Gordon coloured sealant
Sealant work in Gordon for main contractors, managing agents and facilities managers: coloured and colour-matched sealant for visible joints, quoted at a fixed price.
- Hotel refurbishments with a set colour scheme
- Weathered sealant that no longer matches
- Colour changes after a rebrand or refit
Coloured sealant in Gordon
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle coloured sealant in Gordon
Where colour is critical, a sample bead in a discreet spot settles the question. Cured sealant may look a shade different from the wet bead, and lighting changes it again. Let us know who signs off colour, and we’ll fit the sample into the programme. We work on natural stone and brick, powder-coated and anodised frames and shop-fit joinery and counters, and the usual reasons a site gets in touch are standard-colour sealant spoiling a high-end finish and joints that need to match a new RAL frame colour. One point of contact handles commercial sealant work in Gordon from the first photographs to the final walk-round, whether it’s one building or several.
For a job around Gordon, the Scottish weather is part of the planning: outside joints need dry, frost-clear surfaces, so we agree a window with some give in it. Internal joints can be done whatever the day brings.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Gordon (TD3)
- Region
- Scottish Borders
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Signs you need coloured sealant in Gordon
Joints repaired piecemeal often end up in several shades. Mixed repairs over time leave a run of mismatched joints along a shopfront. Doing the full run in a single colour solves it.
These are often picked up first by site or facilities staff:
- Marked sealant in hotel bathrooms
- Hotel refurbishments with a set colour scheme
- Failed coloured sealant that has split or peeled
- Old sealant that has yellowed, darkened or faded
For any commercial premises in Gordon, a lasting joint depends on full removal of the old sealant and clean, dry faces.
Questions to ask before you book
- Will CSCS-carded applicators be on site?
- How joint depth will be controlled
- Which product they’ll use, and why it suits the joint
- Their plan for phasing and protecting the area
Leave it or put it right?
A mismatched or discoloured bead is a small detail that buyers, guests and clients notice, particularly on high-end finishes. Putting it right costs little compared with the finishes around it, and the difference is obvious. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Gordon before they leak.
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote and we will explain how it’s made up.
Why choose Mastic Doctor in Gordon
- 12-month guarantee on workmanship
- CSCS-carded applicators
- Fully insured
- Joints cleaned back to sound surfaces
Read our cost guide and our accreditations.
Your questions answered
Is Gordon too small for you to travel to?
Not at all. Gordon is within our area. We work across every Scottish council area. Good photographs up front let us bring everything on the first visit.
What paperwork can you provide for a job in Gordon?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Do you work on hotel and retail fit-outs?
Yes. Tell us the product and colour reference and we will confirm availability. We plan around trading hours where we can, within our working week.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Does coloured sealant change colour outdoors?
Some change is normal outdoors. UV and grime can soften or alter the colour, which is why exposed joints are inspected and resealed when needed.
How much does the work cost?
We don’t publish prices, because every site is different. With photos or drawings, we can give you a fixed quote.
Are you CHAS accredited?
Yes. We’re CHAS accredited and a Constructionline member.
Coloured sealant in Gordon: the local picture
Gordon is on Scotland’s drier eastern side. Frost and condensation on winter mornings can still hold up external sealing.
Where a joint is on show in Gordon, we’ll check which shades the product offers before work starts.
Gordon is about 10 miles north-east of Galashiels, in the Scottish Borders. Our applicators travel to Gordon for work on colour-matched joints. Gordon is one of 91 places we cover in the Scottish Borders. Our Edinburgh page has more on work in that area, about 31 miles away.
If you need coloured sealant in TD3, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Among the streets we cover are Main Street, Station Road and Murrayfield, and sites on any of them can send details for a fixed quote. Close to Gordon, our area also takes in Smailholm (4 miles south), Westruther (4 miles north), Greenlaw (4 miles north-east), Stichill (5 miles south-east) and Earlston (5 miles south-west). Further afield, our area takes in Galashiels (10 miles south-west), Kelso (7 miles south-east), Selkirk (14 miles south-west), Jedburgh (14 miles south), Duns (11 miles north-east) and Melrose (8 miles south-west).
Around Gordon
Other landmarks nearby include Mellerstain House (2.5 miles south). Open spaces near Gordon include Gordon Moss and Brotherstone Hill.
What we can’t put right
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Cleaning or repairing the surrounding finishes
- Stopping sealant from ever changing colour outdoors
- A guaranteed perfect match to every finish
If in doubt, phone 01277 525 020 or send details through our quote form and we’ll say what we think.
Joints and surfaces we work on
- Office fit-out finishes
- Natural stone and brick
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
- Shop-fit joinery and counters
- Cladding panels
Our process
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Tell us who will meet us and how to get in at your building near Gordon. That goes into the plan alongside the quote.
- We start with photos, drawings or a visit to see the finishes.
- We send the closest colours from the product’s range.
- Tell us your site hours and access windows and we’ll plan around them.
- We prepare each joint, prime where needed and fit backing.
- The agreed colour is installed and tooled neatly.
Getting the site ready
- Share your working hours and any access restrictions
- Move anything stored against the joints
- Confirm the product named in the specification
Getting a fixed quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Read more
Places near Gordon
Other services in Gordon
After the work
A few simple habits keep the new joints working:
- Keep the area clear while the sealant cures
- Keep harsh solvents away from visible joints
- Ask contractors to check the colour before resealing
- Avoid piecemeal repairs on coloured joints
Expect some change in appearance over the years. That is normal for exposed sealant.
Put the sealant colour into the specification or finishes schedule. Late decisions lead to substitutes and mismatches, so agree it with the designer at the start.
Different surfaces, different methods
Hotel interiors
Hotels use colour-matched sealant in bathrooms, bedrooms and public areas. Sanitary silicone comes in colours too, so bathrooms can match the tiling or stone.
Cladding panels
Where panels vary in colour, the joint colour is agreed for the whole elevation. Sometimes a mid-tone suits better than matching one panel.