Kelso coloured sealant
Coloured and colour-matched sealant for visible joints in Kelso. CHAS accredited and fully insured, with a 12-month guarantee.
- Hotel refurbishments with a set colour scheme
- Smeared sealant on stone or joinery
- Coloured joints that have cracked with movement
Need coloured sealant in Kelso?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle coloured sealant in Kelso
Stone, brick and cladding each bring their own colour challenge: a stone or brick facade shifts in tone from one area to the next. The aim is a sealant colour that sits comfortably against the whole surface, with a sample on site if colour is critical. We work on cladding panels, office fit-out finishes and natural stone and brick, and the failures we are asked to look at most are marked sealant in hotel bathrooms and previous reseals that don’t match the original. Whoever orders the work in Kelso, the brief is normally the same: a clear scope, tidy work and joints that don’t fail again.
Around smaller places such as Kelso, the commercial buildings tend to be hospitality, local shops, schools, health centres and converted rural buildings. Each has kitchens, washrooms and frames that depend on sound joints.
Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Location
- Kelso (TD5)
- Region
- Scottish Borders
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
From enquiry to sign-off
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Travel to smaller Scottish places like Kelso is planned so the job is finished in one visit where possible, so photos, sizes and a full list matter. Outside work also needs a suitable weather window.
- We confirm the joint type and the product it needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- We cut out the existing bead, clean and set the depth.
- We mask, seal and tool to a clean line.
- Masking comes off and the work is checked with you.
Preparing the site
- Tell staff and tenants when we’ll be in
- Flag any permit to work we will need
- Explain the parking and delivery arrangements
Get a fixed quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. For a chat about it beforehand, phone 01277 525 020 or email the details over.
Related advice
Cost factors for colour-matched joints
A fixed quote reflects the actual work. It allows for:
- Site requirements such as inductions and permits
- Whether the work must be split into stages
- How much there is to seal
- Distance, for remote addresses
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What we need to price the job
It doesn’t need to be a full survey. A few details are enough to get going:
- Any specification or named product
- The asbestos register, for older buildings
- The site address and postcode
- What the building is and how it’s used
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call the office on 01277 525 020 or email a schedule or drawings with what you know.
Questions about Kelso
Will our hotel in Kelso need to close for the work?
Rarely, if ever. We take a few rooms out at a time. Housekeeping and our team agree each day’s rooms.
Is Kelso too far out for you?
Not at all: smaller places are covered as well as towns. We cover the whole of Scotland. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
Will sunlight affect the sealant colour?
Exposed sealant can change in appearance over the years. Sunlight, dirt and weathering affect how it looks, which is why exposed joints are inspected and resealed when needed.
Can coloured sealant be used in washrooms and kitchens?
Yes. Wet-area sealants are made in colours as well as white. We will confirm what’s available for the specified product and agree it with you.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Does a coloured sealant perform differently from a standard one?
The product type decides performance, not the colour. The joint gets the product it needs, in a colour from that product’s range.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
Aftercare for building managers
A few simple habits keep the new joints working:
- Avoid abrasive pads on coloured sealant
- Approve a sample bead on high-profile areas
- Insist on the agreed colour for any repair
- Standardise colours across a portfolio
Give the sealant its full cure time before cleaning or handling the area. Fresh coloured beads show fingerprints and dust more easily.
Approve a sample where colour really matters. A sample in real light shows how it will look.
For managing agents and facilities managers
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Kelso can sit alongside others in a wider programme.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
More services for Kelso
What sealant work can’t fix
We check first that sealant really is the fix. It won’t put right:
- Restoring stained stone or masonry next to old sealant
- Paint over sealant on joints that move too much
- A guaranteed perfect match to every finish
If you’re not sure, just speak to us on 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Office fit-out finishes
- Cladding panels
- Natural stone and brick
- Shop-fit joinery and counters
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
Frontages, fit-outs and joints in Kelso
There are several hotels within about 2 miles of Kelso. In hotels, sealant shows everywhere, from bathroom joints to reception counters, so colour and a clean finish matter. Being in the east of Scotland, Kelso gets less rain than the west coast. Cold, frosty mornings and condensation on steel and glass can still delay outside work. We plan external frontages and frames around that
Refits at hotels like Cross Keys Hotel (to the south-west of Kelso) bring joints at vanity tops, bars and reception desks that guests see every day. Sites a few miles apart, such as Rosewood Industrial Estate and Pinnacle Hill Industrial Estate, can share one programme and one point of contact. A unit on an estate like Rosewood Industrial Estate (to the east of Kelso) normally has an office front, a trade counter and staff facilities with joints of their own.
Kelso is about 32 miles south-east of Bonnyrigg, in the Scottish Borders. Looking for coloured sealant in Kelso? We can help. Kelso is one of 91 places in the Scottish Borders on our list. Edinburgh is covered too, some 38 miles away.
We take on colour-matched joints across the TD5 postcode area, whatever the building. Buildings on Horse Market, Station Road and Forestfield are within our area for colour-matched joints. Being close to the A698 and A699, Kelso is easy to get to with materials and equipment. Close to Kelso, our area also takes in Sprouston (2 miles east), Ednam (2 miles north), Heiton (2 miles south-west), Stichill (3 miles north) and Roxburgh (3 miles south-west). Nearby towns on our patch include Galashiels (15 miles west), Jedburgh (10 miles south-west), Duns (13 miles north), Melrose (11 miles west), Earlston (10 miles west) and Lauder (15 miles north-west). Among the larger centres in the Scottish Borders is Kelso, and we take on colour-matched joints for its commercial and public buildings.
What’s near Kelso
Recent enquiries here include premises near The Waggon Inn. A little further out are Kelso Hospital (under half a mile north-west) and Roxburgh Castle (1 mile west).
Different surfaces, different methods
Paintable sealants
Overpainting is most common on internal joints with little movement. If the joint needs a product that can’t be painted, we say so.
Natural stone
Stone facades and stone interiors vary widely. We choose from the product’s range and agree the colour with you before the full run.