take a low-modulus silicone; floors and decks typically need a polyurethane, and the specification has the final say.
How long will the joint resealing take?
It typically takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing and phased work can stretch that to suit your site. Cure time before reopening is confirmed on the day.
What exactly is a movement joint?
They’re closely related. A movement joint allows for expansion, contraction, shrinkage and loading.
Can you quote from photographs?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit before quoting.
Can you seal car park deck joints?
Yes. We use a sealant designed for wheel loads and the expected movement, and phased work can be planned so parts of the car park stay in use.