Cramond expansion joint sealing
Expansion and movement joint sealing in walls, decks and floors throughout Cramond and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Car park joints leaking onto vehicles below
- Arrises breaking up along floor joints
- Expansion joints split through the centre of the bead
Expansion joint sealing in Cramond
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Expansion joint sealing in Cramond
Few joints take as much punishment as those in a car park. Tyres load the edges, and de-icing salts and water work into any gap; water dripping through to the deck below is often the first sign. We reseal deck and ramp joints with a trafficable sealant chosen for the movement, phasing bays so the car park can stay in use. If you are dealing with layers of sealant in a movement joint and spalled or broken joint edges in floors and decks, we can put it right. Looking for mastic applicators who cover Cramond? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
For floor or movement joints around smaller places like Cramond, we plan to finish in one visit where we can. Photos, approximate widths and what uses the floor help us bring the right materials.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Cramond (EH4)
- Region
- Edinburgh
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Aftercare for building managers
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. We suggest:
- Keep traffic off new joints until the cure time is up
- Include every elevation and deck joint in periodic inspections
- Inspect exposed joints once the cold weather has passed
- Act on the first tear or lifting edge rather than waiting
Snow ploughs and scrapers catch on joint lines. Raising blades over joints where possible protects the seal, and it’s worth checking joints once the cold weather has passed.
On a multi-storey car park, a failed joint usually shows up as a leak onto the deck underneath. Salty water dripping through stains soffits and lands on parked vehicles and it can affect the structure over time. Resealing early limits the damage.
Different surfaces, different methods
Car park decks and ramps
Deck and ramp joints take tyre loads, grit and de-icing salts. A trafficable sealant suited to the movement goes in with bays done in phases so the car park keeps running.
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. A semi-rigid filler is common in trafficked industrial floors and a flexible sealant where the joint moves more.
FAQs: Cramond
Can you work on a hospital site such as Spire Murrayfield Hospital?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is Cramond too far out for you?
No. Places such as Cramond are covered as much as the big towns. Our area covers all of Scotland, cities, towns and islands alike. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
How long will the joint resealing take?
That depends on joint lengths, widths, access and how much old sealant or filler needs removing. Typically it takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we’ll schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
What do you charge?
That depends on the job: quantities, access, the product and any phasing. Call for a fixed quote and we’ll price it properly.
Who decides which product is used?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Does the weather affect joint sealing?
Outside work depends on conditions. Indoor joints can usually carry on regardless.
Expansion joint sealing around Cramond: points for this area
Cramond is within about 1 mile of the coast. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, and edges left open tend to break up faster. Being in the east of Scotland, Cramond gets less rain than the west coast. Freezing weather and salt still attack open external joints. Sealing them in drier months limits winter damage.
For estates staff at a university like Edinburgh Napier University - Sighthill Campus, which lies south of Cramond, building and paving joints are part of the planned maintenance list. Retail sites such as Corstorphine Retail Park, 1.7 miles to the south of Cramond, have car park, service yard and shop floor joints under constant traffic.
Cramond is about 3 miles west of Comely Bank, in Edinburgh. Businesses, contractors and managing agents in Cramond can call on us for movement joints, as part of our coverage of Edinburgh. Cramond is one of 174 places in Edinburgh on our list for movement joints.
We take on movement joints across the EH4 postcode area. If your site is on Avon Road, Essex Road and Whitehouse Road or close by, we can quote for movement joints. Sites close to Cramond are covered too, including Braepark (1 mile west), Barnton (1 mile south-west), Cammo (1 mile south-west), Bughtlin (1 mile south) and East Craigs (1 mile south). Further afield, our area takes in Edinburgh (4 miles south-east), Leith (5 miles east), Bonnington (5 miles east), Greenside (4 miles east), Broughton (4 miles east) and Bellevue (4 miles east).
What’s near Cramond
The closest station to Cramond is Edinburgh Gateway station, about 1.9 miles south-west. Other landmarks nearby include The Gyle Shopping Centre (2 miles south) and Craigcrook Castle (1.6 miles south-east). Green spaces nearby include The New Leaf Co-op and Dundas Loch.
Doing it in-house
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Places near Cramond
Also in Cramond
Signs you need expansion joint sealing in Cramond
When the movement exceeds the sealant’s capability, the bead tears. Cohesive failure, a split through the centre, typically means the joint or product wasn’t right for the movement. Resealing like for like often fails the same way unless width and product are reviewed.
Typical triggers for a call:
- Spalled or broken joint edges in floors and decks
- Torn sealant in brick or block movement joints
- Water getting into the wall through a failed joint
- Joints packed with grit and debris
Schools such as Craigmount High School have movement joints in their walls and floors that are easy to overlook.
Questions to ask before you book
- Proof of insurance
- How the existing material will be dealt with
- Will CSCS-carded applicators be on site?
- What site paperwork they can supply
Leave it or put it right?
A failed joint seal doesn’t mean the slab, panel or wall needs replacing. If the material either side is sound, a properly prepared reseal restores the joint. If the edges have broken up, we will tell you they need repairing first. Renewing every failing joint on one visit is the sensible approach for a place like Cramond. Send photos and we will quote for everything together.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What you get with us
- CHAS accredited contractor
- Constructionline member
- Public liability insurance in place
- One number for every site we cover
See our cost guide and our accreditations.
How a job runs
Working in a building that stays open takes some planning. We sign and contain the area we are in, keep walkways clear and work section by section so the rest of the building stays in use. Where we can, we combine work around Cramond with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.
- We assess the joints on site or from photographs, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Before we start on site
- Tell us what induction or permit system the site runs
- Send any specification or drawings in advance
- Point out any areas we must not close
Request a quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or give us a call on 01277 525 020 or email the details over if you’d rather talk the job through.