Aberdeen · Scotland
Commercial sealant contractors in AB16
We cover every part of the AB16 postcode district, which takes in Cummings Park, Summerhill and Mastrick. Failed sealant is always cut out completely, with a 12-month guarantee.
Mastic and sealant across AB16
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Areas within AB16
Our services across AB16
- Mastic sealing for building owners and managing agents
- Industrial and floor joint sealing
- Fire-rated sealing and fire stopping
- Facade and window perimeter sealing
- Coloured and colour-matched sealant
- Commercial washroom and wet-area sealing
- Construction and new-build mastic
- Commercial sealant contractors
- Expansion and movement joint sealing
- All services
Let us know the job and your postcode and we’ll come back with a price: call 01277 525 020 or email drawings and photos.
Districts next door
More in Aberdeen
Every town in Aberdeen
Every area we cover
About commercial sealant contractors in AB16
On older buildings, particularly those put up before 2000, some old mastics and sealants may contain asbestos. We ask to see the asbestos register or survey before old sealant is disturbed, since managing asbestos is the dutyholder’s responsibility. Anything suspect is left alone until it has been tested. We work on movement joints in walls and floors, external facade joints and window and door perimeters, and the failures we are asked to look at most are frame mastic that has hardened and come away from the wall and greasy, split joints in a kitchen or tea point.
Inspect, seal, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off.
- We start with the evidence: photos, drawings or a look on site.
- You get a fixed quote covering removal, preparation and the new sealant.
- Sequence, access and working times are settled before the first joint is touched.
- Each joint is stripped, cleaned back to sound faces and primed where the maker specifies.
- Depth is set with backing, then the sealant is applied, tooled and the area tidied.
- Completed areas are signed off with you under our 12-month guarantee.
What you’ll pay
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What you get with us
- Work to your specification and the manufacturer’s guidance
- Fixed quotes based on photos, drawings or a visit
- A range of standard colours, depending on the product
- A Constructionline member, so easy to vet
Getting a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or phone 01277 525 020 or email drawings and photos to discuss it first.
Near you in Cummings Park
Around Cummings Park, our work takes us to commercial buildings near Northfield Academy, Oakbank School and Library and the streets around them. Nearby too are Stewart Park (0.5 miles north-east) and Aberdeen (0.7 miles west). Cummings Park’s nearest station is Aberdeen station, about 2.3 miles south-east of the centre. Nearby you’ll also find Cowdray Medical Pavilion (0.7 miles south-east) and King's Museum (1.7 miles east). The countryside around Cummings Park includes Rubislaw Quarry and Gallows Hill.
Commercial premises across AB16
Shop fits, office refurbishments and hotel refits in towns such as Cummings Park, Summerhill and Mastrick all leave joints that need sealing. Visible joints call for a matched colour and a clean tooled finish.
The west of Scotland is wetter than the east, but external sealing anywhere in Scotland needs a dry joint and the right temperature, with a little give in the programme for wet or frosty days. Coastal places in AB16 often have hotels, guest houses and holiday accommodation with busy seasons, so work is often best planned for quieter months.
Cummings Park: Refits at hotels like Sure Hotel by Best Western Aberdeen (to the south of Cummings Park) bring joints at vanity tops, bars and reception desks that guests see every day. For premises near Aberdeen station, which lies south-east of Cummings Park, footfall is part of the plan: work is phased so shops and offices keep trading.
When something else is needed
A proper diagnosis includes knowing what sealant can’t do. You will hear from us if the cause turns out to be one of these:
- Suspect materials that need testing and specialist removal
- Misted, cracked or failed glazing units (a glazier’s job)
- Walls or slabs moving more than any sealant can take
General trades versus a specialist
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
How the job changes by surface
Facade and cladding joints
Facade joints move every day as panels warm and cool. The product has to suit the movement, and the depth has to be controlled with backing. Access, such as scaffold already up, is agreed before the price is fixed.
Washrooms and toilets
Mould that has grown into washroom sealant can’t usually be cleaned out. Replacement is the fix: strip, clean, dry and reseal, room by room if that suits the building.
Why it fails
In wet areas the enemy is usually mould rather than movement. Constant moisture, cleaning chemicals and weak extraction let mould grow into the sealant, and once established it rarely cleans out. The fix is a new bead of anti-mould sanitary silicone.
Clients typically get in touch after noticing one or more of the following:
- Black mould through washroom sealant that won’t clean off
- Shrunken sealant along kitchen worktops and splashbacks
- Layers of sealant, all of them failing
- Smeared sealant across finishes from a rushed job
Aftercare for building managers
Regular inspection catches problems early. Specifically:
- Report cracked or peeling sealant early
- Make sure ventilation in wet areas is switched on and working
- Ask fit-out and M&E contractors to report any sealant they disturb
- Add sealant to the planned maintenance inspection list
Keep an eye out for other trades after we have gone. Shop refits, new services and replaced fittings often break the seal around them and the joint gets left open. If that happens, ring 01277 525 020 or email drawings and photos and we’ll price putting it right.
In kitchens and washrooms, a failed joint is a cleaning problem as well as a leak risk. Environmental health officers look at how cleanable surfaces are, so sound, smooth joints matter.
Questions we’re asked in AB16
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
When can the area be used after sealing?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
Do you work in AB16?
Yes. Sites across AB16 are covered, with one number for every area we cover.
How do you keep disruption to occupiers down?
We phase the work so parts of the building stay open. Tell us your site hours and access windows and we will plan around them.
How do you choose the sealant?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
How long does a job like this take?
The duration is planned around your programme and the access we are given. You will have an expected duration with the quote.