Braepark coloured sealant
Coloured and colour-matched sealant for visible joints across Braepark, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Failed coloured sealant that has split or peeled
- Previous reseals that don’t match the original
- Dirty, discoloured joints in public areas
Need coloured sealant in Braepark?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Coloured sealant for commercial buildings in Braepark
Natural materials vary across a single elevation: a stone or brick facade shifts in tone from one area to the next. The aim is a sealant colour that sits comfortably against the whole surface. We work on cladding panels, powder-coated and anodised frames and hotel bathrooms and public areas, and the failures we are asked to look at most are shop fits that need consistent sealant colours across sites and a run of joints in mismatched shades. Facilities teams, main contractors and managing agents in Braepark tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Working in a Scottish city means planning around loading rules, shared entrances and busy pavements. Give us your access times and any building rules and we will fit the work around them, phased so offices and shops keep trading.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Braepark (EH4, EH12, EH30)
- Wider area
- Edinburgh
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Frontages, fit-outs and joints in Braepark
Braepark lies within about 1 mile of the sea. Buildings near the sea put their external joints through more driven rain, with salt air nearer the beach. We choose a product rated for the exposure, then confirm the colours available for it. Braepark is on Scotland’s drier eastern side. Frost and condensation on winter mornings can still hold up external sealing.
Offices and shops close to stations such as Edinburgh Gateway station, 1.8 miles to the south of Braepark, tend to be busy all day, so sealant work is planned around opening hours. In hotels such as Leonardo Hotel Edinburgh Murrayfield (1.3 miles south-east of Braepark), refurbishments normally mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes.
Braepark is about 4 miles west of Edinburgh, in Edinburgh. We cover commercial sites throughout Braepark. Our Edinburgh coverage takes in 174 places.
Postcode districts covered here: EH4, EH12 and EH30. Buildings on Avon Road, Essex Road and Braehead Road are within our area for colour-matched joints. We also cover Barnton (1 mile south), Cramond (1 mile east), Cammo (1 mile south-west), Bughtlin (1 mile south) and East Craigs (1 mile south). A short drive away, we cover Edinburgh (4 miles east), Leith (5 miles east), Bonnington (5 miles east), Greenside (5 miles east), Broughton (5 miles east) and Bellevue (4 miles east).
What’s near Braepark
Braepark’s nearest station is Edinburgh Gateway station, roughly 1.8 miles south. A little further out are The Gyle Shopping Centre (1.9 miles south) and Corstorphine Hospital (2.1 miles south-east). For a walk, there’s Corstorphine Hill and Dundas Loch.
Leave it or put it right?
Matching new joints to the existing ones is easier when the whole run is done together. Small repairs at different times rarely match, so a planned reseal often looks better value. Getting access arranged for a building in Braepark takes time, so it makes sense to renew every failing joint while it’s in place.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Why choose Mastic Doctor in Braepark
- Colours confirmed for the specified product
- One phone line for London, the South East and Scotland
- CSCS-carded applicators
- Joints cleaned back to sound surfaces
Take a look at our cost guide or our accreditations.
Cost factors for colour-matched joints
Quotes vary with the job. It mainly depends on:
- Which sealant the job calls for
- The site’s rules and procedures
- The size and state of each joint
- How accessible the joints are
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote.
Before you send an enquiry
Good information means a firmer quote. When you get in touch, include:
- The site address and postcode
- Drawings or a marked-up plan, if available
- Asbestos survey details if the building is older
- How the joints are reached, and at what height
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to speak to us on 01277 525 020 or send details through our quote form.
Questions we are asked in Braepark
Do you cover business parks and estates near Braepark, such as West Craigs Industrial Estate?
Yes. Estates, retail parks and business parks around Braepark, West Craigs Industrial Estate among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
Our building in Braepark is near the coast: does that change the sealant?
It can. Coastal exposure works external joints harder than inland weather. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
How do we ask for a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photos and a postcode.
Do you use coloured sanitary silicone?
Yes. Wet-area sealants are made in colours as well as white. We will confirm what’s available for the specified product before work starts.
Will the sealant be an exact match to our finish?
No. An exact bespoke match isn’t something we can promise. Sealants come in a wide range of standard colours, and we will confirm the colours available for the specified product for your approval.
Are you fully insured?
Yes. We’re fully insured, including public liability cover.
Can you seal to a brand colour across several sites?
Yes. You can phone 01277 525 020 or use the quote form with the colour reference for a quick quote. We plan around trading hours where we can, within our working week.
Diagnose, treat, sign off
Tell us your site hours and access windows and we will plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Give us the access times and building rules for your premises in Braepark, so the work can be phased and areas kept in use.
- First we agree which sealant type the joint needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- The existing bead comes out, then faces are cleaned and backed.
- Edges are masked and the coloured sealant applied and tooled.
- We remove the masking and walk the finished joints with you.
Before we start on site
- Point out parking and an unloading spot
- Tell staff and tenants when we will be in
- Tell us which areas need to stay in use
Ask for a quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Read more
Also in Braepark
Site staff or a sealant specialist?
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Do you need coloured sealant in Braepark?
Mould and staining discolour coloured joints in some areas. Mould that has rooted into a bead rarely cleans out.
Common reasons buildings call us in:
- Discoloured joints on a visible elevation
- Colour changes after a rebrand or refit
- Shop fits that need consistent sealant colours across sites
- Old colour-matched joints lifting at the edges
If you have premises on more than one site, say at West Craigs Industrial Estate and Corstorphine Retail Park, one contractor and one quote can cover both.
Before you book anyone
- Which product they’ll use, and why it suits the joint
- Their plan for phasing and protecting the area
- Their pre-qualification and accreditations
- Whether their applicators hold CSCS cards
How the job changes by surface
Hotel interiors
Phased work can be planned so areas stay in use. Tell us your site hours and access windows and we’ll plan around them with areas kept in use.
Natural stone
Stone has variation, so the aim is a colour that sits naturally against it. A stone-safe neutral-cure product is used.