Melrose coloured sealant
Coloured and colour-matched sealant for visible joints in Melrose and across the Scottish Borders. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Untidy coloured beads with ragged edges
- Previous reseals that don’t match the original
- Hotel refurbishments with a set colour scheme
Coloured sealant for Melrose sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Site staff or a sealant specialist?
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Coloured sealant in Melrose, done properly
We can agree a short trial length before the full run. Sealant can look slightly different once it has cured, and again in different light, so approving a sample on site is worth doing. Let us know who signs off colour, and we will fit the sample into the programme. If you’re dealing with old sealant that has yellowed, darkened or faded and previous reseals that don’t match the original, we can put it right, on hotel bathrooms and public areas, powder-coated and anodised frames and natural stone and brick alike. Facilities teams, main contractors and managing agents in Melrose tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Around smaller places such as Melrose, the commercial buildings tend to be hospitality, local shops, schools, health centres and converted rural buildings. Each has kitchens, washrooms and frames that depend on sound joints.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Location
- Melrose (TD6)
- Wider area
- Scottish Borders
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
For managing agents and facilities managers
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Signs you need coloured sealant in Melrose
Exposure takes its toll on colour. Sunlight, dirt and pollution can darken, yellow or chalk the surface, and an old match drifts. Resealing is the chance to reset the colour.
Clients normally get in touch after noticing one or more of the following:
- Shop fits that need consistent sealant colours across sites
- Stained or mouldy coloured joints in washrooms
- Previous reseals that don’t match the original
- Standard-colour sealant spoiling a high-end finish
A hotel such as The Kings Arms Hotel (to the east of Melrose) shows how much sealant a hospitality building has on show, from bathroom joints to the bar.
Comparing quotes
- Their plan for phasing and protecting the area
- Their pre-qualification and accreditations
- What level of public liability insurance do they hold?
- How long is the guarantee, and what does it include?
Working on commercial sites near Melrose
The area within 2 miles of Melrose holds several hotels. A hotel refurbishment is full of joints that guests will see, and a matched colour keeps them discreet, and the work can be phased so the rest of the hotel keeps trading. Melrose is on Scotland’s drier eastern side. Cold snaps still affect when external joints can be sealed. We plan external frontages and frames around that
Sites a few miles apart, such as Tweedbank Industrial Estate and Borders Innovation Park, can share one programme and one point of contact. Trade counters and showrooms on estates such as Tweedbank Industrial Estate (1.3 miles west of Melrose) need neat joints where clients see them.
Melrose is about 3 miles east of Galashiels, in the Scottish Borders. We cover Melrose and the rest of the Scottish Borders, with the same fixed quotes and 12-month guarantee as everywhere else. 91 places across the Scottish Borders fall within our area, Melrose among them. We also cover Edinburgh, some 30 miles away.
If you need coloured sealant in TD6, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on High Street, Market Square and St Dunstan's Park and the roads nearby. You will find Melrose on or near the B6359 and B6361, so getting applicators and materials to site is simple. Close to Melrose, our area also takes in Gattonside (1 mile north), Darnick (1 mile west), Newstead (1 mile east), Tweedbank (2 miles west) and Bowden (2 miles south). A short drive away, we cover Galashiels (3 miles west), Hawick (12 miles south), Kelso (11 miles east), Selkirk (6 miles south-west), Jedburgh (11 miles south-east) and Wilton (12 miles south).
Near you in Melrose
The nearest railway station is Tweedbank station, about 1.5 miles west. Nearby you’ll also find Commendators House Museum (under half a mile east) and Castle Holydean (2.4 miles south). Open spaces near Melrose include Eildon Hill North and Bemersyde Moss.
What happens if it’s left?
It’s far cheaper to approve a sample than to strip and redo a full run. A sample takes little time. Renewing every failing joint on one visit is the sensible approach for a place like Melrose. Send photographs and we’ll quote for everything together.
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Why us?
- Work carried out by CSCS-carded applicators
- CHAS accredited contractor
- Sealing commercial buildings since 2005
- Colours chosen to suit frames, cladding or finishes where possible
Other services in Melrose
Melrose: questions and answers
Is Melrose too small for you to travel to?
No. Small places get the same service as large ones. We work across every Scottish council area. Good photographs up front let us bring everything on the first visit.
Must a hotel around Melrose close while you work?
Rarely, if ever. We take a few rooms out at a time. Housekeeping and our team agree each day’s rooms.
Can you match any colour exactly?
No. We can’t promise an exact custom match. We will show you the closest colours in the specified product’s range.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Can we approve the colour on site?
Yes. Where colour is critical, we can agree a short sample bead in a discreet spot. The colour can shift a little as it cures, so seeing it in place helps.
When is resealing likely to be due?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Can you send site paperwork?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
On site: what to expect
In a busy building, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before we move to the next. Where we can, we combine work around Melrose with other jobs nearby. Let us know if your dates have any give.
- First we agree which sealant type the joint needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- The existing bead comes out, then faces are cleaned and backed.
- We mask, seal and tool to a clean line.
- We remove the masking and walk the finished joints with you.
Getting the site ready
- Send your site hours and access windows
- Have the specification and drawings to hand
- Agree which areas must stay open
Getting a fixed quote
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. To get it moving, call the office on 01277 525 020 or email the details over.
Related advice
How the job changes by surface
Brick and masonry
On brick, the sealant often matches the mortar rather than the brick face. The nearest colour in the range is agreed with you for the elevation.
Office fit-outs
Office joinery and frames typically follow a colour scheme. We match from the product’s range and agree them before work starts.