Sealant specialists in Inch
Sealant work for offices, shops, hotels and other commercial buildings in Inch and across Edinburgh. CHAS accredited and fully insured, with a 12-month guarantee.
- Gaps behind commercial kitchen worktops and sinks
- External beads that have gone brittle and cracked
- Water staining near frames, panels or ceilings
Commercial sealant contractors across Inch
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our commercial sealant contractors in Inch
Getting a price for commercial sealant contractors in Inch doesn’t need to be drawn out. Send photographs, drawings or a schedule of the joints through our quote form and you can also call 01277 525 020 or send details through our quote form to talk it through. Where the photographs don’t tell the full story, we arrange a site visit, followed by a fixed quote rather than an estimate that drifts. If you have messy, uneven beads from earlier work that let the building down and frame sealant that has cracked, shrunk or pulled away, we can help. Whether you call it commercial sealant work, mastic application or joint sealing, in Inch it comes down to the same thing: the right product in a properly prepared joint.
If you look after more than one building near Inch, the work can be planned as one programme, so standards and paperwork match across every site.
Much of the older commercial stock in Scotland’s cities is sandstone or, in Aberdeen, granite. Sealing against stone means a neutral-cure sealant that leaves the stone unmarked and, where the joint is seen, a colour that blends.
Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Place
- Inch (EH16, EH17, EH9)
- Wider area
- Edinburgh
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Commercial clients in Inch
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Inch can form part of a wider programme.
When something else is needed
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Suspect materials that need testing and specialist removal
- Roof leaks that only look like a joint problem
- Walls or slabs moving more than any sealant can take
Not sure which it is? You can speak to us on 01277 525 020 or email a schedule or drawings and we’ll tell you honestly before you book.
Where we work in Inch
- Window and door perimeters
- Kitchen worktops and splashbacks
- Movement joints in walls and floors
- External facade joints
- Washrooms and tea points
- Floor and threshold joints
Commercial sealant contractors in Inch: the local picture
The sea is no more than about 3 miles from Inch. Buildings near the sea put their external joints through more driven rain, with salt air nearer the beach. We choose a product rated for the exposure, then confirm the colours available for it. The area within 2 miles of Inch holds plenty of hotels. In hotels, sealant shows everywhere, from bathroom joints to reception counters, so colour and a clean finish matter, and the work can be phased so the rest of the hotel keeps trading.
Trade counters and showrooms on estates such as Peffermill Industrial Estate (0.9 miles north-east of Inch) need neat joints where customers see them. Refits at hotels like Northumberland Hotel (to the north-west of Inch) bring joints at vanity tops, bars and reception desks that guests see every day.
Inch is about 2 miles south-east of Edinburgh, in Edinburgh. We send applicators to Inch for sealant joints, handled exactly as we handle every other area. Inch is one of 174 places we cover in Edinburgh.
Work on sealant joints is covered throughout EH16, EH17 and EH9, whatever the building. Streets here include Ross Road, Lady Road and Orrok Lane, and sites on any of them can send details for a fixed quote. We also cover Bridge End (1 mile north), Cameron Toll (1 mile north-west), Liberton (1 mile south-west), Little France (1 mile east) and Prestonfield (1 mile north). A short drive away, we cover Leith (4 miles north), Bonnington (3 miles north), Greenside (3 miles north-west), Broughton (3 miles north-west), Bellevue (3 miles north-west) and Silvermills (3 miles north-west).
Local landmarks in Inch
Locally, jobs take us to sites close to St Margaret's School and Inch Park and the streets around them. The nearest railway station is Edinburgh Waverley station, about 2.5 miles north-west of the centre. Other landmarks nearby include Royal Infirmary of Edinburgh (0.7 miles east) and Cameron Toll Shopping Centre (0.5 miles north-west). For a walk, there’s The New Leaf Co-op and Duddingston Loch.
Nearby places to Inch
Other services in Inch
Common problems we fix in Inch
Every sealant joint is a maintenance item. How long one lasts depends on the movement it takes, its exposure to sun and weather, the cleaning regime, the traffic and the product itself. On a busy commercial site several of those pile up at once, so periodic inspection matters more than any date on a schedule.
Clients usually get in touch after noticing something like this:
- Frame sealant that has cracked, shrunk or pulled away
- Leaks that seem to come through a sealant line
- Untidy joints in a reception, shop floor or lobby
- Layers of sealant, all of them failing
A business with units at Peffermill Industrial Estate and Holyrood Business Park needn’t use two contractors for its sealant.
What to look for in a quote
- Health and safety accreditation such as CHAS
- The terms of the workmanship guarantee
- How they handle RAMS and site documents
- Their plan for phasing and protecting the area
Quoting for work in Inch
There’s no standard rate for sealant work, because every site is different. What we take into account:
- Location, for remote and island sites
- Induction, permit and paperwork requirements
- Phasing around occupants
- How accessible the joints are
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote once you have the details.
Before you send an enquiry
We can often quote from photos and a few details. Please tell us:
- The product your specification calls for
- A wide shot and a close-up of the area
- The site address and postcode
- The type of building and who uses it
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. If you have questions first, ring 01277 525 020 or use the quote form.
From enquiry to sign-off
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. Work on a big city site in Scotland normally involves inductions and permits. Tell us the rules and we’ll work to them.
- You send photos, drawings or a list of the joints and areas involved, or we arrange a site visit.
- The failure is diagnosed and a fixed quote issued for the work agreed.
- We plan around your site hours and access windows, phasing the work where areas have to stay in use.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- The depth is set, primer is used where the maker calls for it, and the fresh bead is applied and tooled.
- We walk the completed areas with you and sign them off under the 12-month guarantee.
Getting the site ready
- Warn occupants and staff about the work
- Clear stock, furniture or equipment away from the joints
- Tell us which areas need to stay in use
Request a quote
For a fixed quote, give us a call on 01277 525 020 or send details through our quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Advice
What the job involves on each surface
Facade and cladding joints
Panel joints on cladding and rendered facades open and close with the temperature. They need a sealant with the right movement capability, laid at the right depth. Access, such as scaffold already up, is agreed before the price is fixed.
Commercial kitchens and tea points
In kitchens, sealant lines at worktops, sinks and wall panels take heat, grease and daily cleaning. They’re degreased thoroughly before resealing, and a hygienic or food-safe sealant is used where food contact is possible.
Questions about Inch
Our building in Inch is near the coast: does that change the sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Does a hotel in Inch need to shut while its sealant is renewed?
In most cases no closure is needed: we work room by room or floor by floor. We agree the order of rooms and the timings with you before we start.
Do you take on multi-site sealant work?
Yes. We take on runs of jobs across portfolios as well as single sites, quoted per building or as a package.
Could the old sealant in an older building contain asbestos?
On older buildings, our first request is the asbestos survey. The duty to manage asbestos sits with the dutyholder and removing it isn’t something we do.
How many days will you need on site?
It depends on the scope, but the work typically takes part of a day on a small job and longer where several buildings or phases are involved. For bigger or phased jobs, we’ll set out a timescale with the quote.
How do you keep disruption to occupiers down?
Most of the buildings we work in stay occupied. We agree the order of areas, protect what’s nearby and close off only the section we’re sealing.
Which sealant will you use?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.