Expansion and movement joint sealing in Braepark, Edinburgh
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Braepark and the surrounding area. Send photos or drawings for a fixed quote.
- Joints packed with grit and debris
- Layers of sealant in a movement joint
- Arrises breaking up along floor joints
Expansion joint sealing for businesses in Braepark
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When to call us in Braepark
The edges of the material can fail rather than the sealant. Weak or crumbling concrete, brick or render edges give the sealant nothing sound to grip.
These are often picked up first by site or facilities staff:
- Water getting into the wall through a failed joint
- Arrises breaking up along floor joints
- Leaks through car park deck joints onto the level below
- Debris jammed in movement joints
A healthcare site such as Spire Murrayfield Hospital, 2.2 miles to the south-east of Braepark, depends on car parks, ramps and service yards whose joints take traffic all day.
Questions to ask before you book
- Their public liability cover
- Will failed sealant be removed rather than covered?
- The named product and why it was chosen
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Expansion joint sealing for commercial buildings in Braepark
We cover the full range of movement joints: vertical joints in brick and block facades, joints between precast or cladding panels, concrete slab and deck joints, ramps, podiums and internal floors. The product depends on the movement, the weather and anything that runs over it. We work on precast concrete panel joints, blockwork control joints and brickwork movement joints, and the usual reasons a site gets in touch are sealant peeling off one face of the joint and spalled or broken joint edges in floors and decks. Whether you call it commercial sealant work, mastic application or joint sealing, in Braepark it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Industrial estates around Scotland’s cities hold warehouses, trade units and distribution sheds, each with saw-cut and construction joints under forklifts and pallet trucks. We work in phases with a product suited to the traffic, so operations carry on.
A 12-month guarantee applies to all our work. If an installation problem shows up, call the office on 01277 525 020 or email the details over and we will arrange a return visit.
- Where
- Braepark (EH4, EH12, EH30)
- Region
- Edinburgh
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Slabs, ramps and loading bays in Braepark
Braepark sits close to the coast, within about 1 mile. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so a failed joint lets more in and the edges break up sooner. The east of Scotland, where Braepark is, gets less rain than the west. Frost and winter road salt still work into open joints in car parks and yards. Autumn is a sensible time to seal them.
Another example is Corstorphine Retail Park, 1.7 miles to the south of Braepark, where floors and yards would be done in stages around the occupiers. Schools like Craigmount High School often have long brick elevations with movement joints that age quietly.
Braepark is about 4 miles west of Edinburgh, in Edinburgh. Looking for expansion joint sealing in Braepark? We can help. Our Edinburgh coverage takes in 174 places, large and small.
Anyone looking for expansion joint sealing in EH4, EH12 and EH30 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. If your site is on Avon Road, Essex Road and Braehead Road or close by, we can quote for movement joints. Sites close to Braepark are covered too, including Barnton (1 mile south), Cramond (1 mile east), Cammo (1 mile south-west), Bughtlin (1 mile south) and East Craigs (1 mile south). Nearby towns on our patch include Edinburgh (4 miles east), Leith (5 miles east), Bonnington (5 miles east), Greenside (5 miles east), Broughton (5 miles east) and Bellevue (4 miles east).
Landmarks near Braepark
The nearest railway station is Edinburgh Gateway station, about 1.8 miles south. Well-known places in the area include The Gyle Shopping Centre (1.9 miles south) and Corstorphine Hospital (2.1 miles south-east). Green spaces nearby include Corstorphine Hill and Dundas Loch.
Different surfaces, different methods
Podium joints
Podiums take foot traffic, planters and weather. A sealant suited to both traffic and exposure is used.
Internal floor movement joints
Forklift and pallet-truck wheels break unsupported joint edges. The right filler or sealant for the traffic and movement protects them, and tell you if edges need repairing first.
Also in Braepark
Building owners, agents and FMs in Braepark
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so the building keeps working while we do.
Questions about Braepark
Will you take on work at estates like West Craigs Industrial Estate, close to Braepark?
Yes. Estates, retail parks and business parks around Braepark, West Craigs Industrial Estate among them, are all within reach. To start, just ring 01277 525 020 or use the quote form with the unit, the joints involved and your access times.
Can you take on a job at a hospital such as Spire Murrayfield Hospital?
Yes, healthcare and care buildings are part of our work. Each area is agreed with the ward or department and the estates team in advance.
Can a joint be sealed if the edges are broken?
A bond is only as strong as the material behind it, so we will tell you if the edges need repairing before sealing. We flag it at the quote stage where we can see it.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
What timescale should we allow for resealing expansion joints?
Allow a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. We confirm the timescale with the quote.
How do you choose the sealant?
The specification comes first, if there is one. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
What sets the cost
These are the things that shape the price:
- The size and state of each joint
- The site’s rules and procedures
- The total length or number of joints
- Which sealant the job calls for
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote once you have the details.
Before you send an enquiry
Whether it’s one area or a whole building, the same details help:
- A wide shot and a close-up of the area
- How the joints are reached, and at what height
- Asbestos survey details if the building is older
- When you need the work done
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
How a job runs
Diagnose, treat, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Tell us the rules and we will work to them.
- First, the joints are inspected for width, movement and the type of failure.
- A fixed quote follows, naming the sealant and its movement class.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material, and we tell you if any edges need repairing first.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- Finished joints are checked and backed by our 12-month guarantee.
Getting the site ready
- Tell us which areas need to stay in use
- Tell us what induction or permit system the site runs
- Tell staff and tenants when we will be in
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call 01277 525 020 or email the details over with what you know.
Read more
Aftercare for building managers
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. We suggest:
- Treat a small split as a warning, not a cosmetic issue
- Raise snow-clearing blades over deck joints where possible
- Plan racking layouts so feet don’t land on a joint
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
Movement joints belong on the planned maintenance inspection list. Early splits and edges starting to lift show up on a routine check. Should you spot a problem, you can give us a call on 01277 525 020 or send photos by email and send a picture.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Broken arrises jolt trucks, loads and drivers. Sealing early protects the edges.